SetIS8751987

SetIS8751987

Syntax

SapObject.SapModel.LoadPatterns.AutoWind.SetIS8751987

VB6 Procedure

Function SetIS8751987(ByVal Name As String, ByVal ExposureFrom As Long, ByVal DirAngle As Double, ByVal Cpw As Double, ByVal Cpl As Double, ByVal UserZ As Boolean, ByVal TopZ As Double, ByVal BottomZ As Double, ByVal WindSpeed As Double, ByVal Terrain As Long, ByVal Class As Long, ByVal K1 As Double, ByVal K3 As Double, Optional ByVal UserExposure As Boolean = False) As Long

Parameters

Name

The name of an existing Wind-type load pattern.

ExposureFrom

This is either 1 or 2, indicating the source of the wind exposure.

1 = From extents of rigid diaphragms

2 = From area objects

DirAngle

The direction angle for the wind load. This item applies only when ExposureFrom = 1.

Cpw

The windward coefficient, Cp. This item applies only when ExposureFrom = 1.

Cpl

The leeward coefficient, Cp. This item applies only when ExposureFrom = 1.

UserZ

This item is True if the top and bottom elevations of the wind load are user specified. It is False if the elevations are determined by the program.

TopZ

This item applies only when the UserZ item is True. It is the global Z-coordinate at the highest level where auto wind loads are applied. [L]

BottomZ

This item applies only when the UserZ item is True. It is the global Z-coordinate at the lowest level where auto wind loads are applied. [L]

WindSpeed

The wind speed in meters per second.

Terrain

This is 1, 2, 3 or 4, indicating the terrain category.

Class

This is 1, 2 or 3, indicating the terrain category.

1 = A

2 = B

3 = C

K1

The risk coefficient (k1 factor).

K3

The topography factor (k3 factor).

UserExposure

If this item is True, the wind exposure widths are provided by the user. If it is False, the wind exposure widths are calculated by the program from the extents of the diaphragms.

Remarks

This function assigns auto wind loading parameters for Indian IS875-1987.

The function returns zero if the parameters are successfully assigned; otherwise it returns a nonzero value.

VBA Example

Sub AssignWindIS8751987()

'dimension variables

Dim SapObject as cOAPI

Dim SapModel As cSapModel

Dim ret As Long

'create Sap2000 object

Set SapObject = CreateObject("CSI.SAP2000.API.SapObject")

'start Sap2000 application

SapObject.ApplicationStart

'create SapModel object

Set SapModel = SapObject.SapModel

'initialize model

ret = SapModel.InitializeNewModel

'create model from template

ret = SapModel.File.New3DFrame(BeamSlab, 2, 144, 3, 336, 2, 432)

'define diaphragm constraints

ret = SapModel.ConstraintDef.SetDiaphragm("Diaph1", Z)

ret = SapModel.ConstraintDef.SetDiaphragm("Diaph2", Z)

'assign points to diaphragm

ret = SapModel.SelectObj.ClearSelection

ret = SapModel.SelectObj.PlaneXY("2")

ret = SapModel.PointObj.SetConstraint("", "Diaph1", SelectedObjects)

ret = SapModel.SelectObj.ClearSelection

ret = SapModel.SelectObj.PlaneXY("3")

ret = SapModel.PointObj.SetConstraint("", "Diaph2", SelectedObjects)

ret = SapModel.SelectObj.ClearSelection

'add new load pattern

ret = SapModel.LoadPatterns.Add("WIND", LTYPE_WIND)

'assign IS8751987 parameters

ret = SapModel.LoadPatterns.AutoWind.SetIS8751987("WIND", 1, 0, 0.8, 0.5, False, 0, 0, 60, 3, 3, 1.1, 1.2)

'close Sap2000

SapObject.ApplicationExit False

Set SapModel = Nothing

Set SapObject = Nothing

End Sub

Release Notes

Initial release in version 11.01.

Changed nomenclature from Load Cases, Analysis Cases and Response Combinations to Load Patterns, Load Cases and Load Combinations, respectively, in version 12.00.

See Also

GetIS8751987