| | |
- enum.Enum(builtins.object)
-
- Register
-
- FineTuningFunctions
- IntelligentTerminalFunctions
- MainProfileParameters
- ModbusRegisters
- MonitoringFunctions
- MotorConstantsFunctions
- OtherParameters
- SecondMotorFunctions
- StandardFunctions
- enum.IntEnum(builtins.int, enum.Enum)
-
- Coil
- ExceptionCode
- FaultMonitorData
- FunctionCode
- InverterStatus
- TripFactor
class Coil(enum.IntEnum) |
| |
Coil(value, names=None, *, module=None, qualname=None, type=None, start=1)
Coil addresses (datasheet section B-4, p. 316).
|
| |
- Method resolution order:
- Coil
- enum.IntEnum
- builtins.int
- enum.Enum
- builtins.object
Data and other attributes defined here:
- Alarm = <Coil.Alarm: 0x18>
- AnalogCurrentIODisconnected = <Coil.AnalogCurrentIODisconnected: 0x2f>
- AnalogVoltageIODisconnected = <Coil.AnalogVoltageIODisconnected: 0x2e>
- BrakeError = <Coil.BrakeError: 0x27>
- BrakeRelease = <Coil.BrakeRelease: 0x26>
- CRCError = <Coil.CRCError: 0x4a>
- CapacitorLifeWarning = <Coil.CapacitorLifeWarning: 0x3a>
- CommunicationTrainDisconnection = <Coil.CommunicationTrainDisconnection: 0x33>
- ConstantSpeedReached = <Coil.ConstantSpeedReached: 0x14>
- CoolingFanSpeedDrop = <Coil.CoolingFanSpeedDrop: 0x3b>
- DataWritingInProgress = <Coil.DataWritingInProgress: 0x49>
- ExternalTrip = <Coil.ExternalTrip: 0x03>
- ForwardRotation = <Coil.ForwardRotation: 0x46>
- FramingError = <Coil.FramingError: 0x4c>
- FrequencyCommandSource = <Coil.FrequencyCommandSource: 0x54>
- GateSuppressMonitor = <Coil.GateSuppressMonitor: 0x58>
- GeneralOutput1 = <Coil.GeneralOutput1: 0x3f>
- GeneralOutput2 = <Coil.GeneralOutput2: 0x40>
- GeneralOutput3 = <Coil.GeneralOutput3: 0x41>
- HeatSinkOverheatWarning = <Coil.HeatSinkOverheatWarning: 0x3d>
- IntelligentInput1 = <Coil.IntelligentInput1: 0x07>
- IntelligentInput2 = <Coil.IntelligentInput2: 0x08>
- IntelligentInput3 = <Coil.IntelligentInput3: 0x09>
- IntelligentInput4 = <Coil.IntelligentInput4: 0x0a>
- IntelligentInput5 = <Coil.IntelligentInput5: 0x0b>
- IntelligentInput6 = <Coil.IntelligentInput6: 0x0c>
- IntelligentInput7 = <Coil.IntelligentInput7: 0x0d>
- InverterReady = <Coil.InverterReady: 0x11>
- InverterReadyOutput = <Coil.InverterReadyOutput: 0x45>
- LogicalOperationResult1 = <Coil.LogicalOperationResult1: 0x34>
- LogicalOperationResult2 = <Coil.LogicalOperationResult2: 0x35>
- LogicalOperationResult3 = <Coil.LogicalOperationResult3: 0x36>
- LowCurrentIndicator = <Coil.LowCurrentIndicator: 0x3e>
- MajorFailure = <Coil.MajorFailure: 0x48>
- OperationCommand = <Coil.OperationCommand: 0x01>
- OperationStatus = <Coil.OperationStatus: 0x0f>
- OperationTimeOver = <Coil.OperationTimeOver: 0x1e>
- OptionDisconnection = <Coil.OptionDisconnection: 0x53>
- OutputDeviation = <Coil.OutputDeviation: 0x17>
- OverTorque = <Coil.OverTorque: 0x1a>
- Overload = <Coil.Overload: 0x16>
- Overload2 = <Coil.Overload2: 0x2d>
- Overrun = <Coil.Overrun: 0x4b>
- PIDFeedbackComparison = <Coil.PIDFeedbackComparison: 0x32>
- ParityError = <Coil.ParityError: 0x4d>
- PlugInTimeOver = <Coil.PlugInTimeOver: 0x1f>
- PositioningCompleted = <Coil.PositioningCompleted: 0x2a>
- ReverseRotation = <Coil.ReverseRotation: 0x47>
- RotationDirectionCommand = <Coil.RotationDirectionCommand: 0x02>
- RotationDirectionStatus = <Coil.RotationDirectionStatus: 0x10>
- RunCommandSource = <Coil.RunCommandSource: 0x55>
- Running = <Coil.Running: 0x13>
- SecondMotorSelected = <Coil.SecondMotorSelected: 0x56>
- SetFrequencyOverreached = <Coil.SetFrequencyOverreached: 0x15>
- SetFrequencyOverreached2 = <Coil.SetFrequencyOverreached2: 0x2b>
- SetFrequencyReached = <Coil.SetFrequencyReached: 0x19>
- SetFrequencyReached2 = <Coil.SetFrequencyReached2: 0x2c>
- SpeedDeviationMaximum = <Coil.SpeedDeviationMaximum: 0x29>
- StartingContactSignal = <Coil.StartingContactSignal: 0x3c>
- SumCheckError = <Coil.SumCheckError: 0x4e>
- ThermalAlarm = <Coil.ThermalAlarm: 0x20>
- TorqueLimited = <Coil.TorqueLimited: 0x1d>
- TripReset = <Coil.TripReset: 0x04>
- UnderVoltage = <Coil.UnderVoltage: 0x1c>
- WindowComparatorCurrent = <Coil.WindowComparatorCurrent: 0x51>
- WindowComparatorVoltage = <Coil.WindowComparatorVoltage: 0x50>
- ZeroHzDetection = <Coil.ZeroHzDetection: 0x28>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class ExceptionCode(enum.IntEnum) |
| |
ExceptionCode(value, names=None, *, module=None, qualname=None, type=None, start=1)
Exception codes replied by inverter if an exception occurs
(datasheet section B-3, p. 300).
|
| |
- Method resolution order:
- ExceptionCode
- enum.IntEnum
- builtins.int
- enum.Enum
- builtins.object
Data and other attributes defined here:
- FunctionNotAvailable = <ExceptionCode.FunctionNotAvailable: 34>
- FunctionNotFound = <ExceptionCode.FunctionNotFound: 2>
- FunctionNotSupported = <ExceptionCode.FunctionNotSupported: 1>
- InvalidDataFormat = <ExceptionCode.InvalidDataFormat: 3>
- OutOfBounds = <ExceptionCode.OutOfBounds: 33>
- ReadOnlyTarget = <ExceptionCode.ReadOnlyTarget: 35>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class FaultMonitorData(enum.IntEnum) |
| |
FaultMonitorData(value, names=None, *, module=None, qualname=None, type=None, start=1)
Register offset for fault monitor data access. This is meant
to be used with fault monitor 1 to 6 commands (D081 - D086) as listed
in datasheet section B-4 pp. 319-320.
Use MonitoringFunctions.D08y + FaultMonitorData.xxx to access xxx of
fault monitor y.
|
| |
- Method resolution order:
- FaultMonitorData
- enum.IntEnum
- builtins.int
- enum.Enum
- builtins.object
Data and other attributes defined here:
- Current = <FaultMonitorData.Current: 4>
- Factor = <FaultMonitorData.Factor: 0>
- Frequency = <FaultMonitorData.Frequency: 2>
- InverterStatus = <FaultMonitorData.InverterStatus: 1>
- PowerOnTime = <FaultMonitorData.PowerOnTime: 8>
- RunningTime = <FaultMonitorData.RunningTime: 6>
- Voltage = <FaultMonitorData.Voltage: 5>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class FineTuningFunctions(Register) |
| |
FineTuningFunctions(value, names=None, *, module=None, qualname=None, type=None, start=1)
Fine tuning function group. See datasheet
sections 3-6 (pp. 121-153) and B-4 (pp. 328-331).
|
| |
- Method resolution order:
- FineTuningFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- ActiveFrequencyMatchingRestartLevel = <FineTuningFunctions.ActiveFrequencyMatchingRestartLevel: (0x131d, 1)>
- ActiveFrequencyMatchingRestartParameter = <FineTuningFunctions.ActiveFrequencyMatchingRestartParameter: (0x131e, 1)>
- AllowableMomentaryPowerInterruptionTime = <FineTuningFunctions.AllowableMomentaryPowerInterruptionTime: (0x1302, 1)>
- AmbientTemperature = <FineTuningFunctions.AmbientTemperature: (0x134e, 1)>
- AnalogCurrentLevelAtDisconnection = <FineTuningFunctions.AnalogCurrentLevelAtDisconnection: (0x134a, 1)>
- AnalogVoltageLevelAtDisconnection = <FineTuningFunctions.AnalogVoltageLevelAtDisconnection: (0x1349, 1)>
- AutoReturnInitialDisplay = <FineTuningFunctions.AutoReturnInitialDisplay: (0x13a7, 1)>
- AutomaticCarrierFrequencyReduction = <FineTuningFunctions.AutomaticCarrierFrequencyReduction: (0x135c, 1)>
- BRDResistor = <FineTuningFunctions.BRDResistor: (0x1364, 1)>
- BrakeControlSelection = <FineTuningFunctions.BrakeControlSelection: (0x137b, 1)>
- BrakeInputFrequency = <FineTuningFunctions.BrakeInputFrequency: (0x1382, 1)>
- BrakeReleaseCurrent = <FineTuningFunctions.BrakeReleaseCurrent: (0x1381, 1)>
- BrakeReleaseFrequency = <FineTuningFunctions.BrakeReleaseFrequency: (0x1380, 1)>
- BrakeWaitTimeForAcceleration = <FineTuningFunctions.BrakeWaitTimeForAcceleration: (0x137d, 1)>
- BrakeWaitTimeForConfirmation = <FineTuningFunctions.BrakeWaitTimeForConfirmation: (0x137f, 1)>
- BrakeWaitTimeForRelease = <FineTuningFunctions.BrakeWaitTimeForRelease: (0x137c, 1)>
- BrakeWaitTimeForStopping = <FineTuningFunctions.BrakeWaitTimeForStopping: (0x137e, 1)>
- CarrierFrequency = <FineTuningFunctions.CarrierFrequency: (0x1356, 1)>
- ClearElapsedTimeOfCoolingFan = <FineTuningFunctions.ClearElapsedTimeOfCoolingFan: (0x1360, 1)>
- CoolingFanControl = <FineTuningFunctions.CoolingFanControl: (0x135f, 1)>
- DataReadWriteSelection = <FineTuningFunctions.DataReadWriteSelection: (0x13a9, 1)>
- DecelerationStartingWidthOfNonStopFunction = <FineTuningFunctions.DecelerationStartingWidthOfNonStopFunction: (0x1339, 1)>
- DecelerationTimeOfNonStopFunction = <FineTuningFunctions.DecelerationTimeOfNonStopFunction: (0x1337, 2)>
- DisplayExternalOperatorConnected = <FineTuningFunctions.DisplayExternalOperatorConnected: (0x139a, 1)>
- DisplaySelection = <FineTuningFunctions.DisplaySelection: (0x1327, 1)>
- DualRateSelection = <FineTuningFunctions.DualRateSelection: (0x1333, 1)>
- ElectronicThermalCharacteristicsSelection = <FineTuningFunctions.ElectronicThermalCharacteristicsSelection: (0x130e, 1)>
- ElectronicThermalCurrent1 = <FineTuningFunctions.ElectronicThermalCurrent1: (0x1311, 1)>
- ElectronicThermalCurrent2 = <FineTuningFunctions.ElectronicThermalCurrent2: (0x1313, 1)>
- ElectronicThermalCurrent3 = <FineTuningFunctions.ElectronicThermalCurrent3: (0x1315, 1)>
- ElectronicThermalFrequency1 = <FineTuningFunctions.ElectronicThermalFrequency1: (0x1310, 1)>
- ElectronicThermalFrequency2 = <FineTuningFunctions.ElectronicThermalFrequency2: (0x1312, 1)>
- ElectronicThermalFrequency3 = <FineTuningFunctions.ElectronicThermalFrequency3: (0x1314, 1)>
- ElectronicThermalLevel = <FineTuningFunctions.ElectronicThermalLevel: (0x130d, 1)>
- ExternalOperatorDisconnectionAction = <FineTuningFunctions.ExternalOperatorDisconnectionAction: (0x13a8, 1)>
- FirstDualMonitorParameter = <FineTuningFunctions.FirstDualMonitorParameter: (0x13a3, 1)>
- FreeRunStopSelection = <FineTuningFunctions.FreeRunStopSelection: (0x135b, 1)>
- FreeVfFrequency1 = <FineTuningFunctions.FreeVfFrequency1: (0x1367, 1)>
- FreeVfFrequency2 = <FineTuningFunctions.FreeVfFrequency2: (0x1369, 1)>
- FreeVfFrequency3 = <FineTuningFunctions.FreeVfFrequency3: (0x136b, 1)>
- FreeVfFrequency4 = <FineTuningFunctions.FreeVfFrequency4: (0x136d, 1)>
- FreeVfFrequency5 = <FineTuningFunctions.FreeVfFrequency5: (0x136f, 1)>
- FreeVfFrequency6 = <FineTuningFunctions.FreeVfFrequency6: (0x1371, 1)>
- FreeVfFrequency7 = <FineTuningFunctions.FreeVfFrequency7: (0x1373, 1)>
- FreeVfVoltage1 = <FineTuningFunctions.FreeVfVoltage1: (0x1368, 1)>
- FreeVfVoltage2 = <FineTuningFunctions.FreeVfVoltage2: (0x136a, 1)>
- FreeVfVoltage3 = <FineTuningFunctions.FreeVfVoltage3: (0x136c, 1)>
- FreeVfVoltage4 = <FineTuningFunctions.FreeVfVoltage4: (0x136e, 1)>
- FreeVfVoltage5 = <FineTuningFunctions.FreeVfVoltage5: (0x1370, 1)>
- FreeVfVoltage6 = <FineTuningFunctions.FreeVfVoltage6: (0x1372, 1)>
- FreeVfVoltage7 = <FineTuningFunctions.FreeVfVoltage7: (0x1374, 1)>
- FrequencyConversionCoefficient = <FineTuningFunctions.FrequencyConversionCoefficient: (0x1359, 1)>
- FrequencyMatchingLowerLimit = <FineTuningFunctions.FrequencyMatchingLowerLimit: (0x1307, 2)>
- FrequencySetInMonitoring = <FineTuningFunctions.FrequencySetInMonitoring: (0x13a6, 1)>
- GSInputMode = <FineTuningFunctions.GSInputMode: (0x1394, 1)>
- InitialScreenSelection = <FineTuningFunctions.InitialScreenSelection: (0x1328, 1)>
- InitializationParameterSelection = <FineTuningFunctions.InitializationParameterSelection: (0x1358, 1)>
- InitializationSelection = <FineTuningFunctions.InitializationSelection: (0x1357, 1)>
- InitializationTargetData = <FineTuningFunctions.InitializationTargetData: (0x1361, 1)>
- InitializeTrigger = <FineTuningFunctions.InitializeTrigger: (0x13b7, 1)>
- IntegratedPowerClear = <FineTuningFunctions.IntegratedPowerClear: (0x1351, 1)>
- IntegratedPowerDisplayGain = <FineTuningFunctions.IntegratedPowerDisplayGain: (0x1352, 1)>
- InverterModeSelection = <FineTuningFunctions.InverterModeSelection: (0x13ae, 1)>
- MomentaryPowerInterruptionRetryTimeSelection = <FineTuningFunctions.MomentaryPowerInterruptionRetryTimeSelection: (0x1305, 1)>
- MotorCableLengthParameter = <FineTuningFunctions.MotorCableLengthParameter: (0x1322, 1)>
- NonStopFunctionOnPowerInterruptionSelection = <FineTuningFunctions.NonStopFunctionOnPowerInterruptionSelection: (0x1334, 1)>
- OvercurrentSuppressionFunction = <FineTuningFunctions.OvercurrentSuppressionFunction: (0x131c, 1)>
- OverloadLimitLevel = <FineTuningFunctions.OverloadLimitLevel: (0x1317, 1)>
- OverloadLimitLevel2 = <FineTuningFunctions.OverloadLimitLevel2: (0x131a, 1)>
- OverloadLimitParameter = <FineTuningFunctions.OverloadLimitParameter: (0x1318, 1)>
- OverloadLimitParameter2 = <FineTuningFunctions.OverloadLimitParameter2: (0x131b, 1)>
- OverloadLimitSelection = <FineTuningFunctions.OverloadLimitSelection: (0x1316, 1)>
- OverloadLimitSelection2 = <FineTuningFunctions.OverloadLimitSelection2: (0x1319, 1)>
- OvervoltageProtectionDuringDeceleration = <FineTuningFunctions.OvervoltageProtectionDuringDeceleration: (0x1385, 1)>
- OvervoltageProtectionIntegralGain = <FineTuningFunctions.OvervoltageProtectionIntegralGain: (0x1389, 1)>
- OvervoltageProtectionLevelDuringDeceleration = <FineTuningFunctions.OvervoltageProtectionLevelDuringDeceleration: (0x1386, 1)>
- OvervoltageProtectionParameter = <FineTuningFunctions.OvervoltageProtectionParameter: (0x1387, 1)>
- OvervoltageProtectionProportionalGain = <FineTuningFunctions.OvervoltageProtectionProportionalGain: (0x1388, 1)>
- OvervoltageRetryTimeSelection = <FineTuningFunctions.OvervoltageRetryTimeSelection: (0x130b, 1)>
- PowerOnTimeSetting = <FineTuningFunctions.PowerOnTimeSetting: (0x1323, 2)>
- RateOfRegenerativeBrakingFunction = <FineTuningFunctions.RateOfRegenerativeBrakingFunction: (0x135d, 1)>
- ReducedVoltageStartupSelection = <FineTuningFunctions.ReducedVoltageStartupSelection: (0x1326, 1)>
- RegenerativeBrakingONLevel = <FineTuningFunctions.RegenerativeBrakingONLevel: (0x1363, 1)>
- RegenerativeBrakingOperation = <FineTuningFunctions.RegenerativeBrakingOperation: (0x1362, 1)>
- RetrySelection = <FineTuningFunctions.RetrySelection: (0x1301, 1)>
- RetryWaitTime = <FineTuningFunctions.RetryWaitTime: (0x1303, 1)>
- ReverseRotationPreventionSelection = <FineTuningFunctions.ReverseRotationPreventionSelection: (0x1330, 1)>
- RotationDirectionLimitSelection = <FineTuningFunctions.RotationDirectionLimitSelection: (0x1325, 1)>
- SecondDualMonitorParameter = <FineTuningFunctions.SecondDualMonitorParameter: (0x13a4, 1)>
- SoftLockSelection = <FineTuningFunctions.SoftLockSelection: (0x1320, 1)>
- StartingFrequency = <FineTuningFunctions.StartingFrequency: (0x1355, 1)>
- StartingFrequencyAtActiveFrequencyMatchingRestart = <FineTuningFunctions.StartingFrequencyAtActiveFrequencyMatchingRestart: (0x131f, 1)>
- StartingVoltageOfNonStopFunction = <FineTuningFunctions.StartingVoltageOfNonStopFunction: (0x1335, 1)>
- StopDecelerationLevelOfNonStopFunction = <FineTuningFunctions.StopDecelerationLevelOfNonStopFunction: (0x1336, 1)>
- StopKeySelection = <FineTuningFunctions.StopKeySelection: (0x135a, 1)>
- StopSelection = <FineTuningFunctions.StopSelection: (0x135e, 1)>
- ThermalAccumulatorGain = <FineTuningFunctions.ThermalAccumulatorGain: (0x13cb, 1)>
- ThermalDecrementMode = <FineTuningFunctions.ThermalDecrementMode: (0x13c6, 1)>
- ThermalDecrementTime = <FineTuningFunctions.ThermalDecrementTime: (0x13c7, 2)>
- ThermalDecrementTimeConstant = <FineTuningFunctions.ThermalDecrementTimeConstant: (0x13c9, 2)>
- TorqueLADSTOPSelection = <FineTuningFunctions.TorqueLADSTOPSelection: (0x132f, 1)>
- TorqueLimit1 = <FineTuningFunctions.TorqueLimit1: (0x132b, 1)>
- TorqueLimit2 = <FineTuningFunctions.TorqueLimit2: (0x132c, 1)>
- TorqueLimit3 = <FineTuningFunctions.TorqueLimit3: (0x132d, 1)>
- TorqueLimit4 = <FineTuningFunctions.TorqueLimit4: (0x132e, 1)>
- TorqueLimitSelection = <FineTuningFunctions.TorqueLimitSelection: (0x132a, 1)>
- TripRetrySelection = <FineTuningFunctions.TripRetrySelection: (0x1309, 1)>
- TripRetryWaitTime = <FineTuningFunctions.TripRetryWaitTime: (0x130c, 1)>
- UndervoltageTripDuringStopSelection = <FineTuningFunctions.UndervoltageTripDuringStopSelection: (0x1304, 1)>
- UserParameterAutomaticSettingFunctionSelection = <FineTuningFunctions.UserParameterAutomaticSettingFunctionSelection: (0x1329, 1)>
- WindowComparatorCurrentHysteresisWidth = <FineTuningFunctions.WindowComparatorCurrentHysteresisWidth: (0x1344, 1)>
- WindowComparatorLowerCurrentLevel = <FineTuningFunctions.WindowComparatorLowerCurrentLevel: (0x1343, 1)>
- WindowComparatorLowerVoltageLevel = <FineTuningFunctions.WindowComparatorLowerVoltageLevel: (0x1340, 1)>
- WindowComparatorUpperCurrentLevel = <FineTuningFunctions.WindowComparatorUpperCurrentLevel: (0x1342, 1)>
- WindowComparatorUpperVoltageLevel = <FineTuningFunctions.WindowComparatorUpperVoltageLevel: (0x133f, 1)>
- WindowComparatorVoltageHysteresisWidth = <FineTuningFunctions.WindowComparatorVoltageHysteresisWidth: (0x1341, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class FunctionCode(enum.IntEnum) |
| |
FunctionCode(value, names=None, *, module=None, qualname=None, type=None, start=1)
Function codes (2nd byte of Modbus message).
See datasheet section B-3, p. 299.
|
| |
- Method resolution order:
- FunctionCode
- enum.IntEnum
- builtins.int
- enum.Enum
- builtins.object
Data and other attributes defined here:
- LoopbackTest = <FunctionCode.LoopbackTest: 8>
- ReadCoilStatus = <FunctionCode.ReadCoilStatus: 1>
- ReadHoldingRegister = <FunctionCode.ReadHoldingRegister: 3>
- ReadWriteRegisters = <FunctionCode.ReadWriteRegisters: 23>
- WriteInCoil = <FunctionCode.WriteInCoil: 5>
- WriteInHoldingRegister = <FunctionCode.WriteInHoldingRegister: 6>
- WriteInMultipleCoils = <FunctionCode.WriteInMultipleCoils: 15>
- WriteInRegisters = <FunctionCode.WriteInRegisters: 16>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
GroupA = class StandardFunctions(Register) |
| |
GroupA(value, names=None, *, module=None, qualname=None, type=None, start=1)
Standard function group. See datasheet
sections 3-5 (pp. 90-120) and B-4 (pp. 324-327).
|
| |
- Method resolution order:
- StandardFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AVRDecelerationGain = <StandardFunctions.AVRDecelerationGain: (0x126c, 1)>
- AVRFilterTimeConstant = <StandardFunctions.AVRFilterTimeConstant: (0x126b, 1)>
- AVRSelection = <StandardFunctions.AVRSelection: (0x1269, 1)>
- AVRVoltageSelection = <StandardFunctions.AVRVoltageSelection: (0x126a, 1)>
- Acc1ToAcc2FrequencyTransitionPoint = <StandardFunctions.Acc1ToAcc2FrequencyTransitionPoint: (0x1279, 2)>
- AccelerationCurveParameter = <StandardFunctions.AccelerationCurveParameter: (0x12a5, 1)>
- AccelerationCurveSelection = <StandardFunctions.AccelerationCurveSelection: (0x127d, 1)>
- AccelerationStopFrequency = <StandardFunctions.AccelerationStopFrequency: (0x125c, 2)>
- AccelerationStopTime = <StandardFunctions.AccelerationStopTime: (0x125e, 1)>
- AccelerationTime2 = <StandardFunctions.AccelerationTime2: (0x1274, 2)>
- AutomaticTorqueBoostSlipCompensationGain = <StandardFunctions.AutomaticTorqueBoostSlipCompensationGain: (0x1241, 1)>
- AutomaticTorqueBoostVoltageCompensationGain = <StandardFunctions.AutomaticTorqueBoostVoltageCompensationGain: (0x1240, 1)>
- BaseFrequency = <StandardFunctions.BaseFrequency: (0x1203, 1)>
- CurrentInputActiveRangeEndFrequency = <StandardFunctions.CurrentInputActiveRangeEndFrequency: (0x1283, 2)>
- CurrentInputActiveRangeEndRatio = <StandardFunctions.CurrentInputActiveRangeEndRatio: (0x1286, 1)>
- CurrentInputActiveRangeStartFrequency = <StandardFunctions.CurrentInputActiveRangeStartFrequency: (0x1281, 2)>
- CurrentInputActiveRangeStartRatio = <StandardFunctions.CurrentInputActiveRangeStartRatio: (0x1285, 1)>
- CurrentInputStartFrequencyEnable = <StandardFunctions.CurrentInputStartFrequencyEnable: (0x1287, 1)>
- DCInjectionBrakingCarrierFrequency = <StandardFunctions.DCInjectionBrakingCarrierFrequency: (0x124d, 1)>
- DCInjectionBrakingDelayTime = <StandardFunctions.DCInjectionBrakingDelayTime: (0x1247, 1)>
- DCInjectionBrakingEnable = <StandardFunctions.DCInjectionBrakingEnable: (0x1245, 1)>
- DCInjectionBrakingFrequency = <StandardFunctions.DCInjectionBrakingFrequency: (0x1246, 1)>
- DCInjectionBrakingMethodSelection = <StandardFunctions.DCInjectionBrakingMethodSelection: (0x124a, 1)>
- DCInjectionBrakingPower = <StandardFunctions.DCInjectionBrakingPower: (0x1248, 1)>
- DCInjectionBrakingTime = <StandardFunctions.DCInjectionBrakingTime: (0x1249, 1)>
- Dec1ToDec2FrequencyTransitionPoint = <StandardFunctions.Dec1ToDec2FrequencyTransitionPoint: (0x127b, 2)>
- DecelerationCurveParameter = <StandardFunctions.DecelerationCurveParameter: (0x12a6, 1)>
- DecelerationCurveSelection = <StandardFunctions.DecelerationCurveSelection: (0x127e, 1)>
- DecelerationHoldFrequency = <StandardFunctions.DecelerationHoldFrequency: (0x12bd, 2)>
- DecelerationHoldTime = <StandardFunctions.DecelerationHoldTime: (0x12bf, 1)>
- DecelerationTime2 = <StandardFunctions.DecelerationTime2: (0x1276, 2)>
- DriveProgramming = <StandardFunctions.DriveProgramming: (0x1213, 1)>
- ELSCurveRatio1DuringAcceleration = <StandardFunctions.ELSCurveRatio1DuringAcceleration: (0x12b9, 1)>
- ELSCurveRatio1DuringDeceleration = <StandardFunctions.ELSCurveRatio1DuringDeceleration: (0x12bb, 1)>
- ELSCurveRatio2DuringAcceleration = <StandardFunctions.ELSCurveRatio2DuringAcceleration: (0x12ba, 1)>
- ELSCurveRatio2DuringDeceleration = <StandardFunctions.ELSCurveRatio2DuringDeceleration: (0x12bc, 1)>
- EnergySavingOperationMode = <StandardFunctions.EnergySavingOperationMode: (0x126d, 1)>
- EnergySavingResponseAccuracyAdjustment = <StandardFunctions.EnergySavingResponseAccuracyAdjustment: (0x126e, 1)>
- ExternalFrequencyFilterTimeConstant = <StandardFunctions.ExternalFrequencyFilterTimeConstant: (0x1212, 1)>
- FrequencyAdditionAmount = <StandardFunctions.FrequencyAdditionAmount: (0x12b3, 2)>
- FrequencyAdditionDirection = <StandardFunctions.FrequencyAdditionDirection: (0x12b5, 1)>
- FrequencyLowerLimit = <StandardFunctions.FrequencyLowerLimit: (0x1251, 2)>
- FrequencyReferenceSelection = <StandardFunctions.FrequencyReferenceSelection: (0x1201, 1)>
- FrequencyUpperLimit = <StandardFunctions.FrequencyUpperLimit: (0x124f, 2)>
- IOVoltageCurrentSelection = <StandardFunctions.IOVoltageCurrentSelection: (0x1205, 1)>
- JoggingFrequency = <StandardFunctions.JoggingFrequency: (0x1238, 1)>
- JoggingStopSelection = <StandardFunctions.JoggingStopSelection: (0x1239, 1)>
- JumpFrequency1 = <StandardFunctions.JumpFrequency1: (0x1253, 2)>
- JumpFrequency2 = <StandardFunctions.JumpFrequency2: (0x1256, 2)>
- JumpFrequency3 = <StandardFunctions.JumpFrequency3: (0x1259, 2)>
- JumpFrequencyWidth1 = <StandardFunctions.JumpFrequencyWidth1: (0x1255, 1)>
- JumpFrequencyWidth2 = <StandardFunctions.JumpFrequencyWidth2: (0x1258, 1)>
- JumpFrequencyWidth3 = <StandardFunctions.JumpFrequencyWidth3: (0x125b, 1)>
- ManualTorqueBoostFrequency = <StandardFunctions.ManualTorqueBoostFrequency: (0x123d, 1)>
- ManualTorqueBoostVoltage = <StandardFunctions.ManualTorqueBoostVoltage: (0x123c, 1)>
- MaximumFrequency = <StandardFunctions.MaximumFrequency: (0x1204, 1)>
- MethodToSwitchToAcc2Dec2 = <StandardFunctions.MethodToSwitchToAcc2Dec2: (0x1278, 1)>
- MultiStepSpeedReference0 = <StandardFunctions.MultiStepSpeedReference0: (0x1216, 2)>
- MultiStepSpeedReference1 = <StandardFunctions.MultiStepSpeedReference1: (0x1218, 2)>
- MultiStepSpeedReference10 = <StandardFunctions.MultiStepSpeedReference10: (0x122a, 2)>
- MultiStepSpeedReference11 = <StandardFunctions.MultiStepSpeedReference11: (0x122c, 2)>
- MultiStepSpeedReference12 = <StandardFunctions.MultiStepSpeedReference12: (0x122e, 2)>
- MultiStepSpeedReference13 = <StandardFunctions.MultiStepSpeedReference13: (0x1230, 2)>
- MultiStepSpeedReference14 = <StandardFunctions.MultiStepSpeedReference14: (0x1232, 2)>
- MultiStepSpeedReference15 = <StandardFunctions.MultiStepSpeedReference15: (0x1234, 2)>
- MultiStepSpeedReference2 = <StandardFunctions.MultiStepSpeedReference2: (0x121a, 2)>
- MultiStepSpeedReference3 = <StandardFunctions.MultiStepSpeedReference3: (0x121c, 2)>
- MultiStepSpeedReference4 = <StandardFunctions.MultiStepSpeedReference4: (0x121e, 2)>
- MultiStepSpeedReference5 = <StandardFunctions.MultiStepSpeedReference5: (0x1220, 2)>
- MultiStepSpeedReference6 = <StandardFunctions.MultiStepSpeedReference6: (0x1222, 2)>
- MultiStepSpeedReference7 = <StandardFunctions.MultiStepSpeedReference7: (0x1224, 2)>
- MultiStepSpeedReference8 = <StandardFunctions.MultiStepSpeedReference8: (0x1226, 2)>
- MultiStepSpeedReference9 = <StandardFunctions.MultiStepSpeedReference9: (0x1228, 2)>
- MultiStepSpeedSelection = <StandardFunctions.MultiStepSpeedSelection: (0x1215, 1)>
- OperationFrequencyInputASelection = <StandardFunctions.OperationFrequencyInputASelection: (0x12af, 1)>
- OperationFrequencyInputBSelection = <StandardFunctions.OperationFrequencyInputBSelection: (0x12b0, 1)>
- OperationSelection = <StandardFunctions.OperationSelection: (0x12b1, 1)>
- OutputVoltageGain = <StandardFunctions.OutputVoltageGain: (0x123f, 1)>
- PIDDGain = <StandardFunctions.PIDDGain: (0x1262, 1)>
- PIDFeedForwardSelection = <StandardFunctions.PIDFeedForwardSelection: (0x1267, 1)>
- PIDFeedbackSelection = <StandardFunctions.PIDFeedbackSelection: (0x1264, 1)>
- PIDIGain = <StandardFunctions.PIDIGain: (0x1261, 1)>
- PIDOutputLimitFunction = <StandardFunctions.PIDOutputLimitFunction: (0x1266, 1)>
- PIDPGain = <StandardFunctions.PIDPGain: (0x1260, 1)>
- PIDScale = <StandardFunctions.PIDScale: (0x1263, 1)>
- PIDSelection = <StandardFunctions.PIDSelection: (0x125f, 1)>
- PIDSleepFunctionActionDelayTime = <StandardFunctions.PIDSleepFunctionActionDelayTime: (0x12c2, 1)>
- PIDSleepFunctionActionThreshold = <StandardFunctions.PIDSleepFunctionActionThreshold: (0x12c0, 2)>
- ReversePIDFunction = <StandardFunctions.ReversePIDFunction: (0x1265, 1)>
- RunCommandSelection = <StandardFunctions.RunCommandSelection: (0x1202, 1)>
- StartupDCInjectionBrakingPower = <StandardFunctions.StartupDCInjectionBrakingPower: (0x124b, 1)>
- StartupDCInjectionBrakingTime = <StandardFunctions.StartupDCInjectionBrakingTime: (0x124c, 1)>
- TorqueBoostSelection = <StandardFunctions.TorqueBoostSelection: (0x123b, 1)>
- VFCharacteristicsSelection = <StandardFunctions.VFCharacteristicsSelection: (0x123e, 1)>
- VRInputActiveRangeEndFrequency = <StandardFunctions.VRInputActiveRangeEndFrequency: (0x12c8, 2)>
- VRInputActiveRangeEndVoltage = <StandardFunctions.VRInputActiveRangeEndVoltage: (0x12cb, 1)>
- VRInputActiveRangeStartCurrent = <StandardFunctions.VRInputActiveRangeStartCurrent: (0x12ca, 1)>
- VRInputActiveRangeStartFrequency = <StandardFunctions.VRInputActiveRangeStartFrequency: (0x12c6, 2)>
- VRInputStartFrequencyEnable = <StandardFunctions.VRInputStartFrequencyEnable: (0x12cc, 1)>
- VoltageEndFrequency = <StandardFunctions.VoltageEndFrequency: (0x120d, 2)>
- VoltageEndRatio = <StandardFunctions.VoltageEndRatio: (0x1210, 1)>
- VoltageStartFrequency = <StandardFunctions.VoltageStartFrequency: (0x120b, 2)>
- VoltageStartRatio = <StandardFunctions.VoltageStartRatio: (0x120f, 1)>
- VoltageStartSelection = <StandardFunctions.VoltageStartSelection: (0x1211, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
GroupB = class FineTuningFunctions(Register) |
| |
GroupB(value, names=None, *, module=None, qualname=None, type=None, start=1)
Fine tuning function group. See datasheet
sections 3-6 (pp. 121-153) and B-4 (pp. 328-331).
|
| |
- Method resolution order:
- FineTuningFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- ActiveFrequencyMatchingRestartLevel = <FineTuningFunctions.ActiveFrequencyMatchingRestartLevel: (0x131d, 1)>
- ActiveFrequencyMatchingRestartParameter = <FineTuningFunctions.ActiveFrequencyMatchingRestartParameter: (0x131e, 1)>
- AllowableMomentaryPowerInterruptionTime = <FineTuningFunctions.AllowableMomentaryPowerInterruptionTime: (0x1302, 1)>
- AmbientTemperature = <FineTuningFunctions.AmbientTemperature: (0x134e, 1)>
- AnalogCurrentLevelAtDisconnection = <FineTuningFunctions.AnalogCurrentLevelAtDisconnection: (0x134a, 1)>
- AnalogVoltageLevelAtDisconnection = <FineTuningFunctions.AnalogVoltageLevelAtDisconnection: (0x1349, 1)>
- AutoReturnInitialDisplay = <FineTuningFunctions.AutoReturnInitialDisplay: (0x13a7, 1)>
- AutomaticCarrierFrequencyReduction = <FineTuningFunctions.AutomaticCarrierFrequencyReduction: (0x135c, 1)>
- BRDResistor = <FineTuningFunctions.BRDResistor: (0x1364, 1)>
- BrakeControlSelection = <FineTuningFunctions.BrakeControlSelection: (0x137b, 1)>
- BrakeInputFrequency = <FineTuningFunctions.BrakeInputFrequency: (0x1382, 1)>
- BrakeReleaseCurrent = <FineTuningFunctions.BrakeReleaseCurrent: (0x1381, 1)>
- BrakeReleaseFrequency = <FineTuningFunctions.BrakeReleaseFrequency: (0x1380, 1)>
- BrakeWaitTimeForAcceleration = <FineTuningFunctions.BrakeWaitTimeForAcceleration: (0x137d, 1)>
- BrakeWaitTimeForConfirmation = <FineTuningFunctions.BrakeWaitTimeForConfirmation: (0x137f, 1)>
- BrakeWaitTimeForRelease = <FineTuningFunctions.BrakeWaitTimeForRelease: (0x137c, 1)>
- BrakeWaitTimeForStopping = <FineTuningFunctions.BrakeWaitTimeForStopping: (0x137e, 1)>
- CarrierFrequency = <FineTuningFunctions.CarrierFrequency: (0x1356, 1)>
- ClearElapsedTimeOfCoolingFan = <FineTuningFunctions.ClearElapsedTimeOfCoolingFan: (0x1360, 1)>
- CoolingFanControl = <FineTuningFunctions.CoolingFanControl: (0x135f, 1)>
- DataReadWriteSelection = <FineTuningFunctions.DataReadWriteSelection: (0x13a9, 1)>
- DecelerationStartingWidthOfNonStopFunction = <FineTuningFunctions.DecelerationStartingWidthOfNonStopFunction: (0x1339, 1)>
- DecelerationTimeOfNonStopFunction = <FineTuningFunctions.DecelerationTimeOfNonStopFunction: (0x1337, 2)>
- DisplayExternalOperatorConnected = <FineTuningFunctions.DisplayExternalOperatorConnected: (0x139a, 1)>
- DisplaySelection = <FineTuningFunctions.DisplaySelection: (0x1327, 1)>
- DualRateSelection = <FineTuningFunctions.DualRateSelection: (0x1333, 1)>
- ElectronicThermalCharacteristicsSelection = <FineTuningFunctions.ElectronicThermalCharacteristicsSelection: (0x130e, 1)>
- ElectronicThermalCurrent1 = <FineTuningFunctions.ElectronicThermalCurrent1: (0x1311, 1)>
- ElectronicThermalCurrent2 = <FineTuningFunctions.ElectronicThermalCurrent2: (0x1313, 1)>
- ElectronicThermalCurrent3 = <FineTuningFunctions.ElectronicThermalCurrent3: (0x1315, 1)>
- ElectronicThermalFrequency1 = <FineTuningFunctions.ElectronicThermalFrequency1: (0x1310, 1)>
- ElectronicThermalFrequency2 = <FineTuningFunctions.ElectronicThermalFrequency2: (0x1312, 1)>
- ElectronicThermalFrequency3 = <FineTuningFunctions.ElectronicThermalFrequency3: (0x1314, 1)>
- ElectronicThermalLevel = <FineTuningFunctions.ElectronicThermalLevel: (0x130d, 1)>
- ExternalOperatorDisconnectionAction = <FineTuningFunctions.ExternalOperatorDisconnectionAction: (0x13a8, 1)>
- FirstDualMonitorParameter = <FineTuningFunctions.FirstDualMonitorParameter: (0x13a3, 1)>
- FreeRunStopSelection = <FineTuningFunctions.FreeRunStopSelection: (0x135b, 1)>
- FreeVfFrequency1 = <FineTuningFunctions.FreeVfFrequency1: (0x1367, 1)>
- FreeVfFrequency2 = <FineTuningFunctions.FreeVfFrequency2: (0x1369, 1)>
- FreeVfFrequency3 = <FineTuningFunctions.FreeVfFrequency3: (0x136b, 1)>
- FreeVfFrequency4 = <FineTuningFunctions.FreeVfFrequency4: (0x136d, 1)>
- FreeVfFrequency5 = <FineTuningFunctions.FreeVfFrequency5: (0x136f, 1)>
- FreeVfFrequency6 = <FineTuningFunctions.FreeVfFrequency6: (0x1371, 1)>
- FreeVfFrequency7 = <FineTuningFunctions.FreeVfFrequency7: (0x1373, 1)>
- FreeVfVoltage1 = <FineTuningFunctions.FreeVfVoltage1: (0x1368, 1)>
- FreeVfVoltage2 = <FineTuningFunctions.FreeVfVoltage2: (0x136a, 1)>
- FreeVfVoltage3 = <FineTuningFunctions.FreeVfVoltage3: (0x136c, 1)>
- FreeVfVoltage4 = <FineTuningFunctions.FreeVfVoltage4: (0x136e, 1)>
- FreeVfVoltage5 = <FineTuningFunctions.FreeVfVoltage5: (0x1370, 1)>
- FreeVfVoltage6 = <FineTuningFunctions.FreeVfVoltage6: (0x1372, 1)>
- FreeVfVoltage7 = <FineTuningFunctions.FreeVfVoltage7: (0x1374, 1)>
- FrequencyConversionCoefficient = <FineTuningFunctions.FrequencyConversionCoefficient: (0x1359, 1)>
- FrequencyMatchingLowerLimit = <FineTuningFunctions.FrequencyMatchingLowerLimit: (0x1307, 2)>
- FrequencySetInMonitoring = <FineTuningFunctions.FrequencySetInMonitoring: (0x13a6, 1)>
- GSInputMode = <FineTuningFunctions.GSInputMode: (0x1394, 1)>
- InitialScreenSelection = <FineTuningFunctions.InitialScreenSelection: (0x1328, 1)>
- InitializationParameterSelection = <FineTuningFunctions.InitializationParameterSelection: (0x1358, 1)>
- InitializationSelection = <FineTuningFunctions.InitializationSelection: (0x1357, 1)>
- InitializationTargetData = <FineTuningFunctions.InitializationTargetData: (0x1361, 1)>
- InitializeTrigger = <FineTuningFunctions.InitializeTrigger: (0x13b7, 1)>
- IntegratedPowerClear = <FineTuningFunctions.IntegratedPowerClear: (0x1351, 1)>
- IntegratedPowerDisplayGain = <FineTuningFunctions.IntegratedPowerDisplayGain: (0x1352, 1)>
- InverterModeSelection = <FineTuningFunctions.InverterModeSelection: (0x13ae, 1)>
- MomentaryPowerInterruptionRetryTimeSelection = <FineTuningFunctions.MomentaryPowerInterruptionRetryTimeSelection: (0x1305, 1)>
- MotorCableLengthParameter = <FineTuningFunctions.MotorCableLengthParameter: (0x1322, 1)>
- NonStopFunctionOnPowerInterruptionSelection = <FineTuningFunctions.NonStopFunctionOnPowerInterruptionSelection: (0x1334, 1)>
- OvercurrentSuppressionFunction = <FineTuningFunctions.OvercurrentSuppressionFunction: (0x131c, 1)>
- OverloadLimitLevel = <FineTuningFunctions.OverloadLimitLevel: (0x1317, 1)>
- OverloadLimitLevel2 = <FineTuningFunctions.OverloadLimitLevel2: (0x131a, 1)>
- OverloadLimitParameter = <FineTuningFunctions.OverloadLimitParameter: (0x1318, 1)>
- OverloadLimitParameter2 = <FineTuningFunctions.OverloadLimitParameter2: (0x131b, 1)>
- OverloadLimitSelection = <FineTuningFunctions.OverloadLimitSelection: (0x1316, 1)>
- OverloadLimitSelection2 = <FineTuningFunctions.OverloadLimitSelection2: (0x1319, 1)>
- OvervoltageProtectionDuringDeceleration = <FineTuningFunctions.OvervoltageProtectionDuringDeceleration: (0x1385, 1)>
- OvervoltageProtectionIntegralGain = <FineTuningFunctions.OvervoltageProtectionIntegralGain: (0x1389, 1)>
- OvervoltageProtectionLevelDuringDeceleration = <FineTuningFunctions.OvervoltageProtectionLevelDuringDeceleration: (0x1386, 1)>
- OvervoltageProtectionParameter = <FineTuningFunctions.OvervoltageProtectionParameter: (0x1387, 1)>
- OvervoltageProtectionProportionalGain = <FineTuningFunctions.OvervoltageProtectionProportionalGain: (0x1388, 1)>
- OvervoltageRetryTimeSelection = <FineTuningFunctions.OvervoltageRetryTimeSelection: (0x130b, 1)>
- PowerOnTimeSetting = <FineTuningFunctions.PowerOnTimeSetting: (0x1323, 2)>
- RateOfRegenerativeBrakingFunction = <FineTuningFunctions.RateOfRegenerativeBrakingFunction: (0x135d, 1)>
- ReducedVoltageStartupSelection = <FineTuningFunctions.ReducedVoltageStartupSelection: (0x1326, 1)>
- RegenerativeBrakingONLevel = <FineTuningFunctions.RegenerativeBrakingONLevel: (0x1363, 1)>
- RegenerativeBrakingOperation = <FineTuningFunctions.RegenerativeBrakingOperation: (0x1362, 1)>
- RetrySelection = <FineTuningFunctions.RetrySelection: (0x1301, 1)>
- RetryWaitTime = <FineTuningFunctions.RetryWaitTime: (0x1303, 1)>
- ReverseRotationPreventionSelection = <FineTuningFunctions.ReverseRotationPreventionSelection: (0x1330, 1)>
- RotationDirectionLimitSelection = <FineTuningFunctions.RotationDirectionLimitSelection: (0x1325, 1)>
- SecondDualMonitorParameter = <FineTuningFunctions.SecondDualMonitorParameter: (0x13a4, 1)>
- SoftLockSelection = <FineTuningFunctions.SoftLockSelection: (0x1320, 1)>
- StartingFrequency = <FineTuningFunctions.StartingFrequency: (0x1355, 1)>
- StartingFrequencyAtActiveFrequencyMatchingRestart = <FineTuningFunctions.StartingFrequencyAtActiveFrequencyMatchingRestart: (0x131f, 1)>
- StartingVoltageOfNonStopFunction = <FineTuningFunctions.StartingVoltageOfNonStopFunction: (0x1335, 1)>
- StopDecelerationLevelOfNonStopFunction = <FineTuningFunctions.StopDecelerationLevelOfNonStopFunction: (0x1336, 1)>
- StopKeySelection = <FineTuningFunctions.StopKeySelection: (0x135a, 1)>
- StopSelection = <FineTuningFunctions.StopSelection: (0x135e, 1)>
- ThermalAccumulatorGain = <FineTuningFunctions.ThermalAccumulatorGain: (0x13cb, 1)>
- ThermalDecrementMode = <FineTuningFunctions.ThermalDecrementMode: (0x13c6, 1)>
- ThermalDecrementTime = <FineTuningFunctions.ThermalDecrementTime: (0x13c7, 2)>
- ThermalDecrementTimeConstant = <FineTuningFunctions.ThermalDecrementTimeConstant: (0x13c9, 2)>
- TorqueLADSTOPSelection = <FineTuningFunctions.TorqueLADSTOPSelection: (0x132f, 1)>
- TorqueLimit1 = <FineTuningFunctions.TorqueLimit1: (0x132b, 1)>
- TorqueLimit2 = <FineTuningFunctions.TorqueLimit2: (0x132c, 1)>
- TorqueLimit3 = <FineTuningFunctions.TorqueLimit3: (0x132d, 1)>
- TorqueLimit4 = <FineTuningFunctions.TorqueLimit4: (0x132e, 1)>
- TorqueLimitSelection = <FineTuningFunctions.TorqueLimitSelection: (0x132a, 1)>
- TripRetrySelection = <FineTuningFunctions.TripRetrySelection: (0x1309, 1)>
- TripRetryWaitTime = <FineTuningFunctions.TripRetryWaitTime: (0x130c, 1)>
- UndervoltageTripDuringStopSelection = <FineTuningFunctions.UndervoltageTripDuringStopSelection: (0x1304, 1)>
- UserParameterAutomaticSettingFunctionSelection = <FineTuningFunctions.UserParameterAutomaticSettingFunctionSelection: (0x1329, 1)>
- WindowComparatorCurrentHysteresisWidth = <FineTuningFunctions.WindowComparatorCurrentHysteresisWidth: (0x1344, 1)>
- WindowComparatorLowerCurrentLevel = <FineTuningFunctions.WindowComparatorLowerCurrentLevel: (0x1343, 1)>
- WindowComparatorLowerVoltageLevel = <FineTuningFunctions.WindowComparatorLowerVoltageLevel: (0x1340, 1)>
- WindowComparatorUpperCurrentLevel = <FineTuningFunctions.WindowComparatorUpperCurrentLevel: (0x1342, 1)>
- WindowComparatorUpperVoltageLevel = <FineTuningFunctions.WindowComparatorUpperVoltageLevel: (0x133f, 1)>
- WindowComparatorVoltageHysteresisWidth = <FineTuningFunctions.WindowComparatorVoltageHysteresisWidth: (0x1341, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
GroupC = class IntelligentTerminalFunctions(Register) |
| |
GroupC(value, names=None, *, module=None, qualname=None, type=None, start=1)
Intelligent terminal function group. See datasheet
sections 3-7 (pp. 153-171) and B-4 (pp. 332-336).
|
| |
- Method resolution order:
- IntelligentTerminalFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AMBias = <IntelligentTerminalFunctions.AMBias: (0x1471, 1)>
- AMGain = <IntelligentTerminalFunctions.AMGain: (0x146e, 1)>
- AMTerminalFunction = <IntelligentTerminalFunctions.AMTerminalFunction: (0x141c, 1)>
- BaudRate = <IntelligentTerminalFunctions.BaudRate: (0x144b, 1)>
- CommunicationErrorEffect = <IntelligentTerminalFunctions.CommunicationErrorEffect: (0x1450, 1)>
- CommunicationErrorTimeout = <IntelligentTerminalFunctions.CommunicationErrorTimeout: (0x1451, 1)>
- CommunicationParity = <IntelligentTerminalFunctions.CommunicationParity: (0x144e, 1)>
- CommunicationSelection = <IntelligentTerminalFunctions.CommunicationSelection: (0x1464, 1)>
- CommunicationStopBits = <IntelligentTerminalFunctions.CommunicationStopBits: (0x144f, 1)>
- CommunicationWaitTime = <IntelligentTerminalFunctions.CommunicationWaitTime: (0x1452, 1)>
- CurrentMonitorReferenceValue = <IntelligentTerminalFunctions.CurrentMonitorReferenceValue: (0x141e, 1)>
- DebugMode = <IntelligentTerminalFunctions.DebugMode: (0x145f, 1)>
- DeviceID = <IntelligentTerminalFunctions.DeviceID: (0x144c, 1)>
- EOGain = <IntelligentTerminalFunctions.EOGain: (0x146d, 1)>
- EOOutputPulseTrainScaleConversion = <IntelligentTerminalFunctions.EOOutputPulseTrainScaleConversion: (0x1433, 1)>
- EOTerminalFunction = <IntelligentTerminalFunctions.EOTerminalFunction: (0x141b, 1)>
- EzCOMMasterEndAddress = <IntelligentTerminalFunctions.EzCOMMasterEndAddress: (0x1467, 1)>
- EzCOMMasterStartAddress = <IntelligentTerminalFunctions.EzCOMMasterStartAddress: (0x1466, 1)>
- EzCOMStartingTrigger = <IntelligentTerminalFunctions.EzCOMStartingTrigger: (0x1468, 1)>
- FinOverheatWarningLevel = <IntelligentTerminalFunctions.FinOverheatWarningLevel: (0x1444, 1)>
- ForwardPowerRunningOvertorqueLevel = <IntelligentTerminalFunctions.ForwardPowerRunningOvertorqueLevel: (0x143b, 1)>
- ForwardRegenerationOvertorqueLevel = <IntelligentTerminalFunctions.ForwardRegenerationOvertorqueLevel: (0x143e, 1)>
- InputTerminalResponseTime1 = <IntelligentTerminalFunctions.InputTerminalResponseTime1: (0x14a4, 1)>
- InputTerminalResponseTime2 = <IntelligentTerminalFunctions.InputTerminalResponseTime2: (0x14a5, 1)>
- InputTerminalResponseTime3 = <IntelligentTerminalFunctions.InputTerminalResponseTime3: (0x14a6, 1)>
- InputTerminalResponseTime4 = <IntelligentTerminalFunctions.InputTerminalResponseTime4: (0x14a7, 1)>
- InputTerminalResponseTime5 = <IntelligentTerminalFunctions.InputTerminalResponseTime5: (0x14a8, 1)>
- InputTerminalResponseTime6 = <IntelligentTerminalFunctions.InputTerminalResponseTime6: (0x14a9, 1)>
- InputTerminalResponseTime7 = <IntelligentTerminalFunctions.InputTerminalResponseTime7: (0x14aa, 1)>
- LightLoadDetectionLevel = <IntelligentTerminalFunctions.LightLoadDetectionLevel: (0x1427, 1)>
- LightLoadSignalOutputMode = <IntelligentTerminalFunctions.LightLoadSignalOutputMode: (0x1426, 1)>
- LogicOutputSignal1OperatorSelection = <IntelligentTerminalFunctions.LogicOutputSignal1OperatorSelection: (0x1494, 1)>
- LogicOutputSignal1Selection1 = <IntelligentTerminalFunctions.LogicOutputSignal1Selection1: (0x1492, 1)>
- LogicOutputSignal1Selection2 = <IntelligentTerminalFunctions.LogicOutputSignal1Selection2: (0x1493, 1)>
- LogicOutputSignal2OperatorSelection = <IntelligentTerminalFunctions.LogicOutputSignal2OperatorSelection: (0x1497, 1)>
- LogicOutputSignal2Selection1 = <IntelligentTerminalFunctions.LogicOutputSignal2Selection1: (0x1495, 1)>
- LogicOutputSignal2Selection2 = <IntelligentTerminalFunctions.LogicOutputSignal2Selection2: (0x1496, 1)>
- LogicOutputSignal3OperatorSelection = <IntelligentTerminalFunctions.LogicOutputSignal3OperatorSelection: (0x149a, 1)>
- LogicOutputSignal3Selection1 = <IntelligentTerminalFunctions.LogicOutputSignal3Selection1: (0x1498, 1)>
- LogicOutputSignal3Selection2 = <IntelligentTerminalFunctions.LogicOutputSignal3Selection2: (0x1499, 1)>
- MultiFunctionInput1Function = <IntelligentTerminalFunctions.MultiFunctionInput1Function: (0x1401, 1)>
- MultiFunctionInput1Type = <IntelligentTerminalFunctions.MultiFunctionInput1Type: (0x140b, 1)>
- MultiFunctionInput2Function = <IntelligentTerminalFunctions.MultiFunctionInput2Function: (0x1402, 1)>
- MultiFunctionInput2Type = <IntelligentTerminalFunctions.MultiFunctionInput2Type: (0x140c, 1)>
- MultiFunctionInput3Function = <IntelligentTerminalFunctions.MultiFunctionInput3Function: (0x1403, 1)>
- MultiFunctionInput3Type = <IntelligentTerminalFunctions.MultiFunctionInput3Type: (0x140d, 1)>
- MultiFunctionInput4Function = <IntelligentTerminalFunctions.MultiFunctionInput4Function: (0x1404, 1)>
- MultiFunctionInput4Type = <IntelligentTerminalFunctions.MultiFunctionInput4Type: (0x140e, 1)>
- MultiFunctionInput5Function = <IntelligentTerminalFunctions.MultiFunctionInput5Function: (0x1405, 1)>
- MultiFunctionInput5Type = <IntelligentTerminalFunctions.MultiFunctionInput5Type: (0x140f, 1)>
- MultiFunctionInput6Function = <IntelligentTerminalFunctions.MultiFunctionInput6Function: (0x1406, 1)>
- MultiFunctionInput6Type = <IntelligentTerminalFunctions.MultiFunctionInput6Type: (0x1410, 1)>
- MultiFunctionInput7Function = <IntelligentTerminalFunctions.MultiFunctionInput7Function: (0x1407, 1)>
- MultiFunctionInput7Type = <IntelligentTerminalFunctions.MultiFunctionInput7Type: (0x1411, 1)>
- MultiFunctionOutput11Function = <IntelligentTerminalFunctions.MultiFunctionOutput11Function: (0x1415, 1)>
- MultiFunctionOutput11Type = <IntelligentTerminalFunctions.MultiFunctionOutput11Type: (0x141f, 1)>
- MultiFunctionOutput12Function = <IntelligentTerminalFunctions.MultiFunctionOutput12Function: (0x1416, 1)>
- MultiFunctionOutput12Type = <IntelligentTerminalFunctions.MultiFunctionOutput12Type: (0x1420, 1)>
- MultiStepSpeedPositionDeterminationTime = <IntelligentTerminalFunctions.MultiStepSpeedPositionDeterminationTime: (0x14ad, 1)>
- OAdjustment = <IntelligentTerminalFunctions.OAdjustment: (0x1455, 1)>
- OIAdjustment = <IntelligentTerminalFunctions.OIAdjustment: (0x1456, 1)>
- Output11OffDelay = <IntelligentTerminalFunctions.Output11OffDelay: (0x1487, 1)>
- Output11OnDelay = <IntelligentTerminalFunctions.Output11OnDelay: (0x1486, 1)>
- Output12OffDelay = <IntelligentTerminalFunctions.Output12OffDelay: (0x1489, 1)>
- Output12OnDelay = <IntelligentTerminalFunctions.Output12OnDelay: (0x1488, 1)>
- OverloadWarningLevel = <IntelligentTerminalFunctions.OverloadWarningLevel: (0x1429, 1)>
- OverloadWarningLevel2 = <IntelligentTerminalFunctions.OverloadWarningLevel2: (0x1473, 1)>
- OverloadWarningSignalOutputMode = <IntelligentTerminalFunctions.OverloadWarningSignalOutputMode: (0x1428, 1)>
- PIDDeviationExcessiveLevel = <IntelligentTerminalFunctions.PIDDeviationExcessiveLevel: (0x142e, 1)>
- PIDFeedbackLowerLimit = <IntelligentTerminalFunctions.PIDFeedbackLowerLimit: (0x1439, 1)>
- PIDFeedbackUpperLimit = <IntelligentTerminalFunctions.PIDFeedbackUpperLimit: (0x1438, 1)>
- RelayOutputFunction = <IntelligentTerminalFunctions.RelayOutputFunction: (0x141a, 1)>
- RelayOutputOffDelay = <IntelligentTerminalFunctions.RelayOutputOffDelay: (0x1491, 1)>
- RelayOutputOnDelay = <IntelligentTerminalFunctions.RelayOutputOnDelay: (0x1490, 1)>
- RelayOutputType = <IntelligentTerminalFunctions.RelayOutputType: (0x1424, 1)>
- ResetButtonSetting = <IntelligentTerminalFunctions.ResetButtonSetting: (0x146a, 1)>
- RestartFrequencyMatchingSelection = <IntelligentTerminalFunctions.RestartFrequencyMatchingSelection: (0x146b, 1)>
- ReversePowerRunningOvertorqueLevel = <IntelligentTerminalFunctions.ReversePowerRunningOvertorqueLevel: (0x143d, 1)>
- ReverseRegenerationOvertorqueLevel = <IntelligentTerminalFunctions.ReverseRegenerationOvertorqueLevel: (0x143c, 1)>
- TargetFrequencyDuringAcceleration = <IntelligentTerminalFunctions.TargetFrequencyDuringAcceleration: (0x142a, 2)>
- TargetFrequencyDuringAcceleration2 = <IntelligentTerminalFunctions.TargetFrequencyDuringAcceleration2: (0x142f, 2)>
- TargetFrequencyDuringDeceleration = <IntelligentTerminalFunctions.TargetFrequencyDuringDeceleration: (0x142c, 2)>
- TargetFrequencyDuringDeceleration2 = <IntelligentTerminalFunctions.TargetFrequencyDuringDeceleration2: (0x1431, 2)>
- ThermalWarningLevel = <IntelligentTerminalFunctions.ThermalWarningLevel: (0x1441, 1)>
- ThermistorAdjustment = <IntelligentTerminalFunctions.ThermistorAdjustment: (0x1459, 1)>
- TorqueModeSelection = <IntelligentTerminalFunctions.TorqueModeSelection: (0x143a, 1)>
- TorqueSignalOutputMode = <IntelligentTerminalFunctions.TorqueSignalOutputMode: (0x143f, 1)>
- UpDownButtonClearMode = <IntelligentTerminalFunctions.UpDownButtonClearMode: (0x146c, 1)>
- UpDownButtonSetting = <IntelligentTerminalFunctions.UpDownButtonSetting: (0x1469, 1)>
- ZeroHzDetectionLevel = <IntelligentTerminalFunctions.ZeroHzDetectionLevel: (0x1443, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
GroupD = class MonitoringFunctions(Register) |
| |
GroupD(value, names=None, *, module=None, qualname=None, type=None, start=1)
Intelligent terminal function group. See datasheet
sections 3-3 (pp. 74-88) and B-4 (pp. 319-320 and 322-323).
|
| |
- Method resolution order:
- MonitoringFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AnalogInputO = <MonitoringFunctions.AnalogInputO: (0x10a1, 1)>
- AnalogInputOI = <MonitoringFunctions.AnalogInputOI: (0x10a2, 1)>
- ConvertedOutputFrequency = <MonitoringFunctions.ConvertedOutputFrequency: (0x1009, 2)>
- CurrentPosition = <MonitoringFunctions.CurrentPosition: (0x1038, 2)>
- DCVoltage = <MonitoringFunctions.DCVoltage: (0x1026, 1)>
- DriveProgramming0 = <MonitoringFunctions.DriveProgramming0: (0x102e, 2)>
- DriveProgramming1 = <MonitoringFunctions.DriveProgramming1: (0x1030, 2)>
- DriveProgramming2 = <MonitoringFunctions.DriveProgramming2: (0x1032, 2)>
- ElectronicThermalMonitor = <MonitoringFunctions.ElectronicThermalMonitor: (0x1028, 1)>
- FaultFrequencyMonitor = <MonitoringFunctions.FaultFrequencyMonitor: (0x11, 1)>
- FaultMonitor1 = <MonitoringFunctions.FaultMonitor1: (0x12, 1)>
- FaultMonitor1Current = <MonitoringFunctions.FaultMonitor1Current: (0x16, 1)>
- FaultMonitor1Frequency = <MonitoringFunctions.FaultMonitor1Frequency: (0x14, 2)>
- FaultMonitor1InverterStatus = <MonitoringFunctions.FaultMonitor1InverterStatus: (0x13, 1)>
- FaultMonitor1PowerOnTime = <MonitoringFunctions.FaultMonitor1PowerOnTime: (0x1a, 2)>
- FaultMonitor1RunningTime = <MonitoringFunctions.FaultMonitor1RunningTime: (0x18, 2)>
- FaultMonitor1Voltage = <MonitoringFunctions.FaultMonitor1Voltage: (0x17, 1)>
- FaultMonitor2 = <MonitoringFunctions.FaultMonitor2: (0x1c, 1)>
- FaultMonitor2Current = <MonitoringFunctions.FaultMonitor2Current: (0x20, 1)>
- FaultMonitor2Frequency = <MonitoringFunctions.FaultMonitor2Frequency: (0x1e, 2)>
- FaultMonitor2InverterStatus = <MonitoringFunctions.FaultMonitor2InverterStatus: (0x1d, 1)>
- FaultMonitor2PowerOnTime = <MonitoringFunctions.FaultMonitor2PowerOnTime: (0x24, 2)>
- FaultMonitor2RunningTime = <MonitoringFunctions.FaultMonitor2RunningTime: (0x22, 2)>
- FaultMonitor2Voltage = <MonitoringFunctions.FaultMonitor2Voltage: (0x21, 1)>
- FaultMonitor3 = <MonitoringFunctions.FaultMonitor3: (0x26, 1)>
- FaultMonitor3Current = <MonitoringFunctions.FaultMonitor3Current: (0x2a, 1)>
- FaultMonitor3Frequency = <MonitoringFunctions.FaultMonitor3Frequency: (0x28, 2)>
- FaultMonitor3InverterStatus = <MonitoringFunctions.FaultMonitor3InverterStatus: (0x27, 1)>
- FaultMonitor3PowerOnTime = <MonitoringFunctions.FaultMonitor3PowerOnTime: (0x2e, 2)>
- FaultMonitor3RunningTime = <MonitoringFunctions.FaultMonitor3RunningTime: (0x2c, 2)>
- FaultMonitor3Voltage = <MonitoringFunctions.FaultMonitor3Voltage: (0x2b, 1)>
- FaultMonitor4 = <MonitoringFunctions.FaultMonitor4: (0x30, 1)>
- FaultMonitor4Current = <MonitoringFunctions.FaultMonitor4Current: (0x34, 1)>
- FaultMonitor4Frequency = <MonitoringFunctions.FaultMonitor4Frequency: (0x32, 2)>
- FaultMonitor4InverterStatus = <MonitoringFunctions.FaultMonitor4InverterStatus: (0x31, 1)>
- FaultMonitor4PowerOnTime = <MonitoringFunctions.FaultMonitor4PowerOnTime: (0x38, 2)>
- FaultMonitor4RunningTime = <MonitoringFunctions.FaultMonitor4RunningTime: (0x36, 2)>
- FaultMonitor4Voltage = <MonitoringFunctions.FaultMonitor4Voltage: (0x35, 1)>
- FaultMonitor5 = <MonitoringFunctions.FaultMonitor5: (0x3a, 1)>
- FaultMonitor5Current = <MonitoringFunctions.FaultMonitor5Current: (0x3e, 1)>
- FaultMonitor5Frequency = <MonitoringFunctions.FaultMonitor5Frequency: (0x3c, 2)>
- FaultMonitor5InverterStatus = <MonitoringFunctions.FaultMonitor5InverterStatus: (0x3b, 1)>
- FaultMonitor5PowerOnTime = <MonitoringFunctions.FaultMonitor5PowerOnTime: (0x42, 2)>
- FaultMonitor5RunningTime = <MonitoringFunctions.FaultMonitor5RunningTime: (0x40, 2)>
- FaultMonitor5Voltage = <MonitoringFunctions.FaultMonitor5Voltage: (0x3f, 1)>
- FaultMonitor6 = <MonitoringFunctions.FaultMonitor6: (0x44, 1)>
- FaultMonitor6Current = <MonitoringFunctions.FaultMonitor6Current: (0x48, 1)>
- FaultMonitor6Frequency = <MonitoringFunctions.FaultMonitor6Frequency: (0x46, 2)>
- FaultMonitor6InverterStatus = <MonitoringFunctions.FaultMonitor6InverterStatus: (0x45, 1)>
- FaultMonitor6PowerOnTime = <MonitoringFunctions.FaultMonitor6PowerOnTime: (0x4c, 2)>
- FaultMonitor6RunningTime = <MonitoringFunctions.FaultMonitor6RunningTime: (0x4a, 2)>
- FaultMonitor6Voltage = <MonitoringFunctions.FaultMonitor6Voltage: (0x49, 1)>
- FinTemperature = <MonitoringFunctions.FinTemperature: (0x1019, 1)>
- FrequencySource = <MonitoringFunctions.FrequencySource: (0x1059, 1)>
- InputPower = <MonitoringFunctions.InputPower: (0x1012, 1)>
- InverterMode = <MonitoringFunctions.InverterMode: (0x1057, 1)>
- LifeAssessment = <MonitoringFunctions.LifeAssessment: (0x101d, 1)>
- MultiFunctionInputs = <MonitoringFunctions.MultiFunctionInputs: (0x1007, 1)>
- MultiFunctionOutputs = <MonitoringFunctions.MultiFunctionOutputs: (0x1008, 1)>
- OutputCurrent = <MonitoringFunctions.OutputCurrent: (0x1003, 1)>
- OutputFrequency = <MonitoringFunctions.OutputFrequency: (0x1001, 2)>
- OutputTorque = <MonitoringFunctions.OutputTorque: (0x1010, 1)>
- OutputVoltage = <MonitoringFunctions.OutputVoltage: (0x1011, 1)>
- PIDDeviation = <MonitoringFunctions.PIDDeviation: (0x10a6, 1)>
- PIDFeedbackValue = <MonitoringFunctions.PIDFeedbackValue: (0x1005, 2)>
- PIDOutput = <MonitoringFunctions.PIDOutput: (0x10a8, 1)>
- PositionCommand = <MonitoringFunctions.PositionCommand: (0x1036, 2)>
- PowerOnTime = <MonitoringFunctions.PowerOnTime: (0x1017, 2)>
- ProgramCounter = <MonitoringFunctions.ProgramCounter: (0x101e, 1)>
- ProgramNumber = <MonitoringFunctions.ProgramNumber: (0x101f, 1)>
- PulseTrainInput = <MonitoringFunctions.PulseTrainInput: (0x10a4, 1)>
- RealFrequency = <MonitoringFunctions.RealFrequency: (0x100b, 2)>
- RegenerativeBrakingLoadRate = <MonitoringFunctions.RegenerativeBrakingLoadRate: (0x1027, 1)>
- RotationDirection = <MonitoringFunctions.RotationDirection: (0x1004, 1)>
- RunSource = <MonitoringFunctions.RunSource: (0x105a, 1)>
- TorqueBias = <MonitoringFunctions.TorqueBias: (0x100e, 1)>
- TorqueReference = <MonitoringFunctions.TorqueReference: (0x100d, 1)>
- TotalRunTime = <MonitoringFunctions.TotalRunTime: (0x1015, 2)>
- WarningMonitor = <MonitoringFunctions.WarningMonitor: (0x4e, 1)>
- WattHour = <MonitoringFunctions.WattHour: (0x1013, 2)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
GroupF = class MainProfileParameters(Register) |
| |
GroupF(value, names=None, *, module=None, qualname=None, type=None, start=1)
Main profile parameters group. See datasheet
sections 3-4 (p. 89) and B-4 (pp. 319-320, 322-323 and 344).
|
| |
- Method resolution order:
- MainProfileParameters
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AccelerationTime1 = <MainProfileParameters.AccelerationTime1: (0x1103, 2)>
- DecelerationTime1 = <MainProfileParameters.DecelerationTime1: (0x1105, 2)>
- OperatorRotationDirection = <MainProfileParameters.OperatorRotationDirection: (0x1107, 1)>
- OutputFrequency = <MainProfileParameters.OutputFrequency: (0x01, 2)>
- SecondAccelerationTime1 = <MainProfileParameters.SecondAccelerationTime1: (0x2103, 2)>
- SecondDecelerationTime1 = <MainProfileParameters.SecondDecelerationTime1: (0x2105, 2)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
GroupH = class MotorConstantsFunctions(Register) |
| |
GroupH(value, names=None, *, module=None, qualname=None, type=None, start=1)
Motor constants function group. See datasheet
sections 3-8 (pp. 172-178) and B-4 (pp. 337-338).
|
| |
- Method resolution order:
- MotorConstantsFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AutoTuningPMParameterLd = <MotorConstantsFunctions.AutoTuningPMParameterLd: (0x157c, 1)>
- AutoTuningPMParameterLq = <MotorConstantsFunctions.AutoTuningPMParameterLq: (0x157d, 1)>
- AutoTuningPMParameterR = <MotorConstantsFunctions.AutoTuningPMParameterR: (0x157b, 1)>
- AutoTuningParameterIo = <MotorConstantsFunctions.AutoTuningParameterIo: (0x152b, 1)>
- AutoTuningParameterJ = <MotorConstantsFunctions.AutoTuningParameterJ: (0x152c, 2)>
- AutoTuningParameterR1 = <MotorConstantsFunctions.AutoTuningParameterR1: (0x1525, 1)>
- AutoTuningParameterR2 = <MotorConstantsFunctions.AutoTuningParameterR2: (0x1527, 1)>
- AutoTuningSelection = <MotorConstantsFunctions.AutoTuningSelection: (0x1501, 1)>
- H022 = <MotorConstantsFunctions.H022: (0x151a, 1)>
- H032 = <MotorConstantsFunctions.H032: (0x1529, 1)>
- MotorCapacitySelection = <MotorConstantsFunctions.MotorCapacitySelection: (0x1503, 1)>
- MotorParameterIo = <MotorConstantsFunctions.MotorParameterIo: (0x151c, 1)>
- MotorParameterJ = <MotorConstantsFunctions.MotorParameterJ: (0x151d, 2)>
- MotorParameterR1 = <MotorConstantsFunctions.MotorParameterR1: (0x1516, 1)>
- MotorParameterR2 = <MotorConstantsFunctions.MotorParameterR2: (0x1518, 1)>
- MotorParameterSelection = <MotorConstantsFunctions.MotorParameterSelection: (0x1502, 1)>
- MotorPoleNumberSelection = <MotorConstantsFunctions.MotorPoleNumberSelection: (0x1504, 1)>
- PMIMPE0VWait = <MotorConstantsFunctions.PMIMPE0VWait: (0x158a, 1)>
- PMIMPEDetect = <MotorConstantsFunctions.PMIMPEDetect: (0x158c, 1)>
- PMIMPEDetectWait = <MotorConstantsFunctions.PMIMPEDetectWait: (0x158b, 1)>
- PMIMPEVoltageGain = <MotorConstantsFunctions.PMIMPEVoltageGain: (0x158d, 1)>
- PMMinimumFrequency = <MotorConstantsFunctions.PMMinimumFrequency: (0x1586, 1)>
- PMMotorCapacity = <MotorConstantsFunctions.PMMotorCapacity: (0x1572, 1)>
- PMMotorCodeSelection = <MotorConstantsFunctions.PMMotorCodeSelection: (0x1571, 1)>
- PMMotorPoleNumberSelection = <MotorConstantsFunctions.PMMotorPoleNumberSelection: (0x1573, 1)>
- PMNoLoadCurrent = <MotorConstantsFunctions.PMNoLoadCurrent: (0x1587, 1)>
- PMParameterJ = <MotorConstantsFunctions.PMParameterJ: (0x1579, 2)>
- PMParameterKe = <MotorConstantsFunctions.PMParameterKe: (0x1578, 1)>
- PMParameterLd = <MotorConstantsFunctions.PMParameterLd: (0x1576, 1)>
- PMParameterLq = <MotorConstantsFunctions.PMParameterLq: (0x1577, 1)>
- PMParameterR = <MotorConstantsFunctions.PMParameterR: (0x1575, 1)>
- PMRatedCurrent = <MotorConstantsFunctions.PMRatedCurrent: (0x1574, 1)>
- PMSpeedResponse = <MotorConstantsFunctions.PMSpeedResponse: (0x1581, 1)>
- PMStabilizationConstant = <MotorConstantsFunctions.PMStabilizationConstant: (0x1584, 1)>
- PMStartingCurrent = <MotorConstantsFunctions.PMStartingCurrent: (0x1582, 1)>
- PMStartingMethod = <MotorConstantsFunctions.PMStartingMethod: (0x1588, 1)>
- PMStartingTime = <MotorConstantsFunctions.PMStartingTime: (0x1583, 1)>
- SlipCompensationIGain = <MotorConstantsFunctions.SlipCompensationIGain: (0x153e, 1)>
- SlipCompensationPGain = <MotorConstantsFunctions.SlipCompensationPGain: (0x153d, 1)>
- SpeedResponse = <MotorConstantsFunctions.SpeedResponse: (0x1506, 1)>
- StabilizationParameter = <MotorConstantsFunctions.StabilizationParameter: (0x1507, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
GroupP = class OtherParameters(Register) |
| |
GroupP(value, names=None, *, module=None, qualname=None, type=None, start=1)
Other parameters group. See datasheet
sections 3-9 (pp. 179-190) and B-4 (pp. 339-343).
|
| |
- Method resolution order:
- OtherParameters
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AccelerationDecelerationTimeInputType = <OtherParameters.AccelerationDecelerationTimeInputType: (0x161f, 1)>
- CANOpenCommunicationSpeed = <OtherParameters.CANOpenCommunicationSpeed: (0x16bc, 1)>
- CANOpenNodeAddress = <OtherParameters.CANOpenNodeAddress: (0x16bb, 1)>
- CommunicationErrorEffect = <OtherParameters.CommunicationErrorEffect: (0x162f, 1)>
- CompoNetNodeAddress = <OtherParameters.CompoNetNodeAddress: (0x16c0, 1)>
- CreepSpeed = <OtherParameters.CreepSpeed: (0x160f, 1)>
- CurrentPositionAtPowerOff = <OtherParameters.CurrentPositionAtPowerOff: (0x165e, 1)>
- DeviceNetNodeAddress = <OtherParameters.DeviceNetNodeAddress: (0x16c2, 1)>
- DriveProgramParameterU00 = <OtherParameters.DriveProgramParameterU00: (0x1666, 1)>
- DriveProgramParameterU01 = <OtherParameters.DriveProgramParameterU01: (0x1667, 1)>
- DriveProgramParameterU02 = <OtherParameters.DriveProgramParameterU02: (0x1668, 1)>
- DriveProgramParameterU03 = <OtherParameters.DriveProgramParameterU03: (0x1669, 1)>
- DriveProgramParameterU04 = <OtherParameters.DriveProgramParameterU04: (0x166a, 1)>
- DriveProgramParameterU05 = <OtherParameters.DriveProgramParameterU05: (0x166b, 1)>
- DriveProgramParameterU06 = <OtherParameters.DriveProgramParameterU06: (0x166c, 1)>
- DriveProgramParameterU07 = <OtherParameters.DriveProgramParameterU07: (0x166d, 1)>
- DriveProgramParameterU08 = <OtherParameters.DriveProgramParameterU08: (0x166e, 1)>
- DriveProgramParameterU09 = <OtherParameters.DriveProgramParameterU09: (0x166f, 1)>
- DriveProgramParameterU10 = <OtherParameters.DriveProgramParameterU10: (0x1670, 1)>
- DriveProgramParameterU11 = <OtherParameters.DriveProgramParameterU11: (0x1671, 1)>
- DriveProgramParameterU12 = <OtherParameters.DriveProgramParameterU12: (0x1672, 1)>
- DriveProgramParameterU13 = <OtherParameters.DriveProgramParameterU13: (0x1673, 1)>
- DriveProgramParameterU14 = <OtherParameters.DriveProgramParameterU14: (0x1674, 1)>
- DriveProgramParameterU15 = <OtherParameters.DriveProgramParameterU15: (0x1675, 1)>
- DriveProgramParameterU16 = <OtherParameters.DriveProgramParameterU16: (0x1676, 1)>
- DriveProgramParameterU17 = <OtherParameters.DriveProgramParameterU17: (0x1677, 1)>
- DriveProgramParameterU18 = <OtherParameters.DriveProgramParameterU18: (0x1678, 1)>
- DriveProgramParameterU19 = <OtherParameters.DriveProgramParameterU19: (0x1679, 1)>
- DriveProgramParameterU20 = <OtherParameters.DriveProgramParameterU20: (0x167a, 1)>
- DriveProgramParameterU21 = <OtherParameters.DriveProgramParameterU21: (0x167b, 1)>
- DriveProgramParameterU22 = <OtherParameters.DriveProgramParameterU22: (0x167c, 1)>
- DriveProgramParameterU23 = <OtherParameters.DriveProgramParameterU23: (0x167d, 1)>
- DriveProgramParameterU24 = <OtherParameters.DriveProgramParameterU24: (0x167e, 1)>
- DriveProgramParameterU25 = <OtherParameters.DriveProgramParameterU25: (0x167f, 1)>
- DriveProgramParameterU26 = <OtherParameters.DriveProgramParameterU26: (0x1680, 1)>
- DriveProgramParameterU27 = <OtherParameters.DriveProgramParameterU27: (0x1681, 1)>
- DriveProgramParameterU28 = <OtherParameters.DriveProgramParameterU28: (0x1682, 1)>
- DriveProgramParameterU29 = <OtherParameters.DriveProgramParameterU29: (0x1683, 1)>
- DriveProgramParameterU30 = <OtherParameters.DriveProgramParameterU30: (0x1684, 1)>
- DriveProgramParameterU31 = <OtherParameters.DriveProgramParameterU31: (0x1685, 1)>
- EATerminalFunction = <OtherParameters.EATerminalFunction: (0x1603, 1)>
- EZCOMMDestination1Address = <OtherParameters.EZCOMMDestination1Address: (0x168f, 1)>
- EZCOMMDestination1Register = <OtherParameters.EZCOMMDestination1Register: (0x1690, 1)>
- EZCOMMDestination2Address = <OtherParameters.EZCOMMDestination2Address: (0x1692, 1)>
- EZCOMMDestination2Register = <OtherParameters.EZCOMMDestination2Register: (0x1693, 1)>
- EZCOMMDestination3Address = <OtherParameters.EZCOMMDestination3Address: (0x1695, 1)>
- EZCOMMDestination3Register = <OtherParameters.EZCOMMDestination3Register: (0x1696, 1)>
- EZCOMMDestination4Address = <OtherParameters.EZCOMMDestination4Address: (0x1698, 1)>
- EZCOMMDestination4Register = <OtherParameters.EZCOMMDestination4Register: (0x1699, 1)>
- EZCOMMDestination5Address = <OtherParameters.EZCOMMDestination5Address: (0x169b, 1)>
- EZCOMMDestination5Register = <OtherParameters.EZCOMMDestination5Register: (0x169c, 1)>
- EZCOMMSource1Register = <OtherParameters.EZCOMMSource1Register: (0x1691, 1)>
- EZCOMMSource2Register = <OtherParameters.EZCOMMSource2Register: (0x1694, 1)>
- EZCOMMSource3Register = <OtherParameters.EZCOMMSource3Register: (0x1697, 1)>
- EZCOMMSource4Register = <OtherParameters.EZCOMMSource4Register: (0x169a, 1)>
- EZCOMMSource5Register = <OtherParameters.EZCOMMSource5Register: (0x169d, 1)>
- EncoderDisconnectionTimeout = <OtherParameters.EncoderDisconnectionTimeout: (0x1659, 1)>
- EncoderPulses = <OtherParameters.EncoderPulses: (0x160b, 1)>
- Endianness = <OtherParameters.Endianness: (0x16f1, 1)>
- EzCOMMDataCount = <OtherParameters.EzCOMMDataCount: (0x168e, 1)>
- ForwardPositionRangeSpecification = <OtherParameters.ForwardPositionRangeSpecification: (0x1652, 2)>
- ForwardTorqueControlSpeedLimitValue = <OtherParameters.ForwardTorqueControlSpeedLimitValue: (0x1627, 2)>
- HighSpeedZeroReturnFrequency = <OtherParameters.HighSpeedZeroReturnFrequency: (0x1651, 1)>
- InstanceNumber = <OtherParameters.InstanceNumber: (0x1630, 1)>
- LowSpeedZeroReturnFrequency = <OtherParameters.LowSpeedZeroReturnFrequency: (0x1650, 1)>
- ModbusExternalRegister1 = <OtherParameters.ModbusExternalRegister1: (0x16c9, 1)>
- ModbusExternalRegister10 = <OtherParameters.ModbusExternalRegister10: (0x16d2, 1)>
- ModbusExternalRegister2 = <OtherParameters.ModbusExternalRegister2: (0x16ca, 1)>
- ModbusExternalRegister3 = <OtherParameters.ModbusExternalRegister3: (0x16cb, 1)>
- ModbusExternalRegister4 = <OtherParameters.ModbusExternalRegister4: (0x16cc, 1)>
- ModbusExternalRegister5 = <OtherParameters.ModbusExternalRegister5: (0x16cd, 1)>
- ModbusExternalRegister6 = <OtherParameters.ModbusExternalRegister6: (0x16ce, 1)>
- ModbusExternalRegister7 = <OtherParameters.ModbusExternalRegister7: (0x16cf, 1)>
- ModbusExternalRegister8 = <OtherParameters.ModbusExternalRegister8: (0x16d0, 1)>
- ModbusExternalRegister9 = <OtherParameters.ModbusExternalRegister9: (0x16d1, 1)>
- ModbusInternalRegister1 = <OtherParameters.ModbusInternalRegister1: (0x16e7, 1)>
- ModbusInternalRegister10 = <OtherParameters.ModbusInternalRegister10: (0x16f0, 1)>
- ModbusInternalRegister2 = <OtherParameters.ModbusInternalRegister2: (0x16e8, 1)>
- ModbusInternalRegister3 = <OtherParameters.ModbusInternalRegister3: (0x16e9, 1)>
- ModbusInternalRegister4 = <OtherParameters.ModbusInternalRegister4: (0x16ea, 1)>
- ModbusInternalRegister5 = <OtherParameters.ModbusInternalRegister5: (0x16eb, 1)>
- ModbusInternalRegister6 = <OtherParameters.ModbusInternalRegister6: (0x16ec, 1)>
- ModbusInternalRegister7 = <OtherParameters.ModbusInternalRegister7: (0x16ed, 1)>
- ModbusInternalRegister8 = <OtherParameters.ModbusInternalRegister8: (0x16ee, 1)>
- ModbusInternalRegister9 = <OtherParameters.ModbusInternalRegister9: (0x16ef, 1)>
- ModbusRegisterFormat1 = <OtherParameters.ModbusRegisterFormat1: (0x16d3, 1)>
- ModbusRegisterFormat10 = <OtherParameters.ModbusRegisterFormat10: (0x16dc, 1)>
- ModbusRegisterFormat2 = <OtherParameters.ModbusRegisterFormat2: (0x16d4, 1)>
- ModbusRegisterFormat3 = <OtherParameters.ModbusRegisterFormat3: (0x16d5, 1)>
- ModbusRegisterFormat4 = <OtherParameters.ModbusRegisterFormat4: (0x16d6, 1)>
- ModbusRegisterFormat5 = <OtherParameters.ModbusRegisterFormat5: (0x16d7, 1)>
- ModbusRegisterFormat6 = <OtherParameters.ModbusRegisterFormat6: (0x16d8, 1)>
- ModbusRegisterFormat7 = <OtherParameters.ModbusRegisterFormat7: (0x16d9, 1)>
- ModbusRegisterFormat8 = <OtherParameters.ModbusRegisterFormat8: (0x16da, 1)>
- ModbusRegisterFormat9 = <OtherParameters.ModbusRegisterFormat9: (0x16db, 1)>
- ModbusRegisterScaling1 = <OtherParameters.ModbusRegisterScaling1: (0x16dd, 1)>
- ModbusRegisterScaling10 = <OtherParameters.ModbusRegisterScaling10: (0x16e6, 1)>
- ModbusRegisterScaling2 = <OtherParameters.ModbusRegisterScaling2: (0x16de, 1)>
- ModbusRegisterScaling3 = <OtherParameters.ModbusRegisterScaling3: (0x16df, 1)>
- ModbusRegisterScaling4 = <OtherParameters.ModbusRegisterScaling4: (0x16e0, 1)>
- ModbusRegisterScaling5 = <OtherParameters.ModbusRegisterScaling5: (0x16e1, 1)>
- ModbusRegisterScaling6 = <OtherParameters.ModbusRegisterScaling6: (0x16e2, 1)>
- ModbusRegisterScaling7 = <OtherParameters.ModbusRegisterScaling7: (0x16e3, 1)>
- ModbusRegisterScaling8 = <OtherParameters.ModbusRegisterScaling8: (0x16e4, 1)>
- ModbusRegisterScaling9 = <OtherParameters.ModbusRegisterScaling9: (0x16e5, 1)>
- MultiStepPositionCommand0 = <OtherParameters.MultiStepPositionCommand0: (0x163e, 2)>
- MultiStepPositionCommand1 = <OtherParameters.MultiStepPositionCommand1: (0x1640, 2)>
- MultiStepPositionCommand2 = <OtherParameters.MultiStepPositionCommand2: (0x1642, 2)>
- MultiStepPositionCommand3 = <OtherParameters.MultiStepPositionCommand3: (0x1644, 2)>
- MultiStepPositionCommand4 = <OtherParameters.MultiStepPositionCommand4: (0x1646, 2)>
- MultiStepPositionCommand5 = <OtherParameters.MultiStepPositionCommand5: (0x1648, 2)>
- MultiStepPositionCommand6 = <OtherParameters.MultiStepPositionCommand6: (0x164a, 2)>
- MultiStepPositionCommand7 = <OtherParameters.MultiStepPositionCommand7: (0x164c, 2)>
- NetworkCommunicationWatchdogTimer = <OtherParameters.NetworkCommunicationWatchdogTimer: (0x162e, 1)>
- OperationSelectionAtOption1Error = <OtherParameters.OperationSelectionAtOption1Error: (0x1601, 1)>
- OperationSettingInIdleMode = <OtherParameters.OperationSettingInIdleMode: (0x1632, 1)>
- OptionIFCommandReadRegister1 = <OtherParameters.OptionIFCommandReadRegister1: (0x16ac, 1)>
- OptionIFCommandReadRegister10 = <OtherParameters.OptionIFCommandReadRegister10: (0x16b5, 1)>
- OptionIFCommandReadRegister2 = <OtherParameters.OptionIFCommandReadRegister2: (0x16ad, 1)>
- OptionIFCommandReadRegister3 = <OtherParameters.OptionIFCommandReadRegister3: (0x16ae, 1)>
- OptionIFCommandReadRegister4 = <OtherParameters.OptionIFCommandReadRegister4: (0x16af, 1)>
- OptionIFCommandReadRegister5 = <OtherParameters.OptionIFCommandReadRegister5: (0x16b0, 1)>
- OptionIFCommandReadRegister6 = <OtherParameters.OptionIFCommandReadRegister6: (0x16b1, 1)>
- OptionIFCommandReadRegister7 = <OtherParameters.OptionIFCommandReadRegister7: (0x16b2, 1)>
- OptionIFCommandReadRegister8 = <OtherParameters.OptionIFCommandReadRegister8: (0x16b3, 1)>
- OptionIFCommandReadRegister9 = <OtherParameters.OptionIFCommandReadRegister9: (0x16b4, 1)>
- OptionIFCommandWriteRegister1 = <OtherParameters.OptionIFCommandWriteRegister1: (0x16a2, 1)>
- OptionIFCommandWriteRegister10 = <OtherParameters.OptionIFCommandWriteRegister10: (0x16ab, 1)>
- OptionIFCommandWriteRegister2 = <OtherParameters.OptionIFCommandWriteRegister2: (0x16a3, 1)>
- OptionIFCommandWriteRegister3 = <OtherParameters.OptionIFCommandWriteRegister3: (0x16a4, 1)>
- OptionIFCommandWriteRegister4 = <OtherParameters.OptionIFCommandWriteRegister4: (0x16a5, 1)>
- OptionIFCommandWriteRegister5 = <OtherParameters.OptionIFCommandWriteRegister5: (0x16a6, 1)>
- OptionIFCommandWriteRegister6 = <OtherParameters.OptionIFCommandWriteRegister6: (0x16a7, 1)>
- OptionIFCommandWriteRegister7 = <OtherParameters.OptionIFCommandWriteRegister7: (0x16a8, 1)>
- OptionIFCommandWriteRegister8 = <OtherParameters.OptionIFCommandWriteRegister8: (0x16a9, 1)>
- OptionIFCommandWriteRegister9 = <OtherParameters.OptionIFCommandWriteRegister9: (0x16aa, 1)>
- OverSpeedErrorDetectionLevel = <OtherParameters.OverSpeedErrorDetectionLevel: (0x161a, 1)>
- PolaritySettingForRotationSpeed = <OtherParameters.PolaritySettingForRotationSpeed: (0x1633, 1)>
- PositionRestartRange = <OtherParameters.PositionRestartRange: (0x165c, 1)>
- PositioningMode = <OtherParameters.PositioningMode: (0x1657, 1)>
- PositioningRange = <OtherParameters.PositioningRange: (0x1611, 1)>
- PresetPosition = <OtherParameters.PresetPosition: (0x1660, 1)>
- ProfibusClearMode = <OtherParameters.ProfibusClearMode: (0x16b7, 1)>
- ProfibusMapSelection = <OtherParameters.ProfibusMapSelection: (0x16b8, 1)>
- ProfibusNodeAddress = <OtherParameters.ProfibusNodeAddress: (0x16b6, 1)>
- PulseInputLowerCut = <OtherParameters.PulseInputLowerCut: (0x163d, 1)>
- PulseTrainFrequencyBiasAmount = <OtherParameters.PulseTrainFrequencyBiasAmount: (0x163b, 1)>
- PulseTrainFrequencyFilterTimeConstant = <OtherParameters.PulseTrainFrequencyFilterTimeConstant: (0x163a, 1)>
- PulseTrainFrequencyLimit = <OtherParameters.PulseTrainFrequencyLimit: (0x163c, 1)>
- PulseTrainFrequencyScale = <OtherParameters.PulseTrainFrequencyScale: (0x1639, 1)>
- PulseTrainInputModeForFeedback = <OtherParameters.PulseTrainInputModeForFeedback: (0x1604, 1)>
- ReversePositionRangeSpecification = <OtherParameters.ReversePositionRangeSpecification: (0x1654, 2)>
- ReverseTorqueControlSpeedLimitValue = <OtherParameters.ReverseTorqueControlSpeedLimitValue: (0x1629, 2)>
- SavePositionAtPowerOff = <OtherParameters.SavePositionAtPowerOff: (0x165d, 1)>
- SerialCommunicationMode = <OtherParameters.SerialCommunicationMode: (0x16c8, 1)>
- SimplePositioning = <OtherParameters.SimplePositioning: (0x160c, 1)>
- SpeedDeviationErrorDetectionLevel = <OtherParameters.SpeedDeviationErrorDetectionLevel: (0x161b, 1)>
- SpeedTorqueControlSwitchingTime = <OtherParameters.SpeedTorqueControlSwitchingTime: (0x162b, 1)>
- TorqueBiasMode = <OtherParameters.TorqueBiasMode: (0x1624, 1)>
- TorqueBiasPolaritySelection = <OtherParameters.TorqueBiasPolaritySelection: (0x1626, 1)>
- TorqueBiasValue = <OtherParameters.TorqueBiasValue: (0x1625, 1)>
- TorqueReferenceInputSelection = <OtherParameters.TorqueReferenceInputSelection: (0x1621, 1)>
- TorqueReferenceSetting = <OtherParameters.TorqueReferenceSetting: (0x1622, 1)>
- ZeroReturnDirection = <OtherParameters.ZeroReturnDirection: (0x164f, 1)>
- ZeroReturnMode = <OtherParameters.ZeroReturnMode: (0x164e, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class IntelligentTerminalFunctions(Register) |
| |
IntelligentTerminalFunctions(value, names=None, *, module=None, qualname=None, type=None, start=1)
Intelligent terminal function group. See datasheet
sections 3-7 (pp. 153-171) and B-4 (pp. 332-336).
|
| |
- Method resolution order:
- IntelligentTerminalFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AMBias = <IntelligentTerminalFunctions.AMBias: (0x1471, 1)>
- AMGain = <IntelligentTerminalFunctions.AMGain: (0x146e, 1)>
- AMTerminalFunction = <IntelligentTerminalFunctions.AMTerminalFunction: (0x141c, 1)>
- BaudRate = <IntelligentTerminalFunctions.BaudRate: (0x144b, 1)>
- CommunicationErrorEffect = <IntelligentTerminalFunctions.CommunicationErrorEffect: (0x1450, 1)>
- CommunicationErrorTimeout = <IntelligentTerminalFunctions.CommunicationErrorTimeout: (0x1451, 1)>
- CommunicationParity = <IntelligentTerminalFunctions.CommunicationParity: (0x144e, 1)>
- CommunicationSelection = <IntelligentTerminalFunctions.CommunicationSelection: (0x1464, 1)>
- CommunicationStopBits = <IntelligentTerminalFunctions.CommunicationStopBits: (0x144f, 1)>
- CommunicationWaitTime = <IntelligentTerminalFunctions.CommunicationWaitTime: (0x1452, 1)>
- CurrentMonitorReferenceValue = <IntelligentTerminalFunctions.CurrentMonitorReferenceValue: (0x141e, 1)>
- DebugMode = <IntelligentTerminalFunctions.DebugMode: (0x145f, 1)>
- DeviceID = <IntelligentTerminalFunctions.DeviceID: (0x144c, 1)>
- EOGain = <IntelligentTerminalFunctions.EOGain: (0x146d, 1)>
- EOOutputPulseTrainScaleConversion = <IntelligentTerminalFunctions.EOOutputPulseTrainScaleConversion: (0x1433, 1)>
- EOTerminalFunction = <IntelligentTerminalFunctions.EOTerminalFunction: (0x141b, 1)>
- EzCOMMasterEndAddress = <IntelligentTerminalFunctions.EzCOMMasterEndAddress: (0x1467, 1)>
- EzCOMMasterStartAddress = <IntelligentTerminalFunctions.EzCOMMasterStartAddress: (0x1466, 1)>
- EzCOMStartingTrigger = <IntelligentTerminalFunctions.EzCOMStartingTrigger: (0x1468, 1)>
- FinOverheatWarningLevel = <IntelligentTerminalFunctions.FinOverheatWarningLevel: (0x1444, 1)>
- ForwardPowerRunningOvertorqueLevel = <IntelligentTerminalFunctions.ForwardPowerRunningOvertorqueLevel: (0x143b, 1)>
- ForwardRegenerationOvertorqueLevel = <IntelligentTerminalFunctions.ForwardRegenerationOvertorqueLevel: (0x143e, 1)>
- InputTerminalResponseTime1 = <IntelligentTerminalFunctions.InputTerminalResponseTime1: (0x14a4, 1)>
- InputTerminalResponseTime2 = <IntelligentTerminalFunctions.InputTerminalResponseTime2: (0x14a5, 1)>
- InputTerminalResponseTime3 = <IntelligentTerminalFunctions.InputTerminalResponseTime3: (0x14a6, 1)>
- InputTerminalResponseTime4 = <IntelligentTerminalFunctions.InputTerminalResponseTime4: (0x14a7, 1)>
- InputTerminalResponseTime5 = <IntelligentTerminalFunctions.InputTerminalResponseTime5: (0x14a8, 1)>
- InputTerminalResponseTime6 = <IntelligentTerminalFunctions.InputTerminalResponseTime6: (0x14a9, 1)>
- InputTerminalResponseTime7 = <IntelligentTerminalFunctions.InputTerminalResponseTime7: (0x14aa, 1)>
- LightLoadDetectionLevel = <IntelligentTerminalFunctions.LightLoadDetectionLevel: (0x1427, 1)>
- LightLoadSignalOutputMode = <IntelligentTerminalFunctions.LightLoadSignalOutputMode: (0x1426, 1)>
- LogicOutputSignal1OperatorSelection = <IntelligentTerminalFunctions.LogicOutputSignal1OperatorSelection: (0x1494, 1)>
- LogicOutputSignal1Selection1 = <IntelligentTerminalFunctions.LogicOutputSignal1Selection1: (0x1492, 1)>
- LogicOutputSignal1Selection2 = <IntelligentTerminalFunctions.LogicOutputSignal1Selection2: (0x1493, 1)>
- LogicOutputSignal2OperatorSelection = <IntelligentTerminalFunctions.LogicOutputSignal2OperatorSelection: (0x1497, 1)>
- LogicOutputSignal2Selection1 = <IntelligentTerminalFunctions.LogicOutputSignal2Selection1: (0x1495, 1)>
- LogicOutputSignal2Selection2 = <IntelligentTerminalFunctions.LogicOutputSignal2Selection2: (0x1496, 1)>
- LogicOutputSignal3OperatorSelection = <IntelligentTerminalFunctions.LogicOutputSignal3OperatorSelection: (0x149a, 1)>
- LogicOutputSignal3Selection1 = <IntelligentTerminalFunctions.LogicOutputSignal3Selection1: (0x1498, 1)>
- LogicOutputSignal3Selection2 = <IntelligentTerminalFunctions.LogicOutputSignal3Selection2: (0x1499, 1)>
- MultiFunctionInput1Function = <IntelligentTerminalFunctions.MultiFunctionInput1Function: (0x1401, 1)>
- MultiFunctionInput1Type = <IntelligentTerminalFunctions.MultiFunctionInput1Type: (0x140b, 1)>
- MultiFunctionInput2Function = <IntelligentTerminalFunctions.MultiFunctionInput2Function: (0x1402, 1)>
- MultiFunctionInput2Type = <IntelligentTerminalFunctions.MultiFunctionInput2Type: (0x140c, 1)>
- MultiFunctionInput3Function = <IntelligentTerminalFunctions.MultiFunctionInput3Function: (0x1403, 1)>
- MultiFunctionInput3Type = <IntelligentTerminalFunctions.MultiFunctionInput3Type: (0x140d, 1)>
- MultiFunctionInput4Function = <IntelligentTerminalFunctions.MultiFunctionInput4Function: (0x1404, 1)>
- MultiFunctionInput4Type = <IntelligentTerminalFunctions.MultiFunctionInput4Type: (0x140e, 1)>
- MultiFunctionInput5Function = <IntelligentTerminalFunctions.MultiFunctionInput5Function: (0x1405, 1)>
- MultiFunctionInput5Type = <IntelligentTerminalFunctions.MultiFunctionInput5Type: (0x140f, 1)>
- MultiFunctionInput6Function = <IntelligentTerminalFunctions.MultiFunctionInput6Function: (0x1406, 1)>
- MultiFunctionInput6Type = <IntelligentTerminalFunctions.MultiFunctionInput6Type: (0x1410, 1)>
- MultiFunctionInput7Function = <IntelligentTerminalFunctions.MultiFunctionInput7Function: (0x1407, 1)>
- MultiFunctionInput7Type = <IntelligentTerminalFunctions.MultiFunctionInput7Type: (0x1411, 1)>
- MultiFunctionOutput11Function = <IntelligentTerminalFunctions.MultiFunctionOutput11Function: (0x1415, 1)>
- MultiFunctionOutput11Type = <IntelligentTerminalFunctions.MultiFunctionOutput11Type: (0x141f, 1)>
- MultiFunctionOutput12Function = <IntelligentTerminalFunctions.MultiFunctionOutput12Function: (0x1416, 1)>
- MultiFunctionOutput12Type = <IntelligentTerminalFunctions.MultiFunctionOutput12Type: (0x1420, 1)>
- MultiStepSpeedPositionDeterminationTime = <IntelligentTerminalFunctions.MultiStepSpeedPositionDeterminationTime: (0x14ad, 1)>
- OAdjustment = <IntelligentTerminalFunctions.OAdjustment: (0x1455, 1)>
- OIAdjustment = <IntelligentTerminalFunctions.OIAdjustment: (0x1456, 1)>
- Output11OffDelay = <IntelligentTerminalFunctions.Output11OffDelay: (0x1487, 1)>
- Output11OnDelay = <IntelligentTerminalFunctions.Output11OnDelay: (0x1486, 1)>
- Output12OffDelay = <IntelligentTerminalFunctions.Output12OffDelay: (0x1489, 1)>
- Output12OnDelay = <IntelligentTerminalFunctions.Output12OnDelay: (0x1488, 1)>
- OverloadWarningLevel = <IntelligentTerminalFunctions.OverloadWarningLevel: (0x1429, 1)>
- OverloadWarningLevel2 = <IntelligentTerminalFunctions.OverloadWarningLevel2: (0x1473, 1)>
- OverloadWarningSignalOutputMode = <IntelligentTerminalFunctions.OverloadWarningSignalOutputMode: (0x1428, 1)>
- PIDDeviationExcessiveLevel = <IntelligentTerminalFunctions.PIDDeviationExcessiveLevel: (0x142e, 1)>
- PIDFeedbackLowerLimit = <IntelligentTerminalFunctions.PIDFeedbackLowerLimit: (0x1439, 1)>
- PIDFeedbackUpperLimit = <IntelligentTerminalFunctions.PIDFeedbackUpperLimit: (0x1438, 1)>
- RelayOutputFunction = <IntelligentTerminalFunctions.RelayOutputFunction: (0x141a, 1)>
- RelayOutputOffDelay = <IntelligentTerminalFunctions.RelayOutputOffDelay: (0x1491, 1)>
- RelayOutputOnDelay = <IntelligentTerminalFunctions.RelayOutputOnDelay: (0x1490, 1)>
- RelayOutputType = <IntelligentTerminalFunctions.RelayOutputType: (0x1424, 1)>
- ResetButtonSetting = <IntelligentTerminalFunctions.ResetButtonSetting: (0x146a, 1)>
- RestartFrequencyMatchingSelection = <IntelligentTerminalFunctions.RestartFrequencyMatchingSelection: (0x146b, 1)>
- ReversePowerRunningOvertorqueLevel = <IntelligentTerminalFunctions.ReversePowerRunningOvertorqueLevel: (0x143d, 1)>
- ReverseRegenerationOvertorqueLevel = <IntelligentTerminalFunctions.ReverseRegenerationOvertorqueLevel: (0x143c, 1)>
- TargetFrequencyDuringAcceleration = <IntelligentTerminalFunctions.TargetFrequencyDuringAcceleration: (0x142a, 2)>
- TargetFrequencyDuringAcceleration2 = <IntelligentTerminalFunctions.TargetFrequencyDuringAcceleration2: (0x142f, 2)>
- TargetFrequencyDuringDeceleration = <IntelligentTerminalFunctions.TargetFrequencyDuringDeceleration: (0x142c, 2)>
- TargetFrequencyDuringDeceleration2 = <IntelligentTerminalFunctions.TargetFrequencyDuringDeceleration2: (0x1431, 2)>
- ThermalWarningLevel = <IntelligentTerminalFunctions.ThermalWarningLevel: (0x1441, 1)>
- ThermistorAdjustment = <IntelligentTerminalFunctions.ThermistorAdjustment: (0x1459, 1)>
- TorqueModeSelection = <IntelligentTerminalFunctions.TorqueModeSelection: (0x143a, 1)>
- TorqueSignalOutputMode = <IntelligentTerminalFunctions.TorqueSignalOutputMode: (0x143f, 1)>
- UpDownButtonClearMode = <IntelligentTerminalFunctions.UpDownButtonClearMode: (0x146c, 1)>
- UpDownButtonSetting = <IntelligentTerminalFunctions.UpDownButtonSetting: (0x1469, 1)>
- ZeroHzDetectionLevel = <IntelligentTerminalFunctions.ZeroHzDetectionLevel: (0x1443, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class InverterStatus(enum.IntEnum) |
| |
InverterStatus(value, names=None, *, module=None, qualname=None, type=None, start=1)
Codes identifying the status of the inverter
(datasheet section B-4 p. 421).
|
| |
- Method resolution order:
- InverterStatus
- enum.IntEnum
- builtins.int
- enum.Enum
- builtins.object
Data and other attributes defined here:
- Accelerating = <InverterStatus.Accelerating: 4>
- ConstantSpeedOperation = <InverterStatus.ConstantSpeedOperation: 3>
- DCBreaking = <InverterStatus.DCBreaking: 7>
- Decelerating = <InverterStatus.Decelerating: 2>
- OperatingAtZeroFrequency = <InverterStatus.OperatingAtZeroFrequency: 5>
- OverloadRestricted = <InverterStatus.OverloadRestricted: 8>
- Resetting = <InverterStatus.Resetting: 0>
- Starting = <InverterStatus.Starting: 6>
- Stopping = <InverterStatus.Stopping: 1>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class MainProfileParameters(Register) |
| |
MainProfileParameters(value, names=None, *, module=None, qualname=None, type=None, start=1)
Main profile parameters group. See datasheet
sections 3-4 (p. 89) and B-4 (pp. 319-320, 322-323 and 344).
|
| |
- Method resolution order:
- MainProfileParameters
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AccelerationTime1 = <MainProfileParameters.AccelerationTime1: (0x1103, 2)>
- DecelerationTime1 = <MainProfileParameters.DecelerationTime1: (0x1105, 2)>
- OperatorRotationDirection = <MainProfileParameters.OperatorRotationDirection: (0x1107, 1)>
- OutputFrequency = <MainProfileParameters.OutputFrequency: (0x01, 2)>
- SecondAccelerationTime1 = <MainProfileParameters.SecondAccelerationTime1: (0x2103, 2)>
- SecondDecelerationTime1 = <MainProfileParameters.SecondDecelerationTime1: (0x2105, 2)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class ModbusRegisters(Register) |
| |
ModbusRegisters(value, names=None, *, module=None, qualname=None, type=None, start=1)
Modbus-only registers. These registers aren't accessible
through the keypad interface (datasheet section B-4, pp. 318 and 320).
|
| |
- Method resolution order:
- ModbusRegisters
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- EEPROMWriteMode = <ModbusRegisters.EEPROMWriteMode: (0x902, 1)>
- InverterStatusA = <ModbusRegisters.InverterStatusA: (0x03, 1)>
- InverterStatusB = <ModbusRegisters.InverterStatusB: (0x04, 1)>
- InverterStatusC = <ModbusRegisters.InverterStatusC: (0x05, 1)>
- PIDFeedback = <ModbusRegisters.PIDFeedback: (0x06, 1)>
- WriteToEEPROM = <ModbusRegisters.WriteToEEPROM: (0x900, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class MonitoringFunctions(Register) |
| |
MonitoringFunctions(value, names=None, *, module=None, qualname=None, type=None, start=1)
Intelligent terminal function group. See datasheet
sections 3-3 (pp. 74-88) and B-4 (pp. 319-320 and 322-323).
|
| |
- Method resolution order:
- MonitoringFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AnalogInputO = <MonitoringFunctions.AnalogInputO: (0x10a1, 1)>
- AnalogInputOI = <MonitoringFunctions.AnalogInputOI: (0x10a2, 1)>
- ConvertedOutputFrequency = <MonitoringFunctions.ConvertedOutputFrequency: (0x1009, 2)>
- CurrentPosition = <MonitoringFunctions.CurrentPosition: (0x1038, 2)>
- DCVoltage = <MonitoringFunctions.DCVoltage: (0x1026, 1)>
- DriveProgramming0 = <MonitoringFunctions.DriveProgramming0: (0x102e, 2)>
- DriveProgramming1 = <MonitoringFunctions.DriveProgramming1: (0x1030, 2)>
- DriveProgramming2 = <MonitoringFunctions.DriveProgramming2: (0x1032, 2)>
- ElectronicThermalMonitor = <MonitoringFunctions.ElectronicThermalMonitor: (0x1028, 1)>
- FaultFrequencyMonitor = <MonitoringFunctions.FaultFrequencyMonitor: (0x11, 1)>
- FaultMonitor1 = <MonitoringFunctions.FaultMonitor1: (0x12, 1)>
- FaultMonitor1Current = <MonitoringFunctions.FaultMonitor1Current: (0x16, 1)>
- FaultMonitor1Frequency = <MonitoringFunctions.FaultMonitor1Frequency: (0x14, 2)>
- FaultMonitor1InverterStatus = <MonitoringFunctions.FaultMonitor1InverterStatus: (0x13, 1)>
- FaultMonitor1PowerOnTime = <MonitoringFunctions.FaultMonitor1PowerOnTime: (0x1a, 2)>
- FaultMonitor1RunningTime = <MonitoringFunctions.FaultMonitor1RunningTime: (0x18, 2)>
- FaultMonitor1Voltage = <MonitoringFunctions.FaultMonitor1Voltage: (0x17, 1)>
- FaultMonitor2 = <MonitoringFunctions.FaultMonitor2: (0x1c, 1)>
- FaultMonitor2Current = <MonitoringFunctions.FaultMonitor2Current: (0x20, 1)>
- FaultMonitor2Frequency = <MonitoringFunctions.FaultMonitor2Frequency: (0x1e, 2)>
- FaultMonitor2InverterStatus = <MonitoringFunctions.FaultMonitor2InverterStatus: (0x1d, 1)>
- FaultMonitor2PowerOnTime = <MonitoringFunctions.FaultMonitor2PowerOnTime: (0x24, 2)>
- FaultMonitor2RunningTime = <MonitoringFunctions.FaultMonitor2RunningTime: (0x22, 2)>
- FaultMonitor2Voltage = <MonitoringFunctions.FaultMonitor2Voltage: (0x21, 1)>
- FaultMonitor3 = <MonitoringFunctions.FaultMonitor3: (0x26, 1)>
- FaultMonitor3Current = <MonitoringFunctions.FaultMonitor3Current: (0x2a, 1)>
- FaultMonitor3Frequency = <MonitoringFunctions.FaultMonitor3Frequency: (0x28, 2)>
- FaultMonitor3InverterStatus = <MonitoringFunctions.FaultMonitor3InverterStatus: (0x27, 1)>
- FaultMonitor3PowerOnTime = <MonitoringFunctions.FaultMonitor3PowerOnTime: (0x2e, 2)>
- FaultMonitor3RunningTime = <MonitoringFunctions.FaultMonitor3RunningTime: (0x2c, 2)>
- FaultMonitor3Voltage = <MonitoringFunctions.FaultMonitor3Voltage: (0x2b, 1)>
- FaultMonitor4 = <MonitoringFunctions.FaultMonitor4: (0x30, 1)>
- FaultMonitor4Current = <MonitoringFunctions.FaultMonitor4Current: (0x34, 1)>
- FaultMonitor4Frequency = <MonitoringFunctions.FaultMonitor4Frequency: (0x32, 2)>
- FaultMonitor4InverterStatus = <MonitoringFunctions.FaultMonitor4InverterStatus: (0x31, 1)>
- FaultMonitor4PowerOnTime = <MonitoringFunctions.FaultMonitor4PowerOnTime: (0x38, 2)>
- FaultMonitor4RunningTime = <MonitoringFunctions.FaultMonitor4RunningTime: (0x36, 2)>
- FaultMonitor4Voltage = <MonitoringFunctions.FaultMonitor4Voltage: (0x35, 1)>
- FaultMonitor5 = <MonitoringFunctions.FaultMonitor5: (0x3a, 1)>
- FaultMonitor5Current = <MonitoringFunctions.FaultMonitor5Current: (0x3e, 1)>
- FaultMonitor5Frequency = <MonitoringFunctions.FaultMonitor5Frequency: (0x3c, 2)>
- FaultMonitor5InverterStatus = <MonitoringFunctions.FaultMonitor5InverterStatus: (0x3b, 1)>
- FaultMonitor5PowerOnTime = <MonitoringFunctions.FaultMonitor5PowerOnTime: (0x42, 2)>
- FaultMonitor5RunningTime = <MonitoringFunctions.FaultMonitor5RunningTime: (0x40, 2)>
- FaultMonitor5Voltage = <MonitoringFunctions.FaultMonitor5Voltage: (0x3f, 1)>
- FaultMonitor6 = <MonitoringFunctions.FaultMonitor6: (0x44, 1)>
- FaultMonitor6Current = <MonitoringFunctions.FaultMonitor6Current: (0x48, 1)>
- FaultMonitor6Frequency = <MonitoringFunctions.FaultMonitor6Frequency: (0x46, 2)>
- FaultMonitor6InverterStatus = <MonitoringFunctions.FaultMonitor6InverterStatus: (0x45, 1)>
- FaultMonitor6PowerOnTime = <MonitoringFunctions.FaultMonitor6PowerOnTime: (0x4c, 2)>
- FaultMonitor6RunningTime = <MonitoringFunctions.FaultMonitor6RunningTime: (0x4a, 2)>
- FaultMonitor6Voltage = <MonitoringFunctions.FaultMonitor6Voltage: (0x49, 1)>
- FinTemperature = <MonitoringFunctions.FinTemperature: (0x1019, 1)>
- FrequencySource = <MonitoringFunctions.FrequencySource: (0x1059, 1)>
- InputPower = <MonitoringFunctions.InputPower: (0x1012, 1)>
- InverterMode = <MonitoringFunctions.InverterMode: (0x1057, 1)>
- LifeAssessment = <MonitoringFunctions.LifeAssessment: (0x101d, 1)>
- MultiFunctionInputs = <MonitoringFunctions.MultiFunctionInputs: (0x1007, 1)>
- MultiFunctionOutputs = <MonitoringFunctions.MultiFunctionOutputs: (0x1008, 1)>
- OutputCurrent = <MonitoringFunctions.OutputCurrent: (0x1003, 1)>
- OutputFrequency = <MonitoringFunctions.OutputFrequency: (0x1001, 2)>
- OutputTorque = <MonitoringFunctions.OutputTorque: (0x1010, 1)>
- OutputVoltage = <MonitoringFunctions.OutputVoltage: (0x1011, 1)>
- PIDDeviation = <MonitoringFunctions.PIDDeviation: (0x10a6, 1)>
- PIDFeedbackValue = <MonitoringFunctions.PIDFeedbackValue: (0x1005, 2)>
- PIDOutput = <MonitoringFunctions.PIDOutput: (0x10a8, 1)>
- PositionCommand = <MonitoringFunctions.PositionCommand: (0x1036, 2)>
- PowerOnTime = <MonitoringFunctions.PowerOnTime: (0x1017, 2)>
- ProgramCounter = <MonitoringFunctions.ProgramCounter: (0x101e, 1)>
- ProgramNumber = <MonitoringFunctions.ProgramNumber: (0x101f, 1)>
- PulseTrainInput = <MonitoringFunctions.PulseTrainInput: (0x10a4, 1)>
- RealFrequency = <MonitoringFunctions.RealFrequency: (0x100b, 2)>
- RegenerativeBrakingLoadRate = <MonitoringFunctions.RegenerativeBrakingLoadRate: (0x1027, 1)>
- RotationDirection = <MonitoringFunctions.RotationDirection: (0x1004, 1)>
- RunSource = <MonitoringFunctions.RunSource: (0x105a, 1)>
- TorqueBias = <MonitoringFunctions.TorqueBias: (0x100e, 1)>
- TorqueReference = <MonitoringFunctions.TorqueReference: (0x100d, 1)>
- TotalRunTime = <MonitoringFunctions.TotalRunTime: (0x1015, 2)>
- WarningMonitor = <MonitoringFunctions.WarningMonitor: (0x4e, 1)>
- WattHour = <MonitoringFunctions.WattHour: (0x1013, 2)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class MotorConstantsFunctions(Register) |
| |
MotorConstantsFunctions(value, names=None, *, module=None, qualname=None, type=None, start=1)
Motor constants function group. See datasheet
sections 3-8 (pp. 172-178) and B-4 (pp. 337-338).
|
| |
- Method resolution order:
- MotorConstantsFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AutoTuningPMParameterLd = <MotorConstantsFunctions.AutoTuningPMParameterLd: (0x157c, 1)>
- AutoTuningPMParameterLq = <MotorConstantsFunctions.AutoTuningPMParameterLq: (0x157d, 1)>
- AutoTuningPMParameterR = <MotorConstantsFunctions.AutoTuningPMParameterR: (0x157b, 1)>
- AutoTuningParameterIo = <MotorConstantsFunctions.AutoTuningParameterIo: (0x152b, 1)>
- AutoTuningParameterJ = <MotorConstantsFunctions.AutoTuningParameterJ: (0x152c, 2)>
- AutoTuningParameterR1 = <MotorConstantsFunctions.AutoTuningParameterR1: (0x1525, 1)>
- AutoTuningParameterR2 = <MotorConstantsFunctions.AutoTuningParameterR2: (0x1527, 1)>
- AutoTuningSelection = <MotorConstantsFunctions.AutoTuningSelection: (0x1501, 1)>
- H022 = <MotorConstantsFunctions.H022: (0x151a, 1)>
- H032 = <MotorConstantsFunctions.H032: (0x1529, 1)>
- MotorCapacitySelection = <MotorConstantsFunctions.MotorCapacitySelection: (0x1503, 1)>
- MotorParameterIo = <MotorConstantsFunctions.MotorParameterIo: (0x151c, 1)>
- MotorParameterJ = <MotorConstantsFunctions.MotorParameterJ: (0x151d, 2)>
- MotorParameterR1 = <MotorConstantsFunctions.MotorParameterR1: (0x1516, 1)>
- MotorParameterR2 = <MotorConstantsFunctions.MotorParameterR2: (0x1518, 1)>
- MotorParameterSelection = <MotorConstantsFunctions.MotorParameterSelection: (0x1502, 1)>
- MotorPoleNumberSelection = <MotorConstantsFunctions.MotorPoleNumberSelection: (0x1504, 1)>
- PMIMPE0VWait = <MotorConstantsFunctions.PMIMPE0VWait: (0x158a, 1)>
- PMIMPEDetect = <MotorConstantsFunctions.PMIMPEDetect: (0x158c, 1)>
- PMIMPEDetectWait = <MotorConstantsFunctions.PMIMPEDetectWait: (0x158b, 1)>
- PMIMPEVoltageGain = <MotorConstantsFunctions.PMIMPEVoltageGain: (0x158d, 1)>
- PMMinimumFrequency = <MotorConstantsFunctions.PMMinimumFrequency: (0x1586, 1)>
- PMMotorCapacity = <MotorConstantsFunctions.PMMotorCapacity: (0x1572, 1)>
- PMMotorCodeSelection = <MotorConstantsFunctions.PMMotorCodeSelection: (0x1571, 1)>
- PMMotorPoleNumberSelection = <MotorConstantsFunctions.PMMotorPoleNumberSelection: (0x1573, 1)>
- PMNoLoadCurrent = <MotorConstantsFunctions.PMNoLoadCurrent: (0x1587, 1)>
- PMParameterJ = <MotorConstantsFunctions.PMParameterJ: (0x1579, 2)>
- PMParameterKe = <MotorConstantsFunctions.PMParameterKe: (0x1578, 1)>
- PMParameterLd = <MotorConstantsFunctions.PMParameterLd: (0x1576, 1)>
- PMParameterLq = <MotorConstantsFunctions.PMParameterLq: (0x1577, 1)>
- PMParameterR = <MotorConstantsFunctions.PMParameterR: (0x1575, 1)>
- PMRatedCurrent = <MotorConstantsFunctions.PMRatedCurrent: (0x1574, 1)>
- PMSpeedResponse = <MotorConstantsFunctions.PMSpeedResponse: (0x1581, 1)>
- PMStabilizationConstant = <MotorConstantsFunctions.PMStabilizationConstant: (0x1584, 1)>
- PMStartingCurrent = <MotorConstantsFunctions.PMStartingCurrent: (0x1582, 1)>
- PMStartingMethod = <MotorConstantsFunctions.PMStartingMethod: (0x1588, 1)>
- PMStartingTime = <MotorConstantsFunctions.PMStartingTime: (0x1583, 1)>
- SlipCompensationIGain = <MotorConstantsFunctions.SlipCompensationIGain: (0x153e, 1)>
- SlipCompensationPGain = <MotorConstantsFunctions.SlipCompensationPGain: (0x153d, 1)>
- SpeedResponse = <MotorConstantsFunctions.SpeedResponse: (0x1506, 1)>
- StabilizationParameter = <MotorConstantsFunctions.StabilizationParameter: (0x1507, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class OtherParameters(Register) |
| |
OtherParameters(value, names=None, *, module=None, qualname=None, type=None, start=1)
Other parameters group. See datasheet
sections 3-9 (pp. 179-190) and B-4 (pp. 339-343).
|
| |
- Method resolution order:
- OtherParameters
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AccelerationDecelerationTimeInputType = <OtherParameters.AccelerationDecelerationTimeInputType: (0x161f, 1)>
- CANOpenCommunicationSpeed = <OtherParameters.CANOpenCommunicationSpeed: (0x16bc, 1)>
- CANOpenNodeAddress = <OtherParameters.CANOpenNodeAddress: (0x16bb, 1)>
- CommunicationErrorEffect = <OtherParameters.CommunicationErrorEffect: (0x162f, 1)>
- CompoNetNodeAddress = <OtherParameters.CompoNetNodeAddress: (0x16c0, 1)>
- CreepSpeed = <OtherParameters.CreepSpeed: (0x160f, 1)>
- CurrentPositionAtPowerOff = <OtherParameters.CurrentPositionAtPowerOff: (0x165e, 1)>
- DeviceNetNodeAddress = <OtherParameters.DeviceNetNodeAddress: (0x16c2, 1)>
- DriveProgramParameterU00 = <OtherParameters.DriveProgramParameterU00: (0x1666, 1)>
- DriveProgramParameterU01 = <OtherParameters.DriveProgramParameterU01: (0x1667, 1)>
- DriveProgramParameterU02 = <OtherParameters.DriveProgramParameterU02: (0x1668, 1)>
- DriveProgramParameterU03 = <OtherParameters.DriveProgramParameterU03: (0x1669, 1)>
- DriveProgramParameterU04 = <OtherParameters.DriveProgramParameterU04: (0x166a, 1)>
- DriveProgramParameterU05 = <OtherParameters.DriveProgramParameterU05: (0x166b, 1)>
- DriveProgramParameterU06 = <OtherParameters.DriveProgramParameterU06: (0x166c, 1)>
- DriveProgramParameterU07 = <OtherParameters.DriveProgramParameterU07: (0x166d, 1)>
- DriveProgramParameterU08 = <OtherParameters.DriveProgramParameterU08: (0x166e, 1)>
- DriveProgramParameterU09 = <OtherParameters.DriveProgramParameterU09: (0x166f, 1)>
- DriveProgramParameterU10 = <OtherParameters.DriveProgramParameterU10: (0x1670, 1)>
- DriveProgramParameterU11 = <OtherParameters.DriveProgramParameterU11: (0x1671, 1)>
- DriveProgramParameterU12 = <OtherParameters.DriveProgramParameterU12: (0x1672, 1)>
- DriveProgramParameterU13 = <OtherParameters.DriveProgramParameterU13: (0x1673, 1)>
- DriveProgramParameterU14 = <OtherParameters.DriveProgramParameterU14: (0x1674, 1)>
- DriveProgramParameterU15 = <OtherParameters.DriveProgramParameterU15: (0x1675, 1)>
- DriveProgramParameterU16 = <OtherParameters.DriveProgramParameterU16: (0x1676, 1)>
- DriveProgramParameterU17 = <OtherParameters.DriveProgramParameterU17: (0x1677, 1)>
- DriveProgramParameterU18 = <OtherParameters.DriveProgramParameterU18: (0x1678, 1)>
- DriveProgramParameterU19 = <OtherParameters.DriveProgramParameterU19: (0x1679, 1)>
- DriveProgramParameterU20 = <OtherParameters.DriveProgramParameterU20: (0x167a, 1)>
- DriveProgramParameterU21 = <OtherParameters.DriveProgramParameterU21: (0x167b, 1)>
- DriveProgramParameterU22 = <OtherParameters.DriveProgramParameterU22: (0x167c, 1)>
- DriveProgramParameterU23 = <OtherParameters.DriveProgramParameterU23: (0x167d, 1)>
- DriveProgramParameterU24 = <OtherParameters.DriveProgramParameterU24: (0x167e, 1)>
- DriveProgramParameterU25 = <OtherParameters.DriveProgramParameterU25: (0x167f, 1)>
- DriveProgramParameterU26 = <OtherParameters.DriveProgramParameterU26: (0x1680, 1)>
- DriveProgramParameterU27 = <OtherParameters.DriveProgramParameterU27: (0x1681, 1)>
- DriveProgramParameterU28 = <OtherParameters.DriveProgramParameterU28: (0x1682, 1)>
- DriveProgramParameterU29 = <OtherParameters.DriveProgramParameterU29: (0x1683, 1)>
- DriveProgramParameterU30 = <OtherParameters.DriveProgramParameterU30: (0x1684, 1)>
- DriveProgramParameterU31 = <OtherParameters.DriveProgramParameterU31: (0x1685, 1)>
- EATerminalFunction = <OtherParameters.EATerminalFunction: (0x1603, 1)>
- EZCOMMDestination1Address = <OtherParameters.EZCOMMDestination1Address: (0x168f, 1)>
- EZCOMMDestination1Register = <OtherParameters.EZCOMMDestination1Register: (0x1690, 1)>
- EZCOMMDestination2Address = <OtherParameters.EZCOMMDestination2Address: (0x1692, 1)>
- EZCOMMDestination2Register = <OtherParameters.EZCOMMDestination2Register: (0x1693, 1)>
- EZCOMMDestination3Address = <OtherParameters.EZCOMMDestination3Address: (0x1695, 1)>
- EZCOMMDestination3Register = <OtherParameters.EZCOMMDestination3Register: (0x1696, 1)>
- EZCOMMDestination4Address = <OtherParameters.EZCOMMDestination4Address: (0x1698, 1)>
- EZCOMMDestination4Register = <OtherParameters.EZCOMMDestination4Register: (0x1699, 1)>
- EZCOMMDestination5Address = <OtherParameters.EZCOMMDestination5Address: (0x169b, 1)>
- EZCOMMDestination5Register = <OtherParameters.EZCOMMDestination5Register: (0x169c, 1)>
- EZCOMMSource1Register = <OtherParameters.EZCOMMSource1Register: (0x1691, 1)>
- EZCOMMSource2Register = <OtherParameters.EZCOMMSource2Register: (0x1694, 1)>
- EZCOMMSource3Register = <OtherParameters.EZCOMMSource3Register: (0x1697, 1)>
- EZCOMMSource4Register = <OtherParameters.EZCOMMSource4Register: (0x169a, 1)>
- EZCOMMSource5Register = <OtherParameters.EZCOMMSource5Register: (0x169d, 1)>
- EncoderDisconnectionTimeout = <OtherParameters.EncoderDisconnectionTimeout: (0x1659, 1)>
- EncoderPulses = <OtherParameters.EncoderPulses: (0x160b, 1)>
- Endianness = <OtherParameters.Endianness: (0x16f1, 1)>
- EzCOMMDataCount = <OtherParameters.EzCOMMDataCount: (0x168e, 1)>
- ForwardPositionRangeSpecification = <OtherParameters.ForwardPositionRangeSpecification: (0x1652, 2)>
- ForwardTorqueControlSpeedLimitValue = <OtherParameters.ForwardTorqueControlSpeedLimitValue: (0x1627, 2)>
- HighSpeedZeroReturnFrequency = <OtherParameters.HighSpeedZeroReturnFrequency: (0x1651, 1)>
- InstanceNumber = <OtherParameters.InstanceNumber: (0x1630, 1)>
- LowSpeedZeroReturnFrequency = <OtherParameters.LowSpeedZeroReturnFrequency: (0x1650, 1)>
- ModbusExternalRegister1 = <OtherParameters.ModbusExternalRegister1: (0x16c9, 1)>
- ModbusExternalRegister10 = <OtherParameters.ModbusExternalRegister10: (0x16d2, 1)>
- ModbusExternalRegister2 = <OtherParameters.ModbusExternalRegister2: (0x16ca, 1)>
- ModbusExternalRegister3 = <OtherParameters.ModbusExternalRegister3: (0x16cb, 1)>
- ModbusExternalRegister4 = <OtherParameters.ModbusExternalRegister4: (0x16cc, 1)>
- ModbusExternalRegister5 = <OtherParameters.ModbusExternalRegister5: (0x16cd, 1)>
- ModbusExternalRegister6 = <OtherParameters.ModbusExternalRegister6: (0x16ce, 1)>
- ModbusExternalRegister7 = <OtherParameters.ModbusExternalRegister7: (0x16cf, 1)>
- ModbusExternalRegister8 = <OtherParameters.ModbusExternalRegister8: (0x16d0, 1)>
- ModbusExternalRegister9 = <OtherParameters.ModbusExternalRegister9: (0x16d1, 1)>
- ModbusInternalRegister1 = <OtherParameters.ModbusInternalRegister1: (0x16e7, 1)>
- ModbusInternalRegister10 = <OtherParameters.ModbusInternalRegister10: (0x16f0, 1)>
- ModbusInternalRegister2 = <OtherParameters.ModbusInternalRegister2: (0x16e8, 1)>
- ModbusInternalRegister3 = <OtherParameters.ModbusInternalRegister3: (0x16e9, 1)>
- ModbusInternalRegister4 = <OtherParameters.ModbusInternalRegister4: (0x16ea, 1)>
- ModbusInternalRegister5 = <OtherParameters.ModbusInternalRegister5: (0x16eb, 1)>
- ModbusInternalRegister6 = <OtherParameters.ModbusInternalRegister6: (0x16ec, 1)>
- ModbusInternalRegister7 = <OtherParameters.ModbusInternalRegister7: (0x16ed, 1)>
- ModbusInternalRegister8 = <OtherParameters.ModbusInternalRegister8: (0x16ee, 1)>
- ModbusInternalRegister9 = <OtherParameters.ModbusInternalRegister9: (0x16ef, 1)>
- ModbusRegisterFormat1 = <OtherParameters.ModbusRegisterFormat1: (0x16d3, 1)>
- ModbusRegisterFormat10 = <OtherParameters.ModbusRegisterFormat10: (0x16dc, 1)>
- ModbusRegisterFormat2 = <OtherParameters.ModbusRegisterFormat2: (0x16d4, 1)>
- ModbusRegisterFormat3 = <OtherParameters.ModbusRegisterFormat3: (0x16d5, 1)>
- ModbusRegisterFormat4 = <OtherParameters.ModbusRegisterFormat4: (0x16d6, 1)>
- ModbusRegisterFormat5 = <OtherParameters.ModbusRegisterFormat5: (0x16d7, 1)>
- ModbusRegisterFormat6 = <OtherParameters.ModbusRegisterFormat6: (0x16d8, 1)>
- ModbusRegisterFormat7 = <OtherParameters.ModbusRegisterFormat7: (0x16d9, 1)>
- ModbusRegisterFormat8 = <OtherParameters.ModbusRegisterFormat8: (0x16da, 1)>
- ModbusRegisterFormat9 = <OtherParameters.ModbusRegisterFormat9: (0x16db, 1)>
- ModbusRegisterScaling1 = <OtherParameters.ModbusRegisterScaling1: (0x16dd, 1)>
- ModbusRegisterScaling10 = <OtherParameters.ModbusRegisterScaling10: (0x16e6, 1)>
- ModbusRegisterScaling2 = <OtherParameters.ModbusRegisterScaling2: (0x16de, 1)>
- ModbusRegisterScaling3 = <OtherParameters.ModbusRegisterScaling3: (0x16df, 1)>
- ModbusRegisterScaling4 = <OtherParameters.ModbusRegisterScaling4: (0x16e0, 1)>
- ModbusRegisterScaling5 = <OtherParameters.ModbusRegisterScaling5: (0x16e1, 1)>
- ModbusRegisterScaling6 = <OtherParameters.ModbusRegisterScaling6: (0x16e2, 1)>
- ModbusRegisterScaling7 = <OtherParameters.ModbusRegisterScaling7: (0x16e3, 1)>
- ModbusRegisterScaling8 = <OtherParameters.ModbusRegisterScaling8: (0x16e4, 1)>
- ModbusRegisterScaling9 = <OtherParameters.ModbusRegisterScaling9: (0x16e5, 1)>
- MultiStepPositionCommand0 = <OtherParameters.MultiStepPositionCommand0: (0x163e, 2)>
- MultiStepPositionCommand1 = <OtherParameters.MultiStepPositionCommand1: (0x1640, 2)>
- MultiStepPositionCommand2 = <OtherParameters.MultiStepPositionCommand2: (0x1642, 2)>
- MultiStepPositionCommand3 = <OtherParameters.MultiStepPositionCommand3: (0x1644, 2)>
- MultiStepPositionCommand4 = <OtherParameters.MultiStepPositionCommand4: (0x1646, 2)>
- MultiStepPositionCommand5 = <OtherParameters.MultiStepPositionCommand5: (0x1648, 2)>
- MultiStepPositionCommand6 = <OtherParameters.MultiStepPositionCommand6: (0x164a, 2)>
- MultiStepPositionCommand7 = <OtherParameters.MultiStepPositionCommand7: (0x164c, 2)>
- NetworkCommunicationWatchdogTimer = <OtherParameters.NetworkCommunicationWatchdogTimer: (0x162e, 1)>
- OperationSelectionAtOption1Error = <OtherParameters.OperationSelectionAtOption1Error: (0x1601, 1)>
- OperationSettingInIdleMode = <OtherParameters.OperationSettingInIdleMode: (0x1632, 1)>
- OptionIFCommandReadRegister1 = <OtherParameters.OptionIFCommandReadRegister1: (0x16ac, 1)>
- OptionIFCommandReadRegister10 = <OtherParameters.OptionIFCommandReadRegister10: (0x16b5, 1)>
- OptionIFCommandReadRegister2 = <OtherParameters.OptionIFCommandReadRegister2: (0x16ad, 1)>
- OptionIFCommandReadRegister3 = <OtherParameters.OptionIFCommandReadRegister3: (0x16ae, 1)>
- OptionIFCommandReadRegister4 = <OtherParameters.OptionIFCommandReadRegister4: (0x16af, 1)>
- OptionIFCommandReadRegister5 = <OtherParameters.OptionIFCommandReadRegister5: (0x16b0, 1)>
- OptionIFCommandReadRegister6 = <OtherParameters.OptionIFCommandReadRegister6: (0x16b1, 1)>
- OptionIFCommandReadRegister7 = <OtherParameters.OptionIFCommandReadRegister7: (0x16b2, 1)>
- OptionIFCommandReadRegister8 = <OtherParameters.OptionIFCommandReadRegister8: (0x16b3, 1)>
- OptionIFCommandReadRegister9 = <OtherParameters.OptionIFCommandReadRegister9: (0x16b4, 1)>
- OptionIFCommandWriteRegister1 = <OtherParameters.OptionIFCommandWriteRegister1: (0x16a2, 1)>
- OptionIFCommandWriteRegister10 = <OtherParameters.OptionIFCommandWriteRegister10: (0x16ab, 1)>
- OptionIFCommandWriteRegister2 = <OtherParameters.OptionIFCommandWriteRegister2: (0x16a3, 1)>
- OptionIFCommandWriteRegister3 = <OtherParameters.OptionIFCommandWriteRegister3: (0x16a4, 1)>
- OptionIFCommandWriteRegister4 = <OtherParameters.OptionIFCommandWriteRegister4: (0x16a5, 1)>
- OptionIFCommandWriteRegister5 = <OtherParameters.OptionIFCommandWriteRegister5: (0x16a6, 1)>
- OptionIFCommandWriteRegister6 = <OtherParameters.OptionIFCommandWriteRegister6: (0x16a7, 1)>
- OptionIFCommandWriteRegister7 = <OtherParameters.OptionIFCommandWriteRegister7: (0x16a8, 1)>
- OptionIFCommandWriteRegister8 = <OtherParameters.OptionIFCommandWriteRegister8: (0x16a9, 1)>
- OptionIFCommandWriteRegister9 = <OtherParameters.OptionIFCommandWriteRegister9: (0x16aa, 1)>
- OverSpeedErrorDetectionLevel = <OtherParameters.OverSpeedErrorDetectionLevel: (0x161a, 1)>
- PolaritySettingForRotationSpeed = <OtherParameters.PolaritySettingForRotationSpeed: (0x1633, 1)>
- PositionRestartRange = <OtherParameters.PositionRestartRange: (0x165c, 1)>
- PositioningMode = <OtherParameters.PositioningMode: (0x1657, 1)>
- PositioningRange = <OtherParameters.PositioningRange: (0x1611, 1)>
- PresetPosition = <OtherParameters.PresetPosition: (0x1660, 1)>
- ProfibusClearMode = <OtherParameters.ProfibusClearMode: (0x16b7, 1)>
- ProfibusMapSelection = <OtherParameters.ProfibusMapSelection: (0x16b8, 1)>
- ProfibusNodeAddress = <OtherParameters.ProfibusNodeAddress: (0x16b6, 1)>
- PulseInputLowerCut = <OtherParameters.PulseInputLowerCut: (0x163d, 1)>
- PulseTrainFrequencyBiasAmount = <OtherParameters.PulseTrainFrequencyBiasAmount: (0x163b, 1)>
- PulseTrainFrequencyFilterTimeConstant = <OtherParameters.PulseTrainFrequencyFilterTimeConstant: (0x163a, 1)>
- PulseTrainFrequencyLimit = <OtherParameters.PulseTrainFrequencyLimit: (0x163c, 1)>
- PulseTrainFrequencyScale = <OtherParameters.PulseTrainFrequencyScale: (0x1639, 1)>
- PulseTrainInputModeForFeedback = <OtherParameters.PulseTrainInputModeForFeedback: (0x1604, 1)>
- ReversePositionRangeSpecification = <OtherParameters.ReversePositionRangeSpecification: (0x1654, 2)>
- ReverseTorqueControlSpeedLimitValue = <OtherParameters.ReverseTorqueControlSpeedLimitValue: (0x1629, 2)>
- SavePositionAtPowerOff = <OtherParameters.SavePositionAtPowerOff: (0x165d, 1)>
- SerialCommunicationMode = <OtherParameters.SerialCommunicationMode: (0x16c8, 1)>
- SimplePositioning = <OtherParameters.SimplePositioning: (0x160c, 1)>
- SpeedDeviationErrorDetectionLevel = <OtherParameters.SpeedDeviationErrorDetectionLevel: (0x161b, 1)>
- SpeedTorqueControlSwitchingTime = <OtherParameters.SpeedTorqueControlSwitchingTime: (0x162b, 1)>
- TorqueBiasMode = <OtherParameters.TorqueBiasMode: (0x1624, 1)>
- TorqueBiasPolaritySelection = <OtherParameters.TorqueBiasPolaritySelection: (0x1626, 1)>
- TorqueBiasValue = <OtherParameters.TorqueBiasValue: (0x1625, 1)>
- TorqueReferenceInputSelection = <OtherParameters.TorqueReferenceInputSelection: (0x1621, 1)>
- TorqueReferenceSetting = <OtherParameters.TorqueReferenceSetting: (0x1622, 1)>
- ZeroReturnDirection = <OtherParameters.ZeroReturnDirection: (0x164f, 1)>
- ZeroReturnMode = <OtherParameters.ZeroReturnMode: (0x164e, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class Register(enum.Enum) |
| |
Register(value, names=None, *, module=None, qualname=None, type=None, start=1)
Base enum class for register address.
|
| |
- Method resolution order:
- Register
- enum.Enum
- builtins.object
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class SecondMotorFunctions(Register) |
| |
SecondMotorFunctions(value, names=None, *, module=None, qualname=None, type=None, start=1)
Second motor function group. See datasheet
sections 3-x and B-4 (pp. 344-346).
|
| |
- Method resolution order:
- SecondMotorFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AVRSelection = <SecondMotorFunctions.AVRSelection: (0x2269, 1)>
- AVRVoltageSelection = <SecondMotorFunctions.AVRVoltageSelection: (0x226a, 1)>
- Acc1ToAcc2FrequencyTransitionPoint = <SecondMotorFunctions.Acc1ToAcc2FrequencyTransitionPoint: (0x2279, 2)>
- AccelerationTime2 = <SecondMotorFunctions.AccelerationTime2: (0x2274, 2)>
- AutoTuningParameterIo = <SecondMotorFunctions.AutoTuningParameterIo: (0x252b, 1)>
- AutoTuningParameterJ = <SecondMotorFunctions.AutoTuningParameterJ: (0x252c, 2)>
- AutoTuningParameterR1 = <SecondMotorFunctions.AutoTuningParameterR1: (0x2525, 1)>
- AutoTuningParameterR2 = <SecondMotorFunctions.AutoTuningParameterR2: (0x2527, 1)>
- AutomaticTorqueBoostSlipCompensationGain = <SecondMotorFunctions.AutomaticTorqueBoostSlipCompensationGain: (0x2241, 1)>
- AutomaticTorqueBoostVoltageCompensationGain = <SecondMotorFunctions.AutomaticTorqueBoostVoltageCompensationGain: (0x2240, 1)>
- BaseFrequency = <SecondMotorFunctions.BaseFrequency: (0x2203, 1)>
- Dec1ToDec2FrequencyTransitionPoint = <SecondMotorFunctions.Dec1ToDec2FrequencyTransitionPoint: (0x227b, 2)>
- DecelerationTime2 = <SecondMotorFunctions.DecelerationTime2: (0x2276, 2)>
- ElectronicThermalCharacteristicsSelection = <SecondMotorFunctions.ElectronicThermalCharacteristicsSelection: (0x230d, 1)>
- ElectronicThermalLevel = <SecondMotorFunctions.ElectronicThermalLevel: (0x230c, 1)>
- FrequencyLowerLimit = <SecondMotorFunctions.FrequencyLowerLimit: (0x2251, 2)>
- FrequencyReferenceSelection = <SecondMotorFunctions.FrequencyReferenceSelection: (0x2201, 1)>
- FrequencyUpperLimit = <SecondMotorFunctions.FrequencyUpperLimit: (0x224f, 2)>
- H222 = <SecondMotorFunctions.H222: (0x251a, 1)>
- H232 = <SecondMotorFunctions.H232: (0x2529, 1)>
- ManualTorqueBoostFrequency = <SecondMotorFunctions.ManualTorqueBoostFrequency: (0x223d, 1)>
- ManualTorqueBoostVoltage = <SecondMotorFunctions.ManualTorqueBoostVoltage: (0x223c, 1)>
- MaximumFrequency = <SecondMotorFunctions.MaximumFrequency: (0x2204, 1)>
- MethodToSwitchToAcc2Dec2 = <SecondMotorFunctions.MethodToSwitchToAcc2Dec2: (0x2278, 1)>
- MotorCapacitySelection = <SecondMotorFunctions.MotorCapacitySelection: (0x2503, 1)>
- MotorParameterIo = <SecondMotorFunctions.MotorParameterIo: (0x251c, 1)>
- MotorParameterJ = <SecondMotorFunctions.MotorParameterJ: (0x251d, 2)>
- MotorParameterR1 = <SecondMotorFunctions.MotorParameterR1: (0x2516, 1)>
- MotorParameterR2 = <SecondMotorFunctions.MotorParameterR2: (0x2518, 1)>
- MotorParameterSelection = <SecondMotorFunctions.MotorParameterSelection: (0x2502, 1)>
- MotorPoleNumberSelection = <SecondMotorFunctions.MotorPoleNumberSelection: (0x2504, 1)>
- MultiStepSpeedReference0 = <SecondMotorFunctions.MultiStepSpeedReference0: (0x2216, 2)>
- OutputVoltageGain = <SecondMotorFunctions.OutputVoltageGain: (0x223f, 1)>
- OverloadLimitLevel = <SecondMotorFunctions.OverloadLimitLevel: (0x2317, 1)>
- OverloadLimitParameter = <SecondMotorFunctions.OverloadLimitParameter: (0x2318, 1)>
- OverloadLimitSelection = <SecondMotorFunctions.OverloadLimitSelection: (0x2316, 1)>
- OverloadWarningLevel = <SecondMotorFunctions.OverloadWarningLevel: (0x2429, 1)>
- RunCommandSelection = <SecondMotorFunctions.RunCommandSelection: (0x2202, 1)>
- SpeedResponse = <SecondMotorFunctions.SpeedResponse: (0x2506, 1)>
- TorqueBoostSelection = <SecondMotorFunctions.TorqueBoostSelection: (0x223b, 1)>
- VFCharacteristicsSelection = <SecondMotorFunctions.VFCharacteristicsSelection: (0x223e, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class StandardFunctions(Register) |
| |
StandardFunctions(value, names=None, *, module=None, qualname=None, type=None, start=1)
Standard function group. See datasheet
sections 3-5 (pp. 90-120) and B-4 (pp. 324-327).
|
| |
- Method resolution order:
- StandardFunctions
- Register
- enum.Enum
- builtins.object
Data and other attributes defined here:
- AVRDecelerationGain = <StandardFunctions.AVRDecelerationGain: (0x126c, 1)>
- AVRFilterTimeConstant = <StandardFunctions.AVRFilterTimeConstant: (0x126b, 1)>
- AVRSelection = <StandardFunctions.AVRSelection: (0x1269, 1)>
- AVRVoltageSelection = <StandardFunctions.AVRVoltageSelection: (0x126a, 1)>
- Acc1ToAcc2FrequencyTransitionPoint = <StandardFunctions.Acc1ToAcc2FrequencyTransitionPoint: (0x1279, 2)>
- AccelerationCurveParameter = <StandardFunctions.AccelerationCurveParameter: (0x12a5, 1)>
- AccelerationCurveSelection = <StandardFunctions.AccelerationCurveSelection: (0x127d, 1)>
- AccelerationStopFrequency = <StandardFunctions.AccelerationStopFrequency: (0x125c, 2)>
- AccelerationStopTime = <StandardFunctions.AccelerationStopTime: (0x125e, 1)>
- AccelerationTime2 = <StandardFunctions.AccelerationTime2: (0x1274, 2)>
- AutomaticTorqueBoostSlipCompensationGain = <StandardFunctions.AutomaticTorqueBoostSlipCompensationGain: (0x1241, 1)>
- AutomaticTorqueBoostVoltageCompensationGain = <StandardFunctions.AutomaticTorqueBoostVoltageCompensationGain: (0x1240, 1)>
- BaseFrequency = <StandardFunctions.BaseFrequency: (0x1203, 1)>
- CurrentInputActiveRangeEndFrequency = <StandardFunctions.CurrentInputActiveRangeEndFrequency: (0x1283, 2)>
- CurrentInputActiveRangeEndRatio = <StandardFunctions.CurrentInputActiveRangeEndRatio: (0x1286, 1)>
- CurrentInputActiveRangeStartFrequency = <StandardFunctions.CurrentInputActiveRangeStartFrequency: (0x1281, 2)>
- CurrentInputActiveRangeStartRatio = <StandardFunctions.CurrentInputActiveRangeStartRatio: (0x1285, 1)>
- CurrentInputStartFrequencyEnable = <StandardFunctions.CurrentInputStartFrequencyEnable: (0x1287, 1)>
- DCInjectionBrakingCarrierFrequency = <StandardFunctions.DCInjectionBrakingCarrierFrequency: (0x124d, 1)>
- DCInjectionBrakingDelayTime = <StandardFunctions.DCInjectionBrakingDelayTime: (0x1247, 1)>
- DCInjectionBrakingEnable = <StandardFunctions.DCInjectionBrakingEnable: (0x1245, 1)>
- DCInjectionBrakingFrequency = <StandardFunctions.DCInjectionBrakingFrequency: (0x1246, 1)>
- DCInjectionBrakingMethodSelection = <StandardFunctions.DCInjectionBrakingMethodSelection: (0x124a, 1)>
- DCInjectionBrakingPower = <StandardFunctions.DCInjectionBrakingPower: (0x1248, 1)>
- DCInjectionBrakingTime = <StandardFunctions.DCInjectionBrakingTime: (0x1249, 1)>
- Dec1ToDec2FrequencyTransitionPoint = <StandardFunctions.Dec1ToDec2FrequencyTransitionPoint: (0x127b, 2)>
- DecelerationCurveParameter = <StandardFunctions.DecelerationCurveParameter: (0x12a6, 1)>
- DecelerationCurveSelection = <StandardFunctions.DecelerationCurveSelection: (0x127e, 1)>
- DecelerationHoldFrequency = <StandardFunctions.DecelerationHoldFrequency: (0x12bd, 2)>
- DecelerationHoldTime = <StandardFunctions.DecelerationHoldTime: (0x12bf, 1)>
- DecelerationTime2 = <StandardFunctions.DecelerationTime2: (0x1276, 2)>
- DriveProgramming = <StandardFunctions.DriveProgramming: (0x1213, 1)>
- ELSCurveRatio1DuringAcceleration = <StandardFunctions.ELSCurveRatio1DuringAcceleration: (0x12b9, 1)>
- ELSCurveRatio1DuringDeceleration = <StandardFunctions.ELSCurveRatio1DuringDeceleration: (0x12bb, 1)>
- ELSCurveRatio2DuringAcceleration = <StandardFunctions.ELSCurveRatio2DuringAcceleration: (0x12ba, 1)>
- ELSCurveRatio2DuringDeceleration = <StandardFunctions.ELSCurveRatio2DuringDeceleration: (0x12bc, 1)>
- EnergySavingOperationMode = <StandardFunctions.EnergySavingOperationMode: (0x126d, 1)>
- EnergySavingResponseAccuracyAdjustment = <StandardFunctions.EnergySavingResponseAccuracyAdjustment: (0x126e, 1)>
- ExternalFrequencyFilterTimeConstant = <StandardFunctions.ExternalFrequencyFilterTimeConstant: (0x1212, 1)>
- FrequencyAdditionAmount = <StandardFunctions.FrequencyAdditionAmount: (0x12b3, 2)>
- FrequencyAdditionDirection = <StandardFunctions.FrequencyAdditionDirection: (0x12b5, 1)>
- FrequencyLowerLimit = <StandardFunctions.FrequencyLowerLimit: (0x1251, 2)>
- FrequencyReferenceSelection = <StandardFunctions.FrequencyReferenceSelection: (0x1201, 1)>
- FrequencyUpperLimit = <StandardFunctions.FrequencyUpperLimit: (0x124f, 2)>
- IOVoltageCurrentSelection = <StandardFunctions.IOVoltageCurrentSelection: (0x1205, 1)>
- JoggingFrequency = <StandardFunctions.JoggingFrequency: (0x1238, 1)>
- JoggingStopSelection = <StandardFunctions.JoggingStopSelection: (0x1239, 1)>
- JumpFrequency1 = <StandardFunctions.JumpFrequency1: (0x1253, 2)>
- JumpFrequency2 = <StandardFunctions.JumpFrequency2: (0x1256, 2)>
- JumpFrequency3 = <StandardFunctions.JumpFrequency3: (0x1259, 2)>
- JumpFrequencyWidth1 = <StandardFunctions.JumpFrequencyWidth1: (0x1255, 1)>
- JumpFrequencyWidth2 = <StandardFunctions.JumpFrequencyWidth2: (0x1258, 1)>
- JumpFrequencyWidth3 = <StandardFunctions.JumpFrequencyWidth3: (0x125b, 1)>
- ManualTorqueBoostFrequency = <StandardFunctions.ManualTorqueBoostFrequency: (0x123d, 1)>
- ManualTorqueBoostVoltage = <StandardFunctions.ManualTorqueBoostVoltage: (0x123c, 1)>
- MaximumFrequency = <StandardFunctions.MaximumFrequency: (0x1204, 1)>
- MethodToSwitchToAcc2Dec2 = <StandardFunctions.MethodToSwitchToAcc2Dec2: (0x1278, 1)>
- MultiStepSpeedReference0 = <StandardFunctions.MultiStepSpeedReference0: (0x1216, 2)>
- MultiStepSpeedReference1 = <StandardFunctions.MultiStepSpeedReference1: (0x1218, 2)>
- MultiStepSpeedReference10 = <StandardFunctions.MultiStepSpeedReference10: (0x122a, 2)>
- MultiStepSpeedReference11 = <StandardFunctions.MultiStepSpeedReference11: (0x122c, 2)>
- MultiStepSpeedReference12 = <StandardFunctions.MultiStepSpeedReference12: (0x122e, 2)>
- MultiStepSpeedReference13 = <StandardFunctions.MultiStepSpeedReference13: (0x1230, 2)>
- MultiStepSpeedReference14 = <StandardFunctions.MultiStepSpeedReference14: (0x1232, 2)>
- MultiStepSpeedReference15 = <StandardFunctions.MultiStepSpeedReference15: (0x1234, 2)>
- MultiStepSpeedReference2 = <StandardFunctions.MultiStepSpeedReference2: (0x121a, 2)>
- MultiStepSpeedReference3 = <StandardFunctions.MultiStepSpeedReference3: (0x121c, 2)>
- MultiStepSpeedReference4 = <StandardFunctions.MultiStepSpeedReference4: (0x121e, 2)>
- MultiStepSpeedReference5 = <StandardFunctions.MultiStepSpeedReference5: (0x1220, 2)>
- MultiStepSpeedReference6 = <StandardFunctions.MultiStepSpeedReference6: (0x1222, 2)>
- MultiStepSpeedReference7 = <StandardFunctions.MultiStepSpeedReference7: (0x1224, 2)>
- MultiStepSpeedReference8 = <StandardFunctions.MultiStepSpeedReference8: (0x1226, 2)>
- MultiStepSpeedReference9 = <StandardFunctions.MultiStepSpeedReference9: (0x1228, 2)>
- MultiStepSpeedSelection = <StandardFunctions.MultiStepSpeedSelection: (0x1215, 1)>
- OperationFrequencyInputASelection = <StandardFunctions.OperationFrequencyInputASelection: (0x12af, 1)>
- OperationFrequencyInputBSelection = <StandardFunctions.OperationFrequencyInputBSelection: (0x12b0, 1)>
- OperationSelection = <StandardFunctions.OperationSelection: (0x12b1, 1)>
- OutputVoltageGain = <StandardFunctions.OutputVoltageGain: (0x123f, 1)>
- PIDDGain = <StandardFunctions.PIDDGain: (0x1262, 1)>
- PIDFeedForwardSelection = <StandardFunctions.PIDFeedForwardSelection: (0x1267, 1)>
- PIDFeedbackSelection = <StandardFunctions.PIDFeedbackSelection: (0x1264, 1)>
- PIDIGain = <StandardFunctions.PIDIGain: (0x1261, 1)>
- PIDOutputLimitFunction = <StandardFunctions.PIDOutputLimitFunction: (0x1266, 1)>
- PIDPGain = <StandardFunctions.PIDPGain: (0x1260, 1)>
- PIDScale = <StandardFunctions.PIDScale: (0x1263, 1)>
- PIDSelection = <StandardFunctions.PIDSelection: (0x125f, 1)>
- PIDSleepFunctionActionDelayTime = <StandardFunctions.PIDSleepFunctionActionDelayTime: (0x12c2, 1)>
- PIDSleepFunctionActionThreshold = <StandardFunctions.PIDSleepFunctionActionThreshold: (0x12c0, 2)>
- ReversePIDFunction = <StandardFunctions.ReversePIDFunction: (0x1265, 1)>
- RunCommandSelection = <StandardFunctions.RunCommandSelection: (0x1202, 1)>
- StartupDCInjectionBrakingPower = <StandardFunctions.StartupDCInjectionBrakingPower: (0x124b, 1)>
- StartupDCInjectionBrakingTime = <StandardFunctions.StartupDCInjectionBrakingTime: (0x124c, 1)>
- TorqueBoostSelection = <StandardFunctions.TorqueBoostSelection: (0x123b, 1)>
- VFCharacteristicsSelection = <StandardFunctions.VFCharacteristicsSelection: (0x123e, 1)>
- VRInputActiveRangeEndFrequency = <StandardFunctions.VRInputActiveRangeEndFrequency: (0x12c8, 2)>
- VRInputActiveRangeEndVoltage = <StandardFunctions.VRInputActiveRangeEndVoltage: (0x12cb, 1)>
- VRInputActiveRangeStartCurrent = <StandardFunctions.VRInputActiveRangeStartCurrent: (0x12ca, 1)>
- VRInputActiveRangeStartFrequency = <StandardFunctions.VRInputActiveRangeStartFrequency: (0x12c6, 2)>
- VRInputStartFrequencyEnable = <StandardFunctions.VRInputStartFrequencyEnable: (0x12cc, 1)>
- VoltageEndFrequency = <StandardFunctions.VoltageEndFrequency: (0x120d, 2)>
- VoltageEndRatio = <StandardFunctions.VoltageEndRatio: (0x1210, 1)>
- VoltageStartFrequency = <StandardFunctions.VoltageStartFrequency: (0x120b, 2)>
- VoltageStartRatio = <StandardFunctions.VoltageStartRatio: (0x120f, 1)>
- VoltageStartSelection = <StandardFunctions.VoltageStartSelection: (0x1211, 1)>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
|
class TripFactor(enum.IntEnum) |
| |
TripFactor(value, names=None, *, module=None, qualname=None, type=None, start=1)
Codes identifying the reason of a trip event
(datasheet section B-4 p. 421).
|
| |
- Method resolution order:
- TripFactor
- enum.IntEnum
- builtins.int
- enum.Enum
- builtins.object
Data and other attributes defined here:
- BrakingError = <TripFactor.BrakingError: 36>
- BrakingResistorOverloadProtection = <TripFactor.BrakingResistorOverloadProtection: 6>
- CPUError = <TripFactor.CPUError: 11>
- CPUErrorAlt = <TripFactor.CPUErrorAlt: 22>
- CurrentDetectionError = <TripFactor.CurrentDetectionError: 10>
- DriverError = <TripFactor.DriverError: 30>
- EEPROMError = <TripFactor.EEPROMError: 8>
- EasySequenceExecutionError = <TripFactor.EasySequenceExecutionError: 45>
- EasySequenceUserTrip0 = <TripFactor.EasySequenceUserTrip0: 50>
- EasySequenceUserTrip1 = <TripFactor.EasySequenceUserTrip1: 51>
- EasySequenceUserTrip2 = <TripFactor.EasySequenceUserTrip2: 52>
- EasySequenceUserTrip3 = <TripFactor.EasySequenceUserTrip3: 53>
- EasySequenceUserTrip4 = <TripFactor.EasySequenceUserTrip4: 54>
- EasySequenceUserTrip5 = <TripFactor.EasySequenceUserTrip5: 55>
- EasySequenceUserTrip6 = <TripFactor.EasySequenceUserTrip6: 56>
- EasySequenceUserTrip7 = <TripFactor.EasySequenceUserTrip7: 57>
- EasySequenceUserTrip8 = <TripFactor.EasySequenceUserTrip8: 58>
- EasySequenceUserTrip9 = <TripFactor.EasySequenceUserTrip9: 59>
- EncoderDisconnection = <TripFactor.EncoderDisconnection: 80>
- ExcessiveSpeed = <TripFactor.ExcessiveSpeed: 81>
- ExternalTrip = <TripFactor.ExternalTrip: 12>
- GroundFaultProtection = <TripFactor.GroundFaultProtection: 14>
- InputOvervoltageProtection = <TripFactor.InputOvervoltageProtection: 15>
- InvalidInstruction = <TripFactor.InvalidInstruction: 43>
- InvalidNestingCount = <TripFactor.InvalidNestingCount: 44>
- InverterThermalTrip = <TripFactor.InverterThermalTrip: 21>
- LowSpeedOverloadProtection = <TripFactor.LowSpeedOverloadProtection: 38>
- MainCircuitError = <TripFactor.MainCircuitError: 25>
- ModbusCommunicationError = <TripFactor.ModbusCommunicationError: 41>
- NoFactor = <TripFactor.NoFactor: 0>
- OperatorConnection = <TripFactor.OperatorConnection: 40>
- OptionError0 = <TripFactor.OptionError0: 60>
- OptionError1 = <TripFactor.OptionError1: 61>
- OptionError2 = <TripFactor.OptionError2: 62>
- OptionError3 = <TripFactor.OptionError3: 63>
- OptionError4 = <TripFactor.OptionError4: 64>
- OptionError5 = <TripFactor.OptionError5: 65>
- OptionError6 = <TripFactor.OptionError6: 66>
- OptionError7 = <TripFactor.OptionError7: 67>
- OptionError8 = <TripFactor.OptionError8: 68>
- OptionError9 = <TripFactor.OptionError9: 69>
- OverCurrentAtConstantSpeed = <TripFactor.OverCurrentAtConstantSpeed: 1>
- OverCurrentDuringAcceleration = <TripFactor.OverCurrentDuringAcceleration: 3>
- OverCurrentDuringDeceleration = <TripFactor.OverCurrentDuringDeceleration: 2>
- OverCurrentInOtherCondition = <TripFactor.OverCurrentInOtherCondition: 4>
- OverloadProtection = <TripFactor.OverloadProtection: 5>
- OvervoltageProtection = <TripFactor.OvervoltageProtection: 7>
- PositionControlRangeTrip = <TripFactor.PositionControlRangeTrip: 83>
- SafeStop = <TripFactor.SafeStop: 37>
- ThermistorError = <TripFactor.ThermistorError: 35>
- USPError = <TripFactor.USPError: 13>
- UndervoltageProtection = <TripFactor.UndervoltageProtection: 9>
Data descriptors inherited from enum.Enum:
- name
- The name of the Enum member.
- value
- The value of the Enum member.
Readonly properties inherited from enum.EnumMeta:
- __members__
- Returns a mapping of member name->value.
This mapping lists all enum members, including aliases. Note that this
is a read-only view of the internal mapping.
| |