Station
Reading station status.
Reading station status.
Connect the saved port, or use the mock arm without hardware.
Connect to calibrate skips the saved motor range.
Do this once per adapter.
Only this adapter should disappear.
No port found yet.
Plug it back in, then save.
Set each joint's midpoint, then move every joint except wrist roll through its travel and save the limits.
Connect to calibrate first if the arm has no saved range. Motion stays locked until a range is stored.
The agent is the only camera client.
Loading camera profiles.
No stream
Demo is synthetic. reCamera needs 192.168.42.1 on the USB network; RealSense needs the vision extra.
Connect the arm and the camera on Hardware.
Ten fixed poses. The arm moves by itself, so keep the area clear.
Connect the arm and the camera, then turn torque on.
Settle with one AprilTag in view, then capture.
Four poses minimum, spread about two rotation axes.
Hold the 8 by 11 board in view. Tilt it across the image. Ten views required.
Saves fx, fy, and distortion into the active camera profile.
Hold a key or button. Esc stops.
Gripper: —.
| Joint | Deg | Limits |
|---|
Click the table. A newer click cancels the move.
No click yet.
Click the image.
No pick yet.
Click inside a box. The arm picks its centre.
No pick yet.
When boxes overlap, the smallest one under the click is selected.
| Label | Score | Centre px |
|---|