MeshRight

Drop a 3D model here

STL, 3MF, OBJ, PLY, GLB, OFF or AMF, or a point cloud (XYZ, ASC, PTS). It stays on this computer.

Several files? Choose or drop them together to fix them all at once.

Help

Keyboard shortcuts. The view keys match Meshmixer where they can.

CtrlO
Open a file
CtrlE
Export
CtrlS
Save as a MeshRight project
CtrlZ
Undo
CtrlY
Redo
F
Fit the model in view
W
Wireframe on or off
P
Show problems on or off
O
Overhangs on or off
Q
Rough spots on or off
C
Cut view on or off
M
Measure
[ ]
Smaller or bigger brush (when sculpting)
G R S
Move, turn or resize (when combining models)
Esc
Stop the current tool
?
This list

Mouse: drag to turn the view, right-drag or two-finger drag to pan, scroll to zoom.

MeshRight

This only asks GitHub for the latest version number, once a day. Your models never leave this computer.

Clean up

Checking what needs doing…

Still broken after cleaning? Make Solid rebuilds the whole model as one closed solid. Detail finer than about 0.2 mm is softened.

Which printer do you use?

MeshRight uses it to check the model fits, and to suggest sensible sizes. You can change it any time.

Fix several files

Best way to print

Trying different ways to place it…

Support amounts are estimates for comparing options; your slicer makes the real supports.

Make a bust

For a scan of a head, or head and shoulders. Closes the opening at the neck, cuts the ragged bottom off flat, adds a base and sizes it.

Stand the head upright first. If it is lying down, use Which way is up?

Make a part

Turns the blue area into a solid piece shaped to fit it, such as a pad, a grip or a cover. It opens as a new model; this one stays as it is.

Hollow for resin

Makes the inside hollow to save resin, keeping walls of this thickness, with drain holes at the bottom so trapped resin can run out.

Wall thickness

Measuring…

Give it thickness

Turns an open surface, such as a face scan, mask or relief, into a solid shell. The scanned surface stays as it is; the thickness goes behind it.

2 mm suits most filament prints. Use at least twice your nozzle size.

Which way is up?

Finding likely bottoms…