# Zemax-compatible lens data for: AC254-050-C
# Description: AC254-050-C achromat f=50 mm
#
# Test conditions
#   Primary wavelength: 1.3100 um
#   Source: collimated on-axis plane wave
#   Aperture: clear semi-diameter = 6.0000 mm (diameter 12.0000 mm)
#   Stop surface index: 1
#   Paraxial EFL (at this wavelength): 45.109 mm
#   Residual (piston+tilt+defocus) RMS (slant): 25.14 nm
#   Expected OPD in Zemax: compare to the piston+tilt+defocus-removed trace; the two should agree to the Zemax sampling limit for aberration shape (spherical, coma, higher).
#
# Paste into the Zemax Lens Data Editor (Sequential mode)
# Columns: SURF | TYPE | RADIUS [mm] | THICKNESS [mm] | MATERIAL | SEMI-DIA [mm] | CONIC | COMMENT
#
# SURF TYPE                  RADIUS        THICKNESS   MATERIAL   SEMI-DIA    CONIC  COMMENT
  OBJ  STANDARD            Infinity         Infinity         --      0.000    0.000  Object at infinity
 * STO  STANDARD           33.300000         9.000000    N-BAF10     6.0000   0.0000  surface 1
   2    STANDARD          -24.100000         3.000000    N-SF6HT     6.0000   0.0000  surface 2
   3    STANDARD          -95.300000        45.108949         --     6.0000   0.0000  surface 3
   IMA  STANDARD            Infinity         0.000000         --     0.0000   0.0000  Image plane
#
# Legend: "*" marks the aperture stop.
# To verify OPD in Zemax: Analysis > Wavefront > Wavefront Map, or Analysis > Aberrations > Optical Path Difference (OPD fan).
# Remember to set Aperture Type -> "Float By Stop Size" and the primary wavelength to match the value listed above.
