GetASCE705

GetASCE705

Syntax

SapObject.SapModel.LoadPatterns.AutoWind.GetASCE705

VB6 Procedure

Function GetASCE705(ByVal Name As String, ByRef ExposureFrom 
 As Long, ByRef DirAngle As Double, ByRef Cpw As Double, ByRef Cpl As Double, 
 ByRef ASCECase As Long, ByRef ASCEe1 As Double, ByRef ASCEe2 As Double, 
 ByRef UserZ As Boolean, ByRef TopZ As Double, ByRef BottomZ As Double, 
 ByRef WindSpeed As Double, ByRef ExposureType As Long, ByRef ImportanceFactor 
 As Double, ByRef Kzt As Double, ByRef GustFactor As Double, ByRef Kd As 
 Double, ByRef SolidGrossRatio As Double, ByRef UserExposure As Boolean) 
 As Long

Parameters

Name

The name of an existing Wind-type load pattern with 
 an ASCE7-05 auto wind assignment.

ExposureFrom

This is 1, 3 or 4, indicating the source of the wind 
 exposure.

1 = From extents of rigid 
 diaphragms

2 = From area objects

3 = From frame objects 
 (open structure)

4 = From area objects and 
 frame objects (open structure)

DirAngle

The direction angle for the wind load. This item applies 
 only when ExposureFrom = 1, 3, or 4. 

Cpw

The windward coefficient, Cp. This item applies only 
 when ExposureFrom = 1.

Cpl

The leeward coefficient, Cp. This item applies only 
 when ExposureFrom = 1.

ASCECase

This is 1, 2, 3, 4 or 5, indicating the desired case 
 from ASCE7-05 Figure 6-9. 1, 2, 3 and 4 refer to cases 1 through 4 in 
 the figure. 5 means to create all cases. This item applies only when ExposureFrom 
 = 1.

ASCEe1

This is the value e1 in ASCE7-05 Figure 6-9. This item 
 applies only when ExposureFrom = 1.

ASCEe2

This is the value e2 in ASCE7-05 Figure 6-9. This item 
 applies only when ExposureFrom = 1.

UserZ

This item is True if the top and bottom elevations of 
 the wind load are user specified. It is False if the elevations are determined 
 by the program.

TopZ

This item is the global Z-coordinate at the highest 
 level where auto wind loads are applied. [L]

BottomZ

This item is the global Z-coordinate at the lowest level 
 where auto wind loads are applied. [L]

WindSpeed

The wind speed in miles per hour.

ExposureType

This is 1, 2 or 3, indicating the exposure category.

1 = B

2 = C

3 = D

ImportanceFactor

The importance factor.

Kzt

The topographical factor.

GustFactor

The gust factor.

Kd

The directionality factor.

SolidGrossRatio

The solid area divided by the gross area ratio for open 
 frame structure loading. This item applies only when the loading is from 
 open structure wind loading (ExposureFrom = 3 or ExposureFrom = 4).

UserExposure

If this item is True, the wind exposure widths are provided 
 by the user. If it is False, the wind exposure widths are calculated by 
 the program from the extents of the diaphragms.

Remarks

This function retrieves auto wind loading parameters 
 for ASCE 7-05.

The function returns zero if the parameters are successfully 
 assigned; otherwise it returns a nonzero value.

VBA Example

Sub GetWindASCE705()

'dimension variables

Dim SapObject as cOAPI

Dim SapModel As cSapModel

Dim ret As Long

Dim ExposureFrom As Long

Dim DirAngle As Double

Dim Cpw As Double

Dim Cpl As Double

Dim ASCECase As Long

Dim ASCEe1 As Double

Dim ASCEe2 As Double

Dim UserZ As Boolean

Dim TopZ As Double

Dim BottomZ As Double

Dim WindSpeed As Double

Dim ExposureType As Long

Dim ImportanceFactor As Double

Dim Kzt As Double

Dim GustFactor As Double

Dim Kd As Double

Dim SolidGrossRatio As Double

Dim UserExposure As Boolean

'create Sap2000 object

Set SapObject = CreateObject("CSI.SAP2000.API.SapObject")

'start Sap2000 application

SapObject.ApplicationStart

'create SapModel object

Set SapModel = SapObject.SapModel

'initialize model

ret = SapModel.InitializeNewModel

'create model from template

ret = SapModel.File.New3DFrame(BeamSlab, 
 2, 144, 3, 336, 2, 432)

'define diaphragm constraints

ret = SapModel.ConstraintDef.SetDiaphragm("Diaph1", 
 Z)

ret = SapModel.ConstraintDef.SetDiaphragm("Diaph2", 
 Z)

'assign points to diaphragm

ret = SapModel.SelectObj.ClearSelection

ret = SapModel.SelectObj.PlaneXY("2")

ret = SapModel.PointObj.SetConstraint("", 
 "Diaph1", SelectedObjects)

ret = SapModel.SelectObj.ClearSelection

ret = SapModel.SelectObj.PlaneXY("3")

ret = SapModel.PointObj.SetConstraint("", 
 "Diaph2", SelectedObjects)

ret = SapModel.SelectObj.ClearSelection

'add new load pattern

ret = SapModel.LoadPatterns.Add("WIND", 
 LTYPE_WIND)

'assign ASCE705 parameters

ret = SapModel.LoadPatterns.AutoWind.SetASCE705("WIND", 
 1, 0, 0.8, 0.5, 2, 0.15, 0.18, False, 0, 0, 80, 3, 1, 1.1, 0.85, 0.88)

'get ASCE705 parameters

ret = SapModel.LoadPatterns.AutoWind.GetASCE705("WIND", 
 ExposureFrom, DirAngle, Cpw, Cpl, ASCECase, ASCEe1, ASCEe2, UserZ, TopZ, 
 BottomZ, WindSpeed, ExposureType, ImportanceFactor, Kzt, GustFactor, Kd, 
 SolidGrossRatio, UserExposure)

'close Sap2000

SapObject.ApplicationExit False

Set SapModel = Nothing

Set SapObject = Nothing

End Sub

Release Notes

Initial release in version 11.01.

Changed nomenclature from Load Cases, Analysis Cases 
 and Response Combinations to Load Patterns, Load Cases and Load Combinations, 
 respectively, in version 12.00.

See Also

SetASCE705