(a10,1x,a5)          ! format code (model component, model decision)
multiplc_e RFERR     ! (1) rainfall error
tension1_1 ARCH1     ! (2) upper-layer architecture
fixedsiz_2 ARCH2     ! (3) lower-layer architecture and baseflow
arno_x_vic QSURF     ! (4) surface runoff
perc_lower QPERC     ! (5) percolation
rootweight ESOIL     ! (6) evaporation
intflwnone QINTF     ! (7) interflow
rout_gamma Q_TDH     ! (8) time delay in runoff
temp_index SNOWM     ! (9) snow model
0                    ! naming convention for model (0=full, 1=index + numrx)
---------------------------------------------------------------------------
---------------------------------------------------------------------------
(nothing is read below this point) fuseConfigID=902 (template - actual config set by FUSE_DECISION_OPTIONS)
---------------------------------------------------------------------------
(1) rainfall error
additive_e      ! additive rainfall error
multiplc_e      ! multiplicative rainfall error
---------------------------------------------------------------------------
(2) upper-layer architecture
tension1_1      ! upper layer broken up into tension and free storage
tension2_1      ! tension storage sub-divided into recharge and excess
onestate_1      ! upper layer defined by a single state variable
---------------------------------------------------------------------------
(3) lower-layer architecture and baseflow
tens2pll_2      ! tension reservoir plus two parallel tanks
unlimfrc_2      ! baseflow resvr of unlimited size (0-HUGE), frac rate
unlimpow_2      ! baseflow resvr of unlimited size (0-HUGE), power recession
fixedsiz_2      ! baseflow reservoir of fixed size
---------------------------------------------------------------------------
(4) surface runoff
arno_x_vic      ! ARNO/Xzang/VIC parameterization (upper zone control)
prms_varnt      ! PRMS variant (fraction of upper tension storage)
tmdl_param      ! TOPMODEL parameterization (only valid for TOPMODEL qb)
---------------------------------------------------------------------------
(5) percolation
perc_f2sat      ! water from (field cap to sat) avail for percolation
perc_w2sat      ! water from (wilt pt to sat) avail for percolation
perc_lower      ! perc defined by moisture content in lower layer (SAC)
---------------------------------------------------------------------------
(6) evaporation
sequential      ! sequential evaporation model
rootweight      ! root weighting
---------------------------------------------------------------------------
(7) interflow
intflwnone      ! no interflow
intflwsome      ! interflow
---------------------------------------------------------------------------
(8) time delay in runoff
rout_gamma      ! use a Gamma distribution with shape parameter = 2.5
no_routing      ! no routing
---------------------------------------------------------------------------
(9) snow model
temp_index      ! temperature index snow model
no_snowmod      ! no snow model
---------------------------------------------------------------------------
