ZF ZephyrForge{{ dashboard_type }} · App v{{ app_version }}
Disconnected

Dashboard

Device information

Product --
Board
--
MCU
--
Serial / UID--
System clock--
Firmware version--
Module memory --
Internal SRAM reserved / total
--
External PSRAM reserved / total
--
Module SPI flash capacity
--

Reserved RAM includes linked regions and heap pools, not live usage. SPI flash is external to the ESP32-S3; it has no on-chip flash. PSRAM is RAM, not flash. -- means unavailable or not reported by this firmware.

Boot configuration

Pin configuration
Monitor UART
Storage

Live diagnostics

Uptime
--
Reset cause
--
Service load (Core 0 / Core 1)
-- / --
Board temperature
--
Storage bus speed
--

USB storage ownership

Save and reboot?

Target board
System clock (current to proposed)

Firmware saves boot settings, then reboots the board and briefly disconnects USB. Stop external traffic first.

Reboot board?

This immediately reboots the board and briefly disconnects USB. Stop external traffic first.

Discard unsaved changes and switch boards?

Unsaved configuration and wireless edits, including any newly generated Control key, will be discarded.

Connect to Wi-Fi

Scan for nearby networks or enter a network name. A connection test does not save credentials to flash.

Bluetooth control key

Generate a new key, copy it to a safe location, and save it with Boot configuration. The key authenticates control commands; it does not encrypt the Bluetooth connection. The board cannot show a saved key again.