espp CAN Bridge Console (WebUSB / Web Serial)

Disconnected

This browser supports neither WebUSB nor Web Serial. Use a Chromium-based browser (Chrome / Edge / Opera) on a secure origin (https, localhost or file://).

Device

show all USB devices (no VID/PID filter)

Not connected. WebUSB default filter: VID 0x1209 / PID 0x0d32 (espp default); the vendor (0xFF) interface is discovered from the descriptors at runtime.

Bus configuration

Baud rate

Mode

Bus: unknown Baud: - Mode: - RX: 0 TX: 0 Err: 0

Send frame

ID (hex)

Extended (29-bit) RTR (remote)

DLC (blank = auto)

Data (hex bytes, e.g. "DE AD BE EF")

Monitor

Autoscroll Per-ID summary

0 frames (0 dropped)

Time	Dir	ID	Type	DLC	Data	ASCII

Log

log raw frames

Speaks the espp stream_frame v2 protocol (magic "OT" + flags + module + type + len + payload + CRC-32) carrying the USB<->CAN bridge message set on module 5. Works over WebUSB (vendor 0xFF interface) or Web Serial; frames for other modules/types on the stream are ignored so the bridge can multiplex other protocols.