-------------------------------------------------------------------------------
RDing TEMPer USB-based temperature sensor
---

---

This is a set of example captures of the I2C/USB/other traffic on an
RDing TEMPer USB-based temperature sensor.

The device consists of a Fairchild FM75 temperature sensor, an unknown
I2C EEPROM, and an unknown "main chip" (20 pins) which does USB
(low-speed, HID), among other things.

Details:
http://sigrok.org/wiki/RDing_TEMPer

## Most files

The logic analyzer used was a CWAV USBee SX (at 12MHz):

Probe RDing TEMPer

---

0 (black) I2C SDA (FM75)
1 (brown) I2C SCL (FM75)
2 (red) OS (FM75)
3 (orange) USB DM (main chip)
4 (yellow) USB DP (main chip)
5 (green) LED (a pin on the main chip)

The sigrok command line used was:

sigrok-cli -d 0:samplerate=12mhz --time <time> \
 -p 1=SDA,2=SCL,3=OS,4=DM,5=DP,6=LED -o <file>

## rding_temper_i2c_eeprom_and_sensor.sr

The logic analyzer used was a CWAV USBee SX (at 2MHz):

Probe RDing TEMPer

---

0 (black) I2C SDA (FM75)
1 (brown) I2C SCL (FM75)
2 (red) OS (FM75)

The sigrok command line used was:

sigrok-cli -d 0:samplerate=2mhz --time <time> -p 1=SDA,2=SCL,3=OS -o <file>
