Device help integration¶

If your target device can return a JSON description of its commands, termapy will include them and make them available in autocomplete and /help -- so the device feels integrated into the terminal.

How it works¶

1. You add a command to your firmware that returns a JSON object
2. You set device_json_cmd in your termapy config to the command name
3. On connect, termapy sends the command, parses the JSON, and registers the device commands for suggestions and help

The included commands are not REPL commands -- you type them as normal device commands. They just get autocomplete and show up in /help under the Target Device section.

This also means your device doesn't need its own help command or help display logic. The JSON response is a lightweight data dump -- termapy handles the formatting, searching, and display. One small JSON handler replaces a full help system on the device side.

JSON format¶

Your device command must return a JSON object with a commands key:

{"commands": {"AT+INFO": {"help": "Device information", "args": ""}, "AT+LED": {"help": "Control LED", "args": "<on|off>"}}}

Each command entry has:

• help (required) -- one-line description
• args (optional) -- argument spec, defaults to empty
• long_help (optional) -- multi-line prose shown in the DESCRIPTION section of /help <command>. Plain text, no markup.
• flags (optional) -- flag map, same shape as a plugin's Command.flags. Keys are canonical flag names (e.g. --table) with a description string value, or aliases (key = alias, value = canonical flag name).

A richer entry looks like this:

{
    "AT+LED": {
        "help": "Control LED",
        "args": "<on|off> {--blink}",
        "long_help": "Drive the on-board status LED.\n\nExamples:\n  AT+LED on          - solid on\n  AT+LED on --blink  - blink at 2 Hz",
        "flags": {
            "--blink": "Blink at 2 Hz instead of solid on.",
            "-b": "--blink"
        }
    }
}

/help AT+LED then renders NAME, SYNOPSIS, DESCRIPTION, and FLAGS in the same layout as a built-in plugin. /search also indexes these fields, so /search blink finds the device command by its flag description.

Only help is required -- entries with just help + args still work and render a short one-line form, so existing firmware that ships an older schema isn't affected.

The JSON can be a single line or pretty-printed. Termapy scans the response for the first { and parses from there, so preamble text (echo, status messages) before the JSON is fine.

Schema versioning¶

The top-level JSON may optionally carry a version string. This is the device's schema version -- not termapy's -- so firmware can signal when the command set changes and termapy should refresh its cache. Any string works (semver, date, build hash).

{
    "version": "1.4.0",
    "commands": { "...": {} }
}

On every include from the device, termapy compares the fetched version to the cached one:

• Strictly newer (PEP 440 compare, or string inequality for unparseable values) -> overwrite the cache.
• Equal, older, or missing on the new side -> keep the cache.
• No cache on disk -> always use the fetch (first-time case).

/include.reload bypasses the gate and always overwrites, so users who want to force a refresh still have a lever. The version is preserved through /include.dump so a dumped JSON is a valid drop-in for another device.

Config¶

Set device_json_cmd in your .cfg file:

{
    "device_json_cmd": "AT+HELP.JSON",
    "port": "$(env.MAIN_PORT|COM4)"
}

When this is set, /include runs automatically on connect. The result is cached to .target_menu.json in your config folder so subsequent connects load instantly without querying the device.

Commands¶

Implementing on your device¶

The simplest implementation: add a command that prints a JSON string to the serial port. For an AT command set, something like:

if (strcmp(cmd, "AT+HELP.JSON") == 0) {
    printf("{\"commands\":{");
    printf("\"AT+INFO\":{\"help\":\"Device info\",\"args\":\"\"},");
    printf("\"AT+TEMP\":{\"help\":\"Read temperature\",\"args\":\"\"},");
    printf("\"AT+LED\":{\"help\":\"Control LED\",\"args\":\"<on|off>\"}");
    printf("}}\r\n");
}

Or build it from your command table at runtime so it stays in sync.

The JSON format has a top-level commands key to allow future expansion (device options, protocol settings, etc.) without breaking existing implementations.

Demo¶

The demo device includes AT+HELP.JSON. Run the demo and type /help.target to see it in action, or /include.dump to see the raw JSON.