Vlan3030 is up, line protocol is up
    IP address 10.115.128.4/24
    Process ID 2000 VRF default, area 0.0.0.1
    Enabled by interface configuration
    State DR, Network type BROADCAST, cost 1000
    Index 118, Passive interface
Vlan997 is up, line protocol is up
    IP address 10.100.17.81/30
    Process ID 2000 VRF default, area 0.0.0.1
    Enabled by interface configuration
    State P2P, Network type P2P, cost 10
    Index 137, Transmit delay 1 sec
    1 Neighbors, flooding to 1, adjacent with 1
    Timer intervals: Hello 10, Dead 40, Wait 40, Retransmit 5
    Hello timer due in 00:00:04
    No authentication
    Number of opaque link LSAs: 1, checksum sum 0xe038
loopback100 is up, line protocol is up
    IP address 10.100.0.11/32
    Process ID 2000 VRF default, area 0.0.0.1
    Enabled by interface configuration
    State LOOPBACK, Network type LOOPBACK, cost 1
    Index 50
Ethernet1/31 is up, line protocol is up
    IP address 10.100.31.252/31
    Process ID 2000 VRF default, area 0.0.0.1
    Enabled by interface configuration
    State P2P, Network type P2P, cost 100
    Index 3, Transmit delay 1 sec
    1 Neighbors, flooding to 1, adjacent with 1
    Timer intervals: Hello 2, Dead 6, Wait 6, Retransmit 5
    Hello timer due in 00:00:01
    Message-digest authentication, using key id 1
    Number of opaque link LSAs: 1, checksum sum 0xafaf
Ethernet1/45 is up, line protocol is down
    IP address 10.111.3.2/30
    Process ID 2000 VRF default, area 0.0.0.1
    State DOWN, Network type P2P, cost 100
    Index 1, Transmit delay 1 sec
    0 Neighbors, flooding to 0, adjacent with 0
    Timer intervals: Hello 10, Dead 40, Wait 40, Retransmit 5
    No authentication
    Number of opaque link LSAs: 0, checksum sum 0
port-channel1001 is up, line protocol is up
    IP address 10.100.31.197/30
    Process ID 1000 VRF GENIE-CORE, area 0.0.0.1
    Enabled by interface configuration
    State P2P, Network type P2P, cost 10
    BFD is enabled
    Index 5, Transmit delay 1 sec
    1 Neighbors, flooding to 1, adjacent with 1
    Timer intervals: Hello 2, Dead 6, Wait 6, Retransmit 5
    Hello timer due in 00:00:01
    No authentication
    Number of opaque link LSAs: 0, checksum sum 0
Ethernet1/2 is up, line protocol is up
    IP address 10.100.31.27/31
    Process ID 1000 VRF GENIE-CORE, area 0.0.0.1
    Enabled by interface configuration
    State P2P, Network type P2P, cost 20
    Index 1, Transmit delay 1 sec
    1 Neighbors, flooding to 1, adjacent with 1
    Timer intervals: Hello 2, Dead 6, Wait 6, Retransmit 5
    Hello timer due in 00:00:01
    Message-digest authentication, using key id 1
    Number of opaque link LSAs: 0, checksum sum 0
