OSCAP Scan Result

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow-utils; then

var_account_disable_post_pw_expiration='30'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/default/useradd"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^INACTIVE")

# shellcheck disable=SC2059
printf -v formatted_output "%s=%s" "$stripped_key" "$var_account_disable_post_pw_expiration"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^INACTIVE\\>" "/etc/default/useradd"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^INACTIVE\\>.*/$escaped_formatted_output/gi" "/etc/default/useradd"
else
    # \n is precaution for case where file ends without trailing newline
    cce="CCE-83627-0"
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "/etc/default/useradd" >> "/etc/default/useradd"
    printf '%s\n' "$formatted_output" >> "/etc/default/useradd"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83627-0
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.6
  - NIST-800-53-AC-2(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-4(e)
  - PCI-DSS-Req-8.1.4
  - account_disable_post_pw_expiration
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_account_disable_post_pw_expiration # promote to variable
  set_fact:
    var_account_disable_post_pw_expiration: !!str 30
  tags:
    - always

- name: Set Account Expiration Following Inactivity
  lineinfile:
    create: true
    dest: /etc/default/useradd
    regexp: ^INACTIVE
    line: INACTIVE={{ var_account_disable_post_pw_expiration }}
  when: '"shadow-utils" in ansible_facts.packages'
  tags:
  - CCE-83627-0
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.6
  - NIST-800-53-AC-2(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-4(e)
  - PCI-DSS-Req-8.1.4
  - account_disable_post_pw_expiration
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow-utils; then

var_accounts_maximum_age_login_defs='365'


grep -q ^PASS_MAX_DAYS /etc/login.defs && \
  sed -i "s/PASS_MAX_DAYS.*/PASS_MAX_DAYS     $var_accounts_maximum_age_login_defs/g" /etc/login.defs
if ! [ $? -eq 0 ]; then
    echo "PASS_MAX_DAYS      $var_accounts_maximum_age_login_defs" >> /etc/login.defs
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83606-4
  - CJIS-5.6.2.1
  - NIST-800-171-3.5.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.4
  - accounts_maximum_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_maximum_age_login_defs # promote to variable
  set_fact:
    var_accounts_maximum_age_login_defs: !!str 365
  tags:
    - always

- name: Set Password Maximum Age
  lineinfile:
    create: true
    dest: /etc/login.defs
    regexp: ^#?PASS_MAX_DAYS
    line: PASS_MAX_DAYS {{ var_accounts_maximum_age_login_defs }}
  when: '"shadow-utils" in ansible_facts.packages'
  tags:
  - CCE-83606-4
  - CJIS-5.6.2.1
  - NIST-800-171-3.5.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.4
  - accounts_maximum_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow-utils; then

var_accounts_minimum_age_login_defs='1'


grep -q ^PASS_MIN_DAYS /etc/login.defs && \
  sed -i "s/PASS_MIN_DAYS.*/PASS_MIN_DAYS     $var_accounts_minimum_age_login_defs/g" /etc/login.defs
if ! [ $? -eq 0 ]; then
    echo "PASS_MIN_DAYS      $var_accounts_minimum_age_login_defs" >> /etc/login.defs
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83610-6
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.3.9
  - accounts_minimum_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_minimum_age_login_defs # promote to variable
  set_fact:
    var_accounts_minimum_age_login_defs: !!str 1
  tags:
    - always

- name: Set Password Minimum Age
  lineinfile:
    create: true
    dest: /etc/login.defs
    regexp: ^#?PASS_MIN_DAYS
    line: PASS_MIN_DAYS {{ var_accounts_minimum_age_login_defs }}
  when: '"shadow-utils" in ansible_facts.packages'
  tags:
  - CCE-83610-6
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.3.9
  - accounts_minimum_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

awk -F: '$3 == 0 && $1 != "root" { print $1 }' /etc/passwd | xargs --no-run-if-empty --max-lines=1 passwd -l

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_minclass='4'






# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minclass")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minclass"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minclass\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^minclass\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    cce="CCE-83563-7"
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83563-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minclass # promote to variable
  set_fact:
    var_password_pam_minclass: !!str 4
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Different Categories -
    Ensure PAM variable minclass is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minclass
    line: minclass = {{ var_password_pam_minclass }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83563-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_minlen='14'






# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^minlen\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    cce="CCE-83579-3"
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83579-3
  - CJIS-5.6.2.1.1
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 14
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure PAM variable
    minlen is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minlen
    line: minlen = {{ var_password_pam_minlen }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83579-3
  - CJIS-5.6.2.1.1
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_remember='5'
var_password_pam_remember_control_flag='requisite,required'


var_password_pam_remember_control_flag="$(echo $var_password_pam_remember_control_flag | cut -d \, -f 1)"

if [ -f /usr/bin/authselect ]; then
    if authselect list-features minimal | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "$PAM_FILE_PATH"
                else
                    echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else
    if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "/etc/pam.d/password-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/password-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "/etc/pam.d/password-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/password-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "/etc/pam.d/password-auth"
            else
                echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "/etc/pam.d/password-auth"
            fi
        fi
    fi
fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/password-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/password-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP '^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks 's/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/password-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "$PAM_FILE_PATH"
        else
            echo 'password    '"requisite"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*\sremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks '/\s*password\s+'"requisite"'\s+pam_pwhistory.so.*/ s/$/ remember='"$var_password_pam_remember"'/' "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks 's/(\s*password\s+'"requisite"'\s+pam_pwhistory.so\s+.*)('"remember"'=)[[:alnum:]]+\s*(.*)/\1\2'"$var_password_pam_remember"' \3/' "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_remember # promote to variable
  set_fact:
    var_password_pam_remember: !!str 5
  tags:
    - always
- name: XCCDF Value var_password_pam_remember_control_flag # promote to variable
  set_fact:
    var_password_pam_remember_control_flag: !!str requisite,required
  tags:
    - always

- name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
    tool'
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Collect the available authselect features'
  ansible.builtin.command:
    cmd: authselect list-features minimal
  register: result_authselect_available_features
  changed_when: false
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Enable pam_pwhistory.so using authselect
    feature'
  block:

  - name: 'Limit Password Reuse: password-auth - Check integrity of authselect current
      profile'
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    ignore_errors: true

  - name: 'Limit Password Reuse: password-auth - Informative message based on the
      authselect integrity check result'
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd is success
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: 'Limit Password Reuse: password-auth - Get authselect current features'
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: 'Limit Password Reuse: password-auth - Ensure "with-pwhistory" feature is
      enabled using authselect tool'
    ansible.builtin.command:
      cmd: authselect enable-feature with-pwhistory
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-pwhistory")

  - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  - result_authselect_available_features.stdout is search("with-pwhistory")
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Enable pam_pwhistory.so in appropriate
    PAM files'
  block:

  - name: 'Limit Password Reuse: password-auth - Define the PAM file to be edited
      as a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/password-auth

  - name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: password-auth - Ensure authselect custom profile
      is used if authselect is present'
    block:

    - name: 'Limit Password Reuse: password-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: 'Limit Password Reuse: password-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd is success
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: password-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: password-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: password-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Get authselect current features
        to also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Restore the authselect features
        in the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: password-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: password-auth - Check if expected PAM module line
      is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ var_password_pam_remember_control_flag.split(",")[0]
        }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: password-auth - Include or update the PAM module
      line in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: password-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: password-auth - Ensure the correct control for
        the required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1{{ var_password_pam_remember_control_flag.split(",")[0] }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: password-auth - Ensure the required PAM module
        line is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        insertafter: ^password.*requisite.*pam_pwquality\.so
        line: password    {{ var_password_pam_remember_control_flag.split(",")[0]
          }}    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when: |
        result_authselect_present is defined and result_authselect_present.stat.exists and ((result_pam_module_add is defined and result_pam_module_add.changed) or (result_pam_module_edit is defined and result_pam_module_edit.changed))
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - |
    (result_authselect_available_features.stdout is defined and result_authselect_available_features.stdout is not search("with-pwhistory")) or result_authselect_available_features is not defined
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Check the presence of /etc/security/pwhistory.conf
    file'
  ansible.builtin.stat:
    path: /etc/security/pwhistory.conf
  register: result_pwhistory_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - pam_pwhistory.so parameters are configured
    in /etc/security/pwhistory.conf file'
  block:

  - name: 'Limit Password Reuse: password-auth - Ensure the pam_pwhistory.so remember
      parameter in /etc/security/pwhistory.conf'
    ansible.builtin.lineinfile:
      path: /etc/security/pwhistory.conf
      regexp: ^\s*remember\s*=
      line: remember = {{ var_password_pam_remember }}
      state: present

  - name: 'Limit Password Reuse: password-auth - Ensure the pam_pwhistory.so remember
      parameter is removed from PAM files'
    block:

    - name: 'Limit Password Reuse: password-auth - Check if /etc/pam.d/password-auth
        file is present'
      ansible.builtin.stat:
        path: /etc/pam.d/password-auth
      register: result_pam_file_present

    - name: 'Limit Password Reuse: password-auth - Check the proper remediation for
        the system'
      block:

      - name: 'Limit Password Reuse: password-auth - Define the PAM file to be edited
          as a local fact'
        ansible.builtin.set_fact:
          pam_file_path: /etc/pam.d/password-auth

      - name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
          tool'
        ansible.builtin.stat:
          path: /usr/bin/authselect
        register: result_authselect_present

      - name: 'Limit Password Reuse: password-auth - Ensure authselect custom profile
          is used if authselect is present'
        block:

        - name: 'Limit Password Reuse: password-auth - Check integrity of authselect
            current profile'
          ansible.builtin.command:
            cmd: authselect check
          register: result_authselect_check_cmd
          changed_when: false
          ignore_errors: true

        - name: 'Limit Password Reuse: password-auth - Informative message based on
            the authselect integrity check result'
          ansible.builtin.assert:
            that:
            - result_authselect_check_cmd is success
            fail_msg:
            - authselect integrity check failed. Remediation aborted!
            - This remediation could not be applied because an authselect profile
              was not selected or the selected profile is not intact.
            - It is not recommended to manually edit the PAM files when authselect
              tool is available.
            - In cases where the default authselect profile does not cover a specific
              demand, a custom authselect profile is recommended.
            success_msg:
            - authselect integrity check passed

        - name: 'Limit Password Reuse: password-auth - Get authselect current profile'
          ansible.builtin.shell:
            cmd: authselect current -r | awk '{ print $1 }'
          register: result_authselect_profile
          changed_when: false
          when:
          - result_authselect_check_cmd is success

        - name: 'Limit Password Reuse: password-auth - Define the current authselect
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is match("custom/")

        - name: 'Limit Password Reuse: password-auth - Define the new authselect custom
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: custom/hardening
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is not match("custom/")

        - name: 'Limit Password Reuse: password-auth - Get authselect current features
            to also enable them in the custom profile'
          ansible.builtin.shell:
            cmd: authselect current | tail -n+3 | awk '{ print $2 }'
          register: result_authselect_features
          changed_when: false
          when:
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: password-auth - Check if any custom profile
            with the same name was already created'
          ansible.builtin.stat:
            path: /etc/authselect/{{ authselect_custom_profile }}
          register: result_authselect_custom_profile_present
          changed_when: false
          when:
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: password-auth - Create an authselect custom
            profile based on the current profile'
          ansible.builtin.command:
            cmd: authselect create-profile hardening -b {{ authselect_current_profile
              }}
          when:
          - result_authselect_check_cmd is success
          - authselect_current_profile is not match("custom/")
          - not result_authselect_custom_profile_present.stat.exists

        - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: password-auth - Ensure the authselect custom
            profile is selected'
          ansible.builtin.command:
            cmd: authselect select {{ authselect_custom_profile }}
          register: result_pam_authselect_select_profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: password-auth - Restore the authselect features
            in the custom profile'
          ansible.builtin.command:
            cmd: authselect enable-feature {{ item }}
          loop: '{{ result_authselect_features.stdout_lines }}'
          register: result_pam_authselect_restore_features
          when:
          - result_authselect_profile is not skipped
          - result_authselect_features is not skipped
          - result_pam_authselect_select_profile is not skipped

        - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - result_pam_authselect_restore_features is not skipped

        - name: 'Limit Password Reuse: password-auth - Change the PAM file to be edited
            according to the custom authselect profile'
          ansible.builtin.set_fact:
            pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
              | basename }}
        when:
        - result_authselect_present.stat.exists

      - name: 'Limit Password Reuse: password-auth - Ensure the "remember" option
          from "pam_pwhistory.so" is not present in {{ pam_file_path }}'
        ansible.builtin.replace:
          dest: '{{ pam_file_path }}'
          regexp: (.*password.*pam_pwhistory.so.*)\bremember\b=?[0-9a-zA-Z]*(.*)
          replace: \1\2
        register: result_pam_option_removal

      - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are
          applied'
        ansible.builtin.command:
          cmd: authselect apply-changes -b
        when:
        - result_authselect_present.stat.exists
        - result_pam_option_removal is changed
      when:
      - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - pam_pwhistory.so parameters are configured
    in PAM files'
  block:

  - name: 'Limit Password Reuse: password-auth - Define the PAM file to be edited
      as a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/password-auth

  - name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: password-auth - Ensure authselect custom profile
      is used if authselect is present'
    block:

    - name: 'Limit Password Reuse: password-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: 'Limit Password Reuse: password-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd is success
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: password-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: password-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: password-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Get authselect current features
        to also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Restore the authselect features
        in the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: password-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: password-auth - Check if expected PAM module line
      is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: password-auth - Include or update the PAM module
      line in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: password-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: password-auth - Ensure the correct control for
        the required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1requisite \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: password-auth - Ensure the required PAM module
        line is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    requisite    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when: |
        result_authselect_present is defined and result_authselect_present.stat.exists and ((result_pam_module_add is defined and result_pam_module_add.changed) or (result_pam_module_edit is defined and result_pam_module_edit.changed))
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: 'Limit Password Reuse: password-auth - Check if the required PAM module
      option is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_remember_option_present

  - name: 'Limit Password Reuse: password-auth - Ensure the "remember" PAM option
      for "pam_pwhistory.so" is included in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so.*)
      line: \1 remember={{ var_password_pam_remember }}
      state: present
    register: result_pam_remember_add
    when:
    - result_pam_module_remember_option_present.found == 0

  - name: 'Limit Password Reuse: password-auth - Ensure the required value for "remember"
      PAM option from "pam_pwhistory.so" in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember)=[0-9a-zA-Z]+\s*(.*)
      line: \1\2={{ var_password_pam_remember }} \3
    register: result_pam_remember_edit
    when:
    - result_pam_module_remember_option_present.found > 0

  - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - (result_pam_remember_add is defined and result_pam_remember_add.changed) or
      (result_pam_remember_edit is defined and result_pam_remember_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - not result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_remember='5'
var_password_pam_remember_control_flag='requisite,required'


var_password_pam_remember_control_flag="$(echo $var_password_pam_remember_control_flag | cut -d \, -f 1)"

if [ -f /usr/bin/authselect ]; then
    if authselect list-features minimal | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "$PAM_FILE_PATH"
                else
                    echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else
    if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "/etc/pam.d/system-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/system-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "/etc/pam.d/system-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/system-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "/etc/pam.d/system-auth"
            else
                echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "/etc/pam.d/system-auth"
            fi
        fi
    fi
fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/system-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/system-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP '^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks 's/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/system-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "$PAM_FILE_PATH"
        else
            echo 'password    '"requisite"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*\sremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks '/\s*password\s+'"requisite"'\s+pam_pwhistory.so.*/ s/$/ remember='"$var_password_pam_remember"'/' "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks 's/(\s*password\s+'"requisite"'\s+pam_pwhistory.so\s+.*)('"remember"'=)[[:alnum:]]+\s*(.*)/\1\2'"$var_password_pam_remember"' \3/' "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_remember # promote to variable
  set_fact:
    var_password_pam_remember: !!str 5
  tags:
    - always
- name: XCCDF Value var_password_pam_remember_control_flag # promote to variable
  set_fact:
    var_password_pam_remember_control_flag: !!str requisite,required
  tags:
    - always

- name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
    tool'
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Collect the available authselect features'
  ansible.builtin.command:
    cmd: authselect list-features minimal
  register: result_authselect_available_features
  changed_when: false
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Enable pam_pwhistory.so using authselect
    feature'
  block:

  - name: 'Limit Password Reuse: system-auth - Check integrity of authselect current
      profile'
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    ignore_errors: true

  - name: 'Limit Password Reuse: system-auth - Informative message based on the authselect
      integrity check result'
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd is success
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: 'Limit Password Reuse: system-auth - Get authselect current features'
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: 'Limit Password Reuse: system-auth - Ensure "with-pwhistory" feature is
      enabled using authselect tool'
    ansible.builtin.command:
      cmd: authselect enable-feature with-pwhistory
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-pwhistory")

  - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  - result_authselect_available_features.stdout is search("with-pwhistory")
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Enable pam_pwhistory.so in appropriate
    PAM files'
  block:

  - name: 'Limit Password Reuse: system-auth - Define the PAM file to be edited as
      a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: system-auth - Ensure authselect custom profile is
      used if authselect is present'
    block:

    - name: 'Limit Password Reuse: system-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: 'Limit Password Reuse: system-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd is success
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: system-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: system-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: system-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Get authselect current features to
        also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Restore the authselect features in
        the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: system-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: system-auth - Check if expected PAM module line is
      present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ var_password_pam_remember_control_flag.split(",")[0]
        }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: system-auth - Include or update the PAM module line
      in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: system-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: system-auth - Ensure the correct control for the
        required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1{{ var_password_pam_remember_control_flag.split(",")[0] }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: system-auth - Ensure the required PAM module line
        is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        insertafter: ^password.*requisite.*pam_pwquality\.so
        line: password    {{ var_password_pam_remember_control_flag.split(",")[0]
          }}    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when: |
        result_authselect_present is defined and result_authselect_present.stat.exists and ((result_pam_module_add is defined and result_pam_module_add.changed) or (result_pam_module_edit is defined and result_pam_module_edit.changed))
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - |
    (result_authselect_available_features.stdout is defined and result_authselect_available_features.stdout is not search("with-pwhistory")) or result_authselect_available_features is not defined
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Check the presence of /etc/security/pwhistory.conf
    file'
  ansible.builtin.stat:
    path: /etc/security/pwhistory.conf
  register: result_pwhistory_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - pam_pwhistory.so parameters are configured
    in /etc/security/pwhistory.conf file'
  block:

  - name: 'Limit Password Reuse: system-auth - Ensure the pam_pwhistory.so remember
      parameter in /etc/security/pwhistory.conf'
    ansible.builtin.lineinfile:
      path: /etc/security/pwhistory.conf
      regexp: ^\s*remember\s*=
      line: remember = {{ var_password_pam_remember }}
      state: present

  - name: 'Limit Password Reuse: system-auth - Ensure the pam_pwhistory.so remember
      parameter is removed from PAM files'
    block:

    - name: 'Limit Password Reuse: system-auth - Check if /etc/pam.d/system-auth file
        is present'
      ansible.builtin.stat:
        path: /etc/pam.d/system-auth
      register: result_pam_file_present

    - name: 'Limit Password Reuse: system-auth - Check the proper remediation for
        the system'
      block:

      - name: 'Limit Password Reuse: system-auth - Define the PAM file to be edited
          as a local fact'
        ansible.builtin.set_fact:
          pam_file_path: /etc/pam.d/system-auth

      - name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
          tool'
        ansible.builtin.stat:
          path: /usr/bin/authselect
        register: result_authselect_present

      - name: 'Limit Password Reuse: system-auth - Ensure authselect custom profile
          is used if authselect is present'
        block:

        - name: 'Limit Password Reuse: system-auth - Check integrity of authselect
            current profile'
          ansible.builtin.command:
            cmd: authselect check
          register: result_authselect_check_cmd
          changed_when: false
          ignore_errors: true

        - name: 'Limit Password Reuse: system-auth - Informative message based on
            the authselect integrity check result'
          ansible.builtin.assert:
            that:
            - result_authselect_check_cmd is success
            fail_msg:
            - authselect integrity check failed. Remediation aborted!
            - This remediation could not be applied because an authselect profile
              was not selected or the selected profile is not intact.
            - It is not recommended to manually edit the PAM files when authselect
              tool is available.
            - In cases where the default authselect profile does not cover a specific
              demand, a custom authselect profile is recommended.
            success_msg:
            - authselect integrity check passed

        - name: 'Limit Password Reuse: system-auth - Get authselect current profile'
          ansible.builtin.shell:
            cmd: authselect current -r | awk '{ print $1 }'
          register: result_authselect_profile
          changed_when: false
          when:
          - result_authselect_check_cmd is success

        - name: 'Limit Password Reuse: system-auth - Define the current authselect
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is match("custom/")

        - name: 'Limit Password Reuse: system-auth - Define the new authselect custom
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: custom/hardening
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is not match("custom/")

        - name: 'Limit Password Reuse: system-auth - Get authselect current features
            to also enable them in the custom profile'
          ansible.builtin.shell:
            cmd: authselect current | tail -n+3 | awk '{ print $2 }'
          register: result_authselect_features
          changed_when: false
          when:
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: system-auth - Check if any custom profile with
            the same name was already created'
          ansible.builtin.stat:
            path: /etc/authselect/{{ authselect_custom_profile }}
          register: result_authselect_custom_profile_present
          changed_when: false
          when:
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: system-auth - Create an authselect custom profile
            based on the current profile'
          ansible.builtin.command:
            cmd: authselect create-profile hardening -b {{ authselect_current_profile
              }}
          when:
          - result_authselect_check_cmd is success
          - authselect_current_profile is not match("custom/")
          - not result_authselect_custom_profile_present.stat.exists

        - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: system-auth - Ensure the authselect custom
            profile is selected'
          ansible.builtin.command:
            cmd: authselect select {{ authselect_custom_profile }}
          register: result_pam_authselect_select_profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: system-auth - Restore the authselect features
            in the custom profile'
          ansible.builtin.command:
            cmd: authselect enable-feature {{ item }}
          loop: '{{ result_authselect_features.stdout_lines }}'
          register: result_pam_authselect_restore_features
          when:
          - result_authselect_profile is not skipped
          - result_authselect_features is not skipped
          - result_pam_authselect_select_profile is not skipped

        - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - result_pam_authselect_restore_features is not skipped

        - name: 'Limit Password Reuse: system-auth - Change the PAM file to be edited
            according to the custom authselect profile'
          ansible.builtin.set_fact:
            pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
              | basename }}
        when:
        - result_authselect_present.stat.exists

      - name: 'Limit Password Reuse: system-auth - Ensure the "remember" option from
          "pam_pwhistory.so" is not present in {{ pam_file_path }}'
        ansible.builtin.replace:
          dest: '{{ pam_file_path }}'
          regexp: (.*password.*pam_pwhistory.so.*)\bremember\b=?[0-9a-zA-Z]*(.*)
          replace: \1\2
        register: result_pam_option_removal

      - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
        ansible.builtin.command:
          cmd: authselect apply-changes -b
        when:
        - result_authselect_present.stat.exists
        - result_pam_option_removal is changed
      when:
      - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - pam_pwhistory.so parameters are configured
    in PAM files'
  block:

  - name: 'Limit Password Reuse: system-auth - Define the PAM file to be edited as
      a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: system-auth - Ensure authselect custom profile is
      used if authselect is present'
    block:

    - name: 'Limit Password Reuse: system-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: 'Limit Password Reuse: system-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd is success
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: system-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: system-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: system-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Get authselect current features to
        also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Restore the authselect features in
        the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: system-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: system-auth - Check if expected PAM module line is
      present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: system-auth - Include or update the PAM module line
      in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: system-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: system-auth - Ensure the correct control for the
        required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1requisite \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: system-auth - Ensure the required PAM module line
        is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    requisite    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when: |
        result_authselect_present is defined and result_authselect_present.stat.exists and ((result_pam_module_add is defined and result_pam_module_add.changed) or (result_pam_module_edit is defined and result_pam_module_edit.changed))
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: 'Limit Password Reuse: system-auth - Check if the required PAM module option
      is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_remember_option_present

  - name: 'Limit Password Reuse: system-auth - Ensure the "remember" PAM option for
      "pam_pwhistory.so" is included in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so.*)
      line: \1 remember={{ var_password_pam_remember }}
      state: present
    register: result_pam_remember_add
    when:
    - result_pam_module_remember_option_present.found == 0

  - name: 'Limit Password Reuse: system-auth - Ensure the required value for "remember"
      PAM option from "pam_pwhistory.so" in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember)=[0-9a-zA-Z]+\s*(.*)
      line: \1\2={{ var_password_pam_remember }} \3
    register: result_pam_remember_edit
    when:
    - result_pam_module_remember_option_present.found > 0

  - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - (result_pam_remember_add is defined and result_pam_remember_add.changed) or
      (result_pam_remember_edit is defined and result_pam_remember_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - not result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_retry='3'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^retry")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_retry"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^retry\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^retry\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    cce="CCE-83569-4"
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi
	
		if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP '^\s*password\s+'".*"'\s+pam_pwquality.so\s.*\bretry\b' "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks 's/(.*password.*'".*"'.*pam_pwquality.so.*)\sretry=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi
	
		if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP '^\s*password\s+'".*"'\s+pam_pwquality.so\s.*\bretry\b' "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks 's/(.*password.*'".*"'.*pam_pwquality.so.*)\sretry=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83569-4
  - CJIS-5.5.3
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_retry # promote to variable
  set_fact:
    var_password_pam_retry: !!str 3
  tags:
    - always

- name: Ensure PAM variable retry is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^\s*retry
    line: retry = {{ var_password_pam_retry }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83569-4
  - CJIS-5.5.3
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted
    Per-Session - Check if /etc/pam.d/password-auth file is present
  ansible.builtin.stat:
    path: /etc/pam.d/password-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83569-4
  - CJIS-5.5.3
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted
    Per-Session - Check the proper remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/password-auth

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure authselect custom profile is used if authselect
      is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Informative message based on the authselect integrity
        check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd is success
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Define the new authselect custom profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Get authselect current features to also enable them
        in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Check if any custom profile with the same name was
        already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Create an authselect custom profile based on the current
        profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Change the PAM file to be edited according to the
        custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure the "retry" option from "pam_pwquality.so" is
      not present in {{ pam_file_path }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*.*.*pam_pwquality.so.*)\bretry\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CCE-83569-4
  - CJIS-5.5.3
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted
    Per-Session - Check if /etc/pam.d/system-auth file is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83569-4
  - CJIS-5.5.3
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted
    Per-Session - Check the proper remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure authselect custom profile is used if authselect
      is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Informative message based on the authselect integrity
        check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd is success
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Define the new authselect custom profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Get authselect current features to also enable them
        in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Check if any custom profile with the same name was
        already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Create an authselect custom profile based on the current
        profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Change the PAM file to be edited according to the
        custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure the "retry" option from "pam_pwquality.so" is
      not present in {{ pam_file_path }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*.*.*pam_pwquality.so.*)\bretry\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CCE-83569-4
  - CJIS-5.5.3
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

var_accounts_maximum_age_login_defs='365'


while IFS= read -r i; do
    chage -M $var_accounts_maximum_age_login_defs $i
done <   <(awk -v var="$var_accounts_maximum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($5 > var || $5 == "")) {print $1}' /etc/shadow)

- name: XCCDF Value var_accounts_maximum_age_login_defs # promote to variable
  set_fact:
    var_accounts_maximum_age_login_defs: !!str 365
  tags:
    - always

- name: Collect users with not correct maximum time period between password changes
  ansible.builtin.command:
    cmd: awk -F':' '(/^[^:]+:[^!*]/ && ($5 > {{ var_accounts_maximum_age_login_defs
      }} || $5 == "")) {print $1}' /etc/shadow
  register: user_names
  tags:
  - CCE-86031-2
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_max_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Change the maximum time period between password changes
  ansible.builtin.user:
    user: '{{ item }}'
    password_expire_max: '{{ var_accounts_maximum_age_login_defs }}'
  with_items: '{{ user_names.stdout_lines }}'
  when: user_names.stdout_lines | length > 0
  tags:
  - CCE-86031-2
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_max_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

var_accounts_minimum_age_login_defs='1'


while IFS= read -r i; do
    chage -m $var_accounts_minimum_age_login_defs $i
done <   <(awk -v var="$var_accounts_minimum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($4 < var || $4 == "")) {print $1}' /etc/shadow)

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow-utils; then

var_accounts_password_warn_age_login_defs='7'


grep -q ^PASS_WARN_AGE /etc/login.defs && \
sed -i "s/PASS_WARN_AGE.*/PASS_WARN_AGE\t$var_accounts_password_warn_age_login_defs/g" /etc/login.defs
if ! [ $? -eq 0 ]
then
  echo -e "PASS_WARN_AGE\t$var_accounts_password_warn_age_login_defs" >> /etc/login.defs
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83609-8
  - NIST-800-171-3.5.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.3.9
  - accounts_password_warn_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_password_warn_age_login_defs # promote to variable
  set_fact:
    var_accounts_password_warn_age_login_defs: !!str 7
  tags:
    - always

- name: Set Password Warning Age
  lineinfile:
    dest: /etc/login.defs
    regexp: ^PASS_WARN_AGE *[0-9]*
    state: present
    line: PASS_WARN_AGE        {{ var_accounts_password_warn_age_login_defs }}
    create: true
  when: '"shadow-utils" in ansible_facts.packages'
  tags:
  - CCE-83609-8
  - NIST-800-171-3.5.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.3.9
  - accounts_password_warn_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_deny='3'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*deny\s*="
    line="deny = $var_accounts_passwords_pam_faillock_deny"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(deny\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_deny"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bdeny\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bdeny\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*deny' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Check if system relies on authselect
    tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    ignore_errors: true

  - name: Lock Accounts After Failed Password Attempts - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd is success
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Lock Accounts After Failed Password Attempts - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Lock Accounts After Failed Password Attempts - Ensure "with-faillock" feature
      is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so preauth
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so authfail
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so account
      section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_deny # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_deny: !!str 3
  tags:
    - always

- name: Lock Accounts After Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*deny\s*=
    line: deny = {{ var_accounts_passwords_pam_faillock_deny }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter not in PAM files
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Lock Accounts After Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Lock Accounts After Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Lock Accounts After Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        ignore_errors: true

      - name: Lock Accounts After Failed Password Attempts - Informative message based
          on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd is success
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts After Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Check if any custom profile
          with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts After Failed Password Attempts - Change the PAM file to
          be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts After Failed Password Attempts - Ensure the "deny" option
        from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdeny\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Lock Accounts After Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Lock Accounts After Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Lock Accounts After Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Lock Accounts After Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        ignore_errors: true

      - name: Lock Accounts After Failed Password Attempts - Informative message based
          on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd is success
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts After Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Check if any custom profile
          with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts After Failed Password Attempts - Change the PAM file to
          be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts After Failed Password Attempts - Ensure the "deny" option
        from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdeny\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in PAM files
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
      deny parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*deny
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_deny_parameter_is_present

  - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of pam_faillock.so
      preauth deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found == 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of pam_faillock.so
      authfail deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found == 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
      for pam_faillock.so preauth deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(deny)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found > 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
      for pam_faillock.so authfail deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(deny)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_unlock_time='900'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*unlock_time\s*="
    line="unlock_time = $var_accounts_passwords_pam_faillock_unlock_time"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(unlock_time\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_unlock_time"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bunlock_time\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bunlock_time\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*unlock_time' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Check if system relies on
    authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    ignore_errors: true

  - name: Set Lockout Time for Failed Password Attempts - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd is success
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Set Lockout Time for Failed Password Attempts - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Set Lockout Time for Failed Password Attempts - Ensure "with-faillock" feature
      is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so preauth
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so authfail
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so account
      section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: !!str 900
  tags:
    - always

- name: Set Lockout Time for Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*unlock_time\s*=
    line: unlock_time = {{ var_accounts_passwords_pam_faillock_unlock_time }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter not in PAM files
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Set Lockout Time for Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Lockout Time for Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Set Lockout Time for Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        ignore_errors: true

      - name: Set Lockout Time for Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd is success
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Lockout Time for Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Change the PAM file
          to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Lockout Time for Failed Password Attempts - Ensure the "unlock_time"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bunlock_time\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Set Lockout Time for Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Set Lockout Time for Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Lockout Time for Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Set Lockout Time for Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        ignore_errors: true

      - name: Set Lockout Time for Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd is success
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Lockout Time for Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Change the PAM file
          to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Lockout Time for Failed Password Attempts - Ensure the "unlock_time"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bunlock_time\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in PAM files
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
      unlock_time parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*unlock_time
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_unlock_time_parameter_is_present

  - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
      pam_faillock.so preauth unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
      pam_faillock.so authfail unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
      for pam_faillock.so preauth unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(unlock_time)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found > 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
      for pam_faillock.so authfail unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(unlock_time)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Print error message if user is not root
  fail:
    msg: Root account required to read root $PATH
  when: ansible_env.USER != "root"
  ignore_errors: true
  tags:
  - CCE-83643-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - accounts_root_path_dirs_no_write
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Get root paths which are not symbolic links
  stat:
    path: '{{ item }}'
  changed_when: false
  failed_when: false
  register: root_paths
  with_items: '{{ ansible_env.PATH.split('':'') }}'
  when: ansible_env.USER == "root"
  tags:
  - CCE-83643-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - accounts_root_path_dirs_no_write
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable writability to root directories
  file:
    path: '{{ item.item }}'
    mode: g-w,o-w
  with_items: '{{ root_paths.results }}'
  when:
  - root_paths.results is defined
  - item.stat.exists
  - not item.stat.islnk
  tags:
  - CCE-83643-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - accounts_root_path_dirs_no_write
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_accounts_tmout='900'


# if 0, no occurence of tmout found, if 1, occurence found
tmout_found=0


for f in /etc/profile /etc/profile.d/*.sh; do

    if grep --silent '^[^#].*TMOUT' $f; then
        sed -i -E "s/^(.*)TMOUT\s*=\s*(\w|\$)*(.*)$/declare -xr TMOUT=$var_accounts_tmout\3/g" $f
        tmout_found=1
    fi
done

if [ $tmout_found -eq 0 ]; then
        echo -e "\n# Set TMOUT to $var_accounts_tmout per security requirements" >> /etc/profile.d/tmout.sh
        echo "declare -xr TMOUT=$var_accounts_tmout" >> /etc/profile.d/tmout.sh
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: XCCDF Value var_accounts_tmout # promote to variable
  set_fact:
    var_accounts_tmout: !!str 900
  tags:
    - always

- name: Correct any occurrence of TMOUT in /etc/profile
  replace:
    path: /etc/profile
    regexp: ^[^#].*TMOUT=.*
    replace: declare -xr TMOUT={{ var_accounts_tmout }}
  register: profile_replaced
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83633-8
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.6.1
  - accounts_tmout
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interactive Session Timeout
  lineinfile:
    path: /etc/profile.d/tmout.sh
    create: true
    regexp: TMOUT=
    line: declare -xr TMOUT={{ var_accounts_tmout }}
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83633-8
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.6.1
  - accounts_tmout
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

var_accounts_user_umask='027'






grep -q "^\s*umask" /etc/bashrc && \
  sed -i -E -e "s/^(\s*umask).*/\1 $var_accounts_user_umask/g" /etc/bashrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/bashrc
fi

- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if umask in /etc/bashrc is already set
  ansible.builtin.lineinfile:
    path: /etc/bashrc
    regexp: ^(\s*)umask\s+.*
    state: absent
  check_mode: true
  changed_when: false
  register: umask_replace
  tags:
  - CCE-83644-5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/bashrc
  ansible.builtin.replace:
    path: /etc/bashrc
    regexp: ^(\s*)umask(\s+).*
    replace: \g<1>umask\g<2>{{ var_accounts_user_umask }}
  when: umask_replace.found > 0
  tags:
  - CCE-83644-5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default umask is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/bashrc
    line: umask {{ var_accounts_user_umask }}
  when: umask_replace.found == 0
  tags:
  - CCE-83644-5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow-utils; then

var_accounts_user_umask='027'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/login.defs"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^UMASK")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_accounts_user_umask"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^UMASK\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^UMASK\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    # \n is precaution for case where file ends without trailing newline
    cce="CCE-83647-8"
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83647-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if UMASK is already set
  ansible.builtin.lineinfile:
    path: /etc/login.defs
    regexp: ^(\s*)UMASK\s+.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_umask_is_set
  when: '"shadow-utils" in ansible_facts.packages'
  tags:
  - CCE-83647-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user UMASK in /etc/login.defs
  ansible.builtin.replace:
    path: /etc/login.defs
    regexp: ^(\s*)UMASK(\s+).*
    replace: \g<1>UMASK\g<2>{{ var_accounts_user_umask }}
  when:
  - '"shadow-utils" in ansible_facts.packages'
  - result_umask_is_set.found > 0
  tags:
  - CCE-83647-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default UMASK is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/login.defs
    line: UMASK {{ var_accounts_user_umask }}
  when:
  - '"shadow-utils" in ansible_facts.packages'
  - result_umask_is_set.found == 0
  tags:
  - CCE-83647-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

var_accounts_user_umask='027'


grep -qE '^[^#]*umask' /etc/profile && \
  sed -i "s/umask.*/umask $var_accounts_user_umask/g" /etc/profile
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/profile
fi

- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if umask is already set
  ansible.builtin.lineinfile:
    path: /etc/profile
    regexp: (^[\s]*umask)\s+(\d+)
    state: absent
  check_mode: true
  changed_when: false
  register: result_umask_is_set
  tags:
  - CCE-90828-5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/profile
  ansible.builtin.replace:
    path: /etc/profile
    regexp: ^(\s*)umask\s+\d+
    replace: \1umask {{ var_accounts_user_umask }}
  tags:
  - CCE-90828-5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Append user umask in /etc/profile
  ansible.builtin.lineinfile:
    create: true
    path: /etc/profile
    line: umask {{ var_accounts_user_umask }}
  when: result_umask_is_set.found == 0
  tags:
  - CCE-90828-5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

readarray -t world_writable_files < <(find / -xdev -type f -perm -0002 2> /dev/null)
readarray -t interactive_home_dirs < <(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $6 }' /etc/passwd)

for world_writable in "${world_writable_files[@]}"; do
    for homedir in "${interactive_home_dirs[@]}"; do
        if grep -q -d skip "$world_writable" "$homedir"/.*; then
            chmod o-w $world_writable
            break
        fi
    done
done

for user in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $1}' /etc/passwd); do
    mkhomedir_helper $user 0077;
done

- name: Get all local users from /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - CCE-83639-5
  - accounts_user_interactive_home_directory_exists
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Create local_users variable from the getent output
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd|dict2items }}'
  tags:
  - CCE-83639-5
  - accounts_user_interactive_home_directory_exists
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure interactive users have a home directory exists
  ansible.builtin.user:
    name: '{{ item.key }}'
    create_home: true
  loop: '{{ local_users }}'
  when:
  - item.value[2]|int >= 1000
  - item.value[2]|int != 65534
  tags:
  - CCE-83639-5
  - accounts_user_interactive_home_directory_exists
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi

/usr/sbin/aide --init
/bin/cp -p /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Ensure AIDE is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83438-2
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database
  command: /usr/sbin/aide --init
  changed_when: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83438-2
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check whether the stock AIDE Database exists
  stat:
    path: /var/lib/aide/aide.db.new.gz
  register: aide_database_stat
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83438-2
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Stage AIDE Database
  copy:
    src: /var/lib/aide/aide.db.new.gz
    dest: /var/lib/aide/aide.db.gz
    backup: true
    remote_src: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (aide_database_stat.stat.exists is defined and aide_database_stat.stat.exists)
  tags:
  - CCE-83438-2
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy