Xilinx Zynq MP First Stage Boot Loader 

Release 2021.2   Oct 13 2021  -  07:15:53
NOTICE:  BL31: v2.4(release):xlnx_rebase_v2.4_2021.1_update1-23-g9188496b9
NOTICE:  BL31: Built : 07:41:24, Oct 13 2021


U-Boot 2021.01 (Oct 12 2021 - 09:28:42 +0000)

CPU:   ZynqMP
Silicon: v3
Board: Xilinx ZynqMP
DRAM:  16 GiB
PMUFW:	v1.1
EL Level:	EL2
Chip ID:	zu43dr
NAND:  0 MiB
MMC:   mmc@ff160000: 0
Loading Environment from SPIFlash... SF: Detected n25q00a with page size 256 Bytes, erase size 64 KiB, total 128 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Bootmode: QSPI_MODE
Reset reason:	SOFT 
Net:   
ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 12, interface rgmii-id
eth0: ethernet@ff0c0000
Hit any key to stop autoboot:  2  1  0 
SF: Detected n25q00a with page size 256 Bytes, erase size 64 KiB, total 128 MiB
device 0 offset 0x1e80000, size 0x80000
SF: 524288 bytes @ 0x1e80000 Read: OK
QSPI: Trying to boot script at 20000000
## Executing script at 20000000
Trying to load boot images from qspi0
SF: Detected n25q00a with page size 256 Bytes, erase size 64 KiB, total 128 MiB
device 0 offset 0x1f00000, size 0x6100000
SF: 101711872 bytes @ 0x1f00000 Read: OK
## Loading kernel from FIT Image at 10000000 ...
   Using 'conf-system-top.dtb' configuration
   Trying 'kernel-1' kernel subimage
     Description:  Linux kernel
     Created:      2021-10-12   9:30:57 UTC
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x100000f8
     Data Size:    9394717 Bytes = 9 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00200000
     Entry Point:  0x00200000
     Hash algo:    sha256
     Hash value:   9bf447bd0fe34918dccc3cd10f9d23164b4bdfc70aa53671c08b47e3d5a5324c
   Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at 10000000 ...
   Using 'conf-system-top.dtb' configuration
   Trying 'ramdisk-1' ramdisk subimage
     Description:  petalinux-image-minimal
     Created:      2021-10-12   9:30:57 UTC
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0x10902e54
     Data Size:    62397485 Bytes = 59.5 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: unavailable
     Entry Point:  unavailable
     Hash algo:    sha256
     Hash value:   f88e46261458fb739445e7d14ca28f00ac684837d89161e1f93d3af63fdca895
   Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at 10000000 ...
   Using 'conf-system-top.dtb' configuration
   Trying 'fdt-system-top.dtb' fdt subimage
     Description:  Flattened Device Tree blob
     Created:      2021-10-12   9:30:57 UTC
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x108f5c28
     Data Size:    53596 Bytes = 52.3 KiB
     Architecture: AArch64
     Hash algo:    sha256
     Hash value:   c0b00daedadbbd0f9bc61c434874ddfa55e1f5f37a429fe22165937a70c10778
   Verifying Hash Integrity ... sha256+ OK
   Booting using the fdt blob at 0x108f5c28
   Uncompressing Kernel Image
   Loading Ramdisk to 7a18d000, end 7dd0ec2d ... OK
   Loading Device Tree to 000000007a17c000, end 000000007a18c15b ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Linux version 5.10.0-xilinx-v2021.2 (oe-user@oe-host) (aarch64-xilinx-linux-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP Tue Oct 12 09:30:57 UTC 2021
Machine model: xlnx,zynqmp
earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
printk: bootconsole [cdns0] enabled
efi: UEFI not found.
cma: Reserved 256 MiB at 0x000000006a000000
Zone ranges:
  DMA32    [mem 0x0000000000000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x0000000b7fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x000000007fefffff]
  node   0: [mem 0x0000000840100000-0x0000000b7fffffff]
Zeroed struct page in unavailable ranges: 256 pages
Initmem setup node 0 [mem 0x0000000000000000-0x0000000b7fffffff]
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.2
percpu: Embedded 22 pages/cpu s50968 r8192 d30952 u90112
Detected VIPT I-cache on CPU0
CPU features: detected: ARM erratum 845719
Built 1 zonelists, mobility grouping on.  Total pages: 3870216
Kernel command line:  earlycon console=ttyPS0,115200 clk_ignore_unused root=/dev/ram0 rw uio_pdrv_genirq.of_id=generic-uio
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x0000000066000000-0x000000006a000000] (64MB)
Memory: 15014156K/15726592K available (13952K kernel code, 986K rwdata, 3936K rodata, 2112K init, 586K bss, 450292K reserved, 262144K cma-reserved)
rcu: Hierarchical RCU implementation.
rcu: 	RCU event tracing is enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GIC: Adjusting CPU interface base to 0x00000000f902f000
GIC: Using split EOI/Deactivate mode
random: get_random_bytes called from start_kernel+0x31c/0x524 with crng_init=0
arch_timer: cp15 timer(s) running at 100.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=400000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
rcu: Hierarchical SRCU implementation.
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Detected VIPT I-cache on CPU2
CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Detected VIPT I-cache on CPU3
CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: CRC32 instructions
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
DMI not present or invalid.
NET: Registered protocol family 16
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.112:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
Serial: AMBA PL011 UART driver
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
DRBG: Continuing without Jitter RNG
raid6: neonx8   gen()  2140 MB/s
raid6: neonx8   xor()  1599 MB/s
raid6: neonx4   gen()  2193 MB/s
raid6: neonx4   xor()  1567 MB/s
raid6: neonx2   gen()  2079 MB/s
raid6: neonx2   xor()  1440 MB/s
raid6: neonx1   gen()  1775 MB/s
raid6: neonx1   xor()  1219 MB/s
raid6: int64x8  gen()  1437 MB/s
raid6: int64x8  xor()   771 MB/s
raid6: int64x4  gen()  1602 MB/s
raid6: int64x4  xor()   818 MB/s
raid6: int64x2  gen()  1398 MB/s
raid6: int64x2  xor()   750 MB/s
raid6: int64x1  gen()  1033 MB/s
raid6: int64x1  xor()   517 MB/s
raid6: using algorithm neonx4 gen() 2193 MB/s
raid6: .... xor() 1567 MB/s, rmw enabled
raid6: using neon recovery algorithm
iommu: Default domain type: Translated 
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
EDAC MC: Ver: 3.0.0
zynqmp-ipi-mbox mailbox@ff990400: Registered ZynqMP IPI mbox with TX/RX channels.
FPGA manager framework
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 60932K
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=22 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
NET: Registered protocol family 38
xor: measuring software checksum speed
   8regs           :  2363 MB/sec
   32regs          :  2799 MB/sec
   arm64_neon      :  2380 MB/sec
xor: using function: 32regs (2799 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
xilinx-vdma a0070000.axi_mcdma: Please ensure that IP supports buffer length > 23 bits
xilinx-vdma a0070000.axi_mcdma: Xilinx AXI MCDMA Engine Driver Probed!!
ps_pcie_dma init()
xlnx-platform-dma-driver fd0f0000.rootdma: Hardware reports channel not present
xlnx-platform-dma-driver fd0f0000.rootdma: Unable to read channel properties
xlnx-platform-dma-driver: probe of fd0f0000.rootdma failed with error -524
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Serial: AMBA driver
cacheinfo: Unable to detect cache hierarchy for CPU 0
brd: module loaded
loop: module loaded
mtdoops: mtd device (mtddev=name/number) must be supplied
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
CAN device driver interface
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
rtc_zynqmp ffa60000.rtc: registered as rtc0
rtc_zynqmp ffa60000.rtc: setting system clock to 2018-03-09T14:24:32 UTC (1520605472)
i2c /dev entries driver
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol QCA registered
usbcore: registered new interface driver bcm203x
usbcore: registered new interface driver bpa10x
usbcore: registered new interface driver bfusb
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
EDAC MC0: Giving out device to module 1 controller synps_ddr_controller: DEV synps_edac (INTERRUPT)
EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
zynqmp_firmware_probe Platform Management API v1.1
zynqmp_firmware_probe Trustzone version v1.0
zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: zynqmp pinctrl initialized
securefw securefw: securefw probed
alg: No test for xilinx-zynqmp-aes (zynqmp-aes)
zynqmp_aes firmware:zynqmp-firmware:zynqmp-aes: AES Successfully Registered
alg: No test for xilinx-keccak-384 (zynqmp-keccak-384)
alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ARM CCI_400_r1 PMU driver probed
fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
usbcore: registered new interface driver snd-usb-audio
pktgen: Packet Generator for packet performance testing. Version: 2.75
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
can: controller area network core
NET: Registered protocol family 29
can: raw protocol
can: broadcast manager protocol
can: netlink gateway - max_hops=1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
9pnet: Installing 9P2000 support
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Btrfs loaded, crc32c=crc32c-generic
ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 49, base_baud = 6250000) is a xuartps
printk: console [ttyPS0] enabled
printk: console [ttyPS0] enabled
printk: bootconsole [cdns0] disabled
printk: bootconsole [cdns0] disabled
of-fpga-region fpga-full: FPGA Region probed
xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
zynqmp_pll_disable() clock disable failed for dpll_int, ret = -13
zynqmp-display fd4a0000.display: vtc bridge property not present
zynqmp_pll_set_rate() set divider failed for dpll_int, ret = -13
zynqmp_clk_divider_set_rate() set divider failed for gpu_ref_div1, ret = -13
zynqmp_pll_enable() clock enable failed for dpll_int, ret = -13
------------[ cut here ]------------
dp_audio_ref already disabled
WARNING: CPU: 2 PID: 37 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0
Modules linked in:
CPU: 2 PID: 37 Comm: kworker/2:1 Not tainted 5.10.0-xilinx-v2021.2 #1
Hardware name: xlnx,zynqmp (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--)
pc : clk_core_disable+0xa4/0xb0
lr : clk_core_disable+0xa4/0xb0
sp : ffff800011ae3770
x29: ffff800011ae3770 x28: ffff0008409f2c00 
x27: 0000000000000001 x26: ffff00084e4b3980 
x25: ffff800010f240c8 x24: ffff800010f240a8 
x23: 0000000000000001 x22: ffff000840b04410 
x21: 00000000000266d3 x20: ffff000840ce0200 
x19: ffff000840ce0200 x18: 0000000000000030 
x17: 0000f998ffff0667 x16: 0000000000000000 
x15: ffff000840b92918 x14: ffffffffffffffff 
x13: ffff8000113c3de0 x12: 000000000000033f 
x11: 0000000000000115 x10: ffff8000113efde0 
x9 : 00000000fffff800 x8 : ffff8000113c3de0 
x7 : ffff8000113efde0 x6 : 0000000000000000 
x5 : 0000000000005ff4 x4 : 0000000000000000 
x3 : 0000000000000000 x2 : 00000000ffffffff 
x1 : d45e881a10911d00 x0 : 0000000000000000 
Call trace:
 clk_core_disable+0xa4/0xb0
 clk_disable+0x34/0x50
 xilinx_dp_codec_probe+0x94/0x1cc
 platform_drv_probe+0x54/0xb0
 really_probe+0xe8/0x4b4
 driver_probe_device+0x58/0xc0
 __device_attach_driver+0xa8/0x10c
 bus_for_each_drv+0x78/0xd0
 __device_attach+0xdc/0x17c
 device_initial_probe+0x14/0x20
 bus_probe_device+0x9c/0xa4
 device_add+0x328/0x714
 of_device_add+0x58/0x70
 of_platform_device_create_pdata+0xa4/0xfc
 of_platform_bus_create+0x17c/0x39c
 of_platform_populate+0x58/0xec
 zynqmp_dpsub_probe+0xe8/0x170
 platform_drv_probe+0x54/0xb0
 really_probe+0xe8/0x4b4
 driver_probe_device+0x58/0xc0
 __device_attach_driver+0xa8/0x10c
 bus_for_each_drv+0x78/0xd0
 __device_attach+0xdc/0x17c
 device_initial_probe+0x14/0x20
 bus_probe_device+0x9c/0xa4
 deferred_probe_work_func+0x74/0xb0
 process_one_work+0x1d4/0x380
 worker_thread+0x298/0x4e0
 kthread+0x124/0x130
 ret_from_fork+0x10/0x3c
---[ end trace d915841155610048 ]---
------------[ cut here ]------------
dp_audio_ref already unprepared
WARNING: CPU: 2 PID: 37 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x104
Modules linked in:
CPU: 2 PID: 37 Comm: kworker/2:1 Tainted: G        W         5.10.0-xilinx-v2021.2 #1
Hardware name: xlnx,zynqmp (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
pc : clk_core_unprepare+0xe4/0x104
lr : clk_core_unprepare+0xe4/0x104
sp : ffff800011ae3770
x29: ffff800011ae3770 x28: ffff0008409f2c00 
x27: 0000000000000001 x26: ffff00084e4b3980 
x25: ffff800010f240c8 x24: ffff800010f240a8 
x23: 0000000000000001 x22: ffff000840b04410 
x21: 00000000000266d3 x20: ffff00084e4b2080 
x19: ffff000840ce0200 x18: 0000000000000030 
x17: 0000f998ffff0667 x16: 0000000000000000 
x15: ffff000840b92918 x14: ffffffffffffffff 
x13: ffff8000113c3de0 x12: 00000000000003ed 
x11: 000000000000014f x10: ffff8000113efde0 
x9 : 00000000fffff800 x8 : ffff8000113c3de0 
x7 : ffff8000113efde0 x6 : 0000000000000000 
x5 : 0000000000005ff4 x4 : 0000000000000000 
x3 : 0000000000000000 x2 : 00000000ffffffff 
x1 : d45e881a10911d00 x0 : 0000000000000000 
Call trace:
 clk_core_unprepare+0xe4/0x104
 clk_unprepare+0x30/0x4c
 xilinx_dp_codec_probe+0x9c/0x1cc
 platform_drv_probe+0x54/0xb0
 really_probe+0xe8/0x4b4
 driver_probe_device+0x58/0xc0
 __device_attach_driver+0xa8/0x10c
 bus_for_each_drv+0x78/0xd0
 __device_attach+0xdc/0x17c
 device_initial_probe+0x14/0x20
 bus_probe_device+0x9c/0xa4
 device_add+0x328/0x714
 of_device_add+0x58/0x70
 of_platform_device_create_pdata+0xa4/0xfc
 of_platform_bus_create+0x17c/0x39c
 of_platform_populate+0x58/0xec
 zynqmp_dpsub_probe+0xe8/0x170
 platform_drv_probe+0x54/0xb0
 really_probe+0xe8/0x4b4
 driver_probe_device+0x58/0xc0
 __device_attach_driver+0xa8/0x10c
 bus_for_each_drv+0x78/0xd0
 __device_attach+0xdc/0x17c
 device_initial_probe+0x14/0x20
 bus_probe_device+0x9c/0xa4
 deferred_probe_work_func+0x74/0xb0
 process_one_work+0x1d4/0x380
 worker_thread+0x298/0x4e0
 kthread+0x124/0x130
 ret_from_fork+0x10/0x3c
---[ end trace d915841155610049 ]---
xilinx-dp-snd-codec fd4a0000.display:zynqmp_dp_snd_codec0: Failed to get required clock freq
------------[ cut here ]------------
dp_audio_ref already disabled
WARNING: CPU: 2 PID: 37 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0
Modules linked in:
CPU: 2 PID: 37 Comm: kworker/2:1 Tainted: G        W         5.10.0-xilinx-v2021.2 #1
Hardware name: xlnx,zynqmp (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--)
pc : clk_core_disable+0xa4/0xb0
lr : clk_core_disable+0xa4/0xb0
sp : ffff800011ae3770
x29: ffff800011ae3770 x28: ffff0008409f2c00 
x27: 0000000000000001 x26: ffff00084e4b3980 
x25: ffff800010f240c8 x24: ffff800010f240a8 
x23: 0000000000000001 x22: ffff000840b04410 
x21: 000000000003a4b6 x20: ffff000840ce0200 
x19: ffff000840ce0200 x18: 0000000000000030 
x17: 0000f998ffff0667 x16: 0000000000000000 
x15: ffff000840b92918 x14: ffffffffffffffff 
x13: ffff8000113c3de0 x12: 000000000000049e 
x11: 000000000000018a x10: ffff8000113efde0 
x9 : 00000000fffff800 x8 : ffff8000113c3de0 
x7 : ffff8000113efde0 x6 : 0000000000000000 
x5 : 0000000000005ff4 x4 : 0000000000000000 
x3 : 0000000000000000 x2 : 00000000ffffffff 
x1 : d45e881a10911d00 x0 : 0000000000000000 
Call trace:
 clk_core_disable+0xa4/0xb0
 clk_disable+0x34/0x50
 xilinx_dp_codec_probe+0x110/0x1cc
 platform_drv_probe+0x54/0xb0
 really_probe+0xe8/0x4b4
 driver_probe_device+0x58/0xc0
 __device_attach_driver+0xa8/0x10c
 bus_for_each_drv+0x78/0xd0
 __device_attach+0xdc/0x17c
 device_initial_probe+0x14/0x20
 bus_probe_device+0x9c/0xa4
 device_add+0x328/0x714
 of_device_add+0x58/0x70
 of_platform_device_create_pdata+0xa4/0xfc
 of_platform_bus_create+0x17c/0x39c
 of_platform_populate+0x58/0xec
 zynqmp_dpsub_probe+0xe8/0x170
 platform_drv_probe+0x54/0xb0
 really_probe+0xe8/0x4b4
 driver_probe_device+0x58/0xc0
 __device_attach_driver+0xa8/0x10c
 bus_for_each_drv+0x78/0xd0
 __device_attach+0xdc/0x17c
 device_initial_probe+0x14/0x20
 bus_probe_device+0x9c/0xa4
 deferred_probe_work_func+0x74/0xb0
 process_one_work+0x1d4/0x380
 worker_thread+0x298/0x4e0
 kthread+0x124/0x130
 ret_from_fork+0x10/0x3c
---[ end trace d91584115561004a ]---
------------[ cut here ]------------
dp_audio_ref already unprepared
WARNING: CPU: 2 PID: 37 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x104
Modules linked in:
CPU: 2 PID: 37 Comm: kworker/2:1 Tainted: G        W         5.10.0-xilinx-v2021.2 #1
Hardware name: xlnx,zynqmp (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
pc : clk_core_unprepare+0xe4/0x104
lr : clk_core_unprepare+0xe4/0x104
sp : ffff800011ae3770
x29: ffff800011ae3770 x28: ffff0008409f2c00 
x27: 0000000000000001 x26: ffff00084e4b3980 
x25: ffff800010f240c8 x24: ffff800010f240a8 
x23: 0000000000000001 x22: ffff000840b04410 
x21: 000000000003a4b6 x20: ffff00084e4b3980 
x19: ffff000840ce0200 x18: 0000000000000030 
x17: 0000f998ffff0667 x16: 0000000000000000 
x15: ffff000840b92918 x14: ffffffffffffffff 
x13: ffff8000113c3de0 x12: 000000000000054c 
x11: 00000000000001c4 x10: ffff8000113efde0 
x9 : 00000000fffff800 x8 : ffff8000113c3de0 
x7 : ffff8000113efde0 x6 : 0000000000000000 
x5 : 0000000000005ff4 x4 : 0000000000000000 
x3 : 0000000000000000 x2 : 00000000ffffffff 
x1 : d45e881a10911d00 x0 : 0000000000000000 
Call trace:
 clk_core_unprepare+0xe4/0x104
 clk_unprepare+0x30/0x4c
 xilinx_dp_codec_probe+0x118/0x1cc
 platform_drv_probe+0x54/0xb0
 really_probe+0xe8/0x4b4
 driver_probe_device+0x58/0xc0
 __device_attach_driver+0xa8/0x10c
 bus_for_each_drv+0x78/0xd0
 __device_attach+0xdc/0x17c
 device_initial_probe+0x14/0x20
 bus_probe_device+0x9c/0xa4
 device_add+0x328/0x714
 of_device_add+0x58/0x70
 of_platform_device_create_pdata+0xa4/0xfc
 of_platform_bus_create+0x17c/0x39c
 of_platform_populate+0x58/0xec
 zynqmp_dpsub_probe+0xe8/0x170
 platform_drv_probe+0x54/0xb0
 really_probe+0xe8/0x4b4
 driver_probe_device+0x58/0xc0
 __device_attach_driver+0xa8/0x10c
 bus_for_each_drv+0x78/0xd0
 __device_attach+0xdc/0x17c
 device_initial_probe+0x14/0x20
 bus_probe_device+0x9c/0xa4
 deferred_probe_work_func+0x74/0xb0
 process_one_work+0x1d4/0x380
 worker_thread+0x298/0x4e0
 kthread+0x124/0x130
 ret_from_fork+0x10/0x3c
---[ end trace d91584115561004b ]---
xilinx-dp-snd-codec: probe of fd4a0000.display:zynqmp_dp_snd_codec0 failed with error -22
xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
OF: graph: no port node found in /axi/display@fd4a0000
xlnx-drm xlnx-drm.0: bound fd4a0000.display (ops 0xffff800010e7bac8)
zynqmp-display fd4a0000.display: [drm] Cannot find any crtc or sizes
[drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.display on minor 0
zynqmp-display fd4a0000.display: ZynqMP DisplayPort Subsystem driver probed
spi-nor spi0.0: found n25q00a, expected m25p80
spi-nor spi0.0: trying to lock already unlocked area
spi-nor spi0.0: n25q00a (131072 Kbytes)
4 fixed-partitions partitions found on MTD device spi0.0
Creating 4 MTD partitions on "spi0.0":
0x000000000000-0x000001e00000 : "boot"
0x000001e00000-0x000001e80000 : "bootenv"
0x000001e80000-0x000001f00000 : "bootscr"
0x000001f00000-0x000008000000 : "kernel"
macb ff0c0000.ethernet: Not enabling partial store and forward
libphy: MACB_mii_bus: probed
macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 36 (0a:01:02:03:99:99)
xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM
xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM
xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.1.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x0000000002010810
xhci-hcd xhci-hcd.1.auto: irq 59, io mem 0xfe200000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.0-xilinx-v2021.2 xhci-hcd
usb usb1: SerialNumber: xhci-hcd.1.auto
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.0-xilinx-v2021.2 xhci-hcd
usb usb2: SerialNumber: xhci-hcd.1.auto
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
si5341 3-0074: Chip: 5340 Grade: 0 Rev: 3
random: fast init done
i2c i2c-0: Added multiplexed i2c bus 3
i2c i2c-0: Added multiplexed i2c bus 4
i2c i2c-0: Added multiplexed i2c bus 5
at24 6-0050: supply vcc not found, using dummy regulator
at24 6-0050: 2048 byte 24c16 EEPROM, writable, 16 bytes/write
i2c i2c-0: Added multiplexed i2c bus 6
ti-dac5571 7-004c: supply vref not found, using dummy regulator
i2c i2c-0: Added multiplexed i2c bus 7
i2c i2c-0: Added multiplexed i2c bus 8
i2c i2c-9: of_i2c: modalias failure on /axi/i2c@ff020000/i2c-mux@70/i2c@6/clock-generator@59
i2c i2c-9: Failed to create I2C device for /axi/i2c@ff020000/i2c-mux@70/i2c@6/clock-generator@59
i2c i2c-0: Added multiplexed i2c bus 9
si570 10-0056: registered, current frequency 125000000 Hz
i2c i2c-0: Added multiplexed i2c bus 10
pca954x 0-0070: registered 8 multiplexed busses for I2C switch pca9548
cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 38
pca953x 11-0020: supply vcc not found, using dummy regulator
pca953x 11-0020: using no AI
i2c i2c-1: Added multiplexed i2c bus 11
ucd9000 12-0034: Failed to read device ID
i2c i2c-1: Added multiplexed i2c bus 12
i2c i2c-1: Added multiplexed i2c bus 13
tmp401 14-004c: Detected TI TMP401 chip
i2c i2c-1: Added multiplexed i2c bus 14
i2c i2c-1: Added multiplexed i2c bus 15
i2c i2c-1: Added multiplexed i2c bus 16
i2c i2c-1: Added multiplexed i2c bus 17
i2c i2c-1: Added multiplexed i2c bus 18
pca954x 1-0070: registered 8 multiplexed busses for I2C switch pca9548
cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 39
cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer with timeout 60s
cdns-wdt ff150000.watchdog: Xilinx Watchdog Timer with timeout 10s
of_cfs_init
of_cfs_init: OK
cfg80211: Loading compiled-in X.509 certificates for regulatory database
mmc0: SDHCI controller on ff160000.mmc [ff160000.mmc] using ADMA 64-bit
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 DG4032 29.1 GiB 
mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB, chardev (245:0)
 mmcblk0: p1
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
clk: Not disabling unused clocks
ALSA device list:
  No soundcards found.
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
Freeing unused kernel memory: 2112K
Run /init as init process
INIT: version 2.97 booting

zynqmp-display fd4a0000.display: [drm] Cannot find any crtc or sizes
Starting udev
udevd[260]: starting version 3.2.9
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
udevd[261]: starting eudev-3.2.9
si5340_consumer: loading out-of-tree module taints kernel.
si5340_consumer: loading out-of-tree module taints kernel.
si5340-consumer kernel module init.
si5340-consumer aurora0_refclk: Device Tree Probing
si5340-consumer aurora1_refclk: Device Tree Probing
si5340-consumer oc_refclk: Device Tree Probing
FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
IRQ_Number = 58
zynqmp_device_init():
zynqmp: Major number registered = 242
zynqmp: Minor number registered = 0
zynqmp: Done zynqmp_device_init
Configuring packages on first boot....
 (This may take several minutes. Please do not power off the machine.)
Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
 Removing any system s
INIT: Entering runlevel: 5

Configuring network interfaces... [   10.657297] macb ff0c0000.ethernet eth0: PHY [ff0c0000.ethernet-ffffffff:0c] driver [TI DP83867] (irq=POLL)
[   10.667048] macb ff0c0000.ethernet eth0: configuring for phy/rgmii-id link mode
udhcpc: started, v1.32.0
udhcpc: sending discover
udhcpc: sending discover
[   14.764067] macb ff0c0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control tx
[   14.771676] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
udhcpc: sending discover
udhcpc: no lease, forking to background
done.
Starting haveged: haveged: command socket is listening at fd 3
haveged: haveged starting up



Starting Dropbear SSH server: Waiting for kernel randomness to be initialised...
haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 10.2.0 CTV); collect: 128K


haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 15456/64452


haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 7.9983


haveged: haveged: fills: 0, generated: 0 


[   20.639927] random: crng init done
[   20.643370] random: 7 urandom warning(s) missed due to ratelimiting
Generating 2048 bit rsa key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC8DNreNxbvfx/YEsFNYoK2nFYa1eJAOSHMqr45JM3q/8ZxqNKQWVxI9kINbyEVClOJZp+xjR/d69qrGF07qL255KLD59xecD6vGw1hwVkCYgfOsU4dUdYjjKhQnouuiIVW+xY1gR1fu0YmkMmZd5DAzzFvjFTuPYctQ5P1IE0iNCYILT1Vd7jl+1NsXv8VhVfJdNmSuLdtNWr1goSpmIK6SN+TTBbbzAn4t56RSjA1wdWwl1q+YUQJfrevroXHlofi3pjUstaPMwdABVHGqYoWz7yAFLbmivuJ6B8txna9syf83gYbhgcDKWLx7I3s76b8UJ2mxLummotdwpuR7DmD root@rfx8440
Fingerprint: sha1!! 21:14:37:12:b4:0c:f0:e4:1a:3b:c8:54:eb:30:c7:03:76:e6:a5:ac
dropbear.
Starting internet superserver: inetd.
Starting syslogd/klogd: done
IPaddr = 192.168.1.11
Setting ref_source        : ref_source = 0 
Setting ref_freq          : ref_freq = 100.0 
Setting sysref_freq       : sys_ref = 10.0 
Setting rx_samplefreq     : adc_sample_rate = 5000.0 
Setting rx_reffreq        : adc_ref = 250.0 
Setting rx_plfreq         : adc_pl_clk = 125.0 
Setting tx_samplefreq     : dac_sample_rate = 5000.0 
Setting tx_reffreq        : dac_ref = 250.0 
Setting tx_plfreq         : dac_pl_clk = 125.0 
Results                   : {'status': 'Success'}
/media/sd-mmcblk0p1/rfxutils/init.sh: line 39:   751 Segmentation fault      /media/sd-mmcblk0p1/rfxutils/rfxutils/support/RFX_Tool.elf AdcSampleRate=$rx_samplefreq DacSampleRate=$tx_samplefreq AdcPlClk=$rx_plfreq DacPlClk=$tx_plfreq > /media/sd-mmcblk0p1/rfxutils/RFX_Tool.log
Results                   : {'FirmwareTimestamp': '08-Dec-21 13:21:18',
                          :  'FirmwareVersion': '0x101',
                          :  'HardwareConfig': '0x0',
                          :  'HardwareType': '0xc',
                          :  'HardwareVersion': '0x0',
                          :  'RFXUtilsTimestamp': '09-Aug-21 19:55:10',
                          :  'RFXUtilsVersion': '2.1.0',
                          :  'RX_Channels': '16',
                          :  'RX_Enabled': '',
                          :  'RX_Streams': '8',
                          :  'RX_Triggerduration': 'infinite',
                          :  'RX_Triggersource': 'int',
                          :  'RX_Triggertype': 'level',
                          :  'Serial_Number': 'N/A',
                          :  'TX_Channels': '16',
                          :  'TX_Enabled': '',
                          :  'TX_Streams': '16',
                          :  'TX_Triggerduration': 'infinite',
                          :  'TX_Triggersource': 'int',
                          :  'TX_Triggertype': 'level',
                          :  'status': 'Success'}
Starting tcf-agent: OK


PetaLinux 2021.2 rfx8440 /dev/ttyPS0



rfx8440 login: 
